# name
Journal of Materials in Civil Engineering

# publicationVenueFor[].label
Prediction of Soil-Water Characteristic Curve for Unbound Material Using Fredlund-Xing Equation-Based ANN Approach

# publicationVenueFor[].label
Method for performing accelerated characterization of viscoelastic constitutive behavior of asphaltic concrete

# publicationVenueFor[].label
Porosity of the Dominant Aggregate Size Range to Evaluate Coarse Aggregate Structure of Asphalt Mixtures

# publicationVenueFor[].label
Laboratory Investigation of Influencing Factors on Early-Age Delamination in CRC Pavements

# publicationVenueFor[].label
Characterization of Crack Growth Rate of Sulfur-Extended Asphalt Mixtures Using Cyclic Semicircular Bending Test

# publicationVenueFor[].label
Incorporating Disparity in Temperature Sensitivity of Asphalt Binders into High-Temperature Specifications

# publicationVenueFor[].label
Analysis of the ASTM C512 Spring-Loaded CREEP Frame

# publicationVenueFor[].label
Fatigue and healing characterization of asphalt mixtures

# publicationVenueFor[].label
Comparison of Permeability of Cementitious Materials Obtained via Poromechanical and Conventional Experiments

# publicationVenueFor[].label
Permanent deformation characterization of subgrade soils from RLT test

# publicationVenueFor[].label
SEM Analysis on Fracture and Healing of SandAsphalt Mixtures

# publicationVenueFor[].label
Experimental Measurement of Water Diffusion through Fine Aggregate Mixtures

# publicationVenueFor[].label
Sulfate Attack on Concrete: Effect of Partial Immersion

# publicationVenueFor[].label
Influence of air void distribution on the moisture susceptibility of asphalt mixes

# publicationVenueFor[].label
Unique effects of hydrated lime filler on the performance-related properties of asphalt cements: Physical and chemical interactions revisited

# publicationVenueFor[].label
Flowability and Density Characteristics of Controlled Low-Strength Material Using Native High-Plasticity Clay

# publicationVenueFor[].label
Effect of Synthetic Geotextile on Stabilization of Expansive Subgrades: Experimental Study

# publicationVenueFor[].label
New Approach for Predicting Particle Breakage of Granular Material Using the Grey System Theory

# publicationVenueFor[].label
Application of Microcalorimeter to Characterize Adhesion between Asphalt Binders and Aggregates

# publicationVenueFor[].label
Carbon Nanotubes and Carbon Nanofibers for Enhancing the Mechanical Properties of Nanocomposite Cementitious Materials

# publicationVenueFor[].label
Finite-Element Modeling and Calibration of Temperature Prediction of Hydrating Portland Cement Concrete Pavements

# publicationVenueFor[].label
Method for Predicting the Laboratory Compaction Behavior of Asphalt Mixtures

# publicationVenueFor[].label
Weak Form Equation-Based Finite-Element Modeling of Viscoelastic Asphalt Mixtures

# publicationVenueFor[].label
Effective Reduction of Cement Content in Pavement Concrete Mixtures Based on Theoretical and Experimental Particle Packing Methods

# publicationVenueFor[].label
Strategies for Producing Asphalt Mixtures with High RAP Content

# publicationVenueFor[].label
Effect of Aggregate Type and Size on Surface Resistivity Testing

# publicationVenueFor[].label
Characterization of Air Void Distribution in Asphalt Mixes using X-ray Computed Tomography

# publicationVenueFor[].label
Pavement Subgrade Stabilization Using Polymers: Characterization and Performance

# publicationVenueFor[].label
Characterization of Cement-Polymer-Treated Soils under Repeated Loading

# publicationVenueFor[].label
Evaluation of Moisture Susceptibility Minimization Strategies for Warm-Mix Asphalt: Case Study

# publicationVenueFor[].label
Quantitative Comparison of Energy Methods to Characterize Fatigue in Asphalt Materials

# publicationVenueFor[].label
Predicting Residual Tensile Strength of Seven-Wire Strands Using That of Single Wires Exposed to Chloride Environments

# publicationVenueFor[].label
Compressibility and collapsibility characteristics of sedimented fly ash beds

# publicationVenueFor[].label
Three-Dimensional Simulations of Asphalt Pavement Permanent Deformation Using a Nonlinear Viscoelastic and Viscoplastic Model

# publicationVenueFor[].label
Application of advances in materials chemistry and mineralogy in soil stabilization

# publicationVenueFor[].label
Sustainable Reuse of Limestone Quarry Fines and RAP in Pavement Base/Subbase Layers

# publicationVenueFor[].label
Probabilistic Models for the Tensile Strength of Corroding Strands in Posttensioned Segmental Concrete Bridges

# publicationVenueFor[].label
Stochastic Identification of Linear-Viscoelastic Models of Aged and Unaged Asphalt Mixtures

# publicationVenueFor[].label
Structural Characterization of Micromechanical Properties in Asphalt Using Atomic Force Microscopy

# publicationVenueFor[].label
Identification of Acoustic Emission Signatures and Their Capability to Assess the Damage of Reinforced Concrete Beam under Incremental Cyclic Loading

# publicationVenueFor[].label
Modeling Pavement Temperature for Use in Binder Oxidation Models and Pavement Performance Prediction

# publicationVenueFor[].label
Correlating the Asphalt-Binder BBR Test Data to the HMA (ML-OT) Fracture Properties

# publicationVenueFor[].label
Influence of Air Void Distribution on the Moisture Susceptibility of Asphalt Mixes

# publicationVenueFor[].label
Development of Dilatometer Test Method to Measure Coefficient of Thermal Expansion of Aggregates

# publicationVenueFor[].label
Evaluation of Moisture Susceptibility Minimization Strategies for Warm-Mix Asphalt: Case Study

# publicationVenueFor[].label
Damage-induced modeling of asphalt mixtures through computational micromechanics and cohesive zone fracture

# publicationVenueFor[].label
Determination of the Main Parameters of Alkali Silica Reaction Using System Identification Method

# publicationVenueFor[].label
Age and Moisture Effects on Thermal Expansion of Concrete Pavement Slabs

# publicationVenueFor[].label
Micromechanics-Based Analysis of Stiffness Anisotropy in Asphalt Mixtures

# publicationVenueFor[].label
Analytical derivation of permeability and numerical simulation of fluid flow in hot-mix asphalt

# publicationVenueFor[].label
Relationship between the Representative Volume Element and Mechanical Properties of Asphalt Concrete

# publicationVenueFor[].label
Improved Infiltration Modeling for Partially Sealed Joints in Concrete Pavement Design

# publicationVenueFor[].label
Porosity fluctuations in desiccating samples of grout-stabilized soil

# publicationVenueFor[].label
Comprehensive Evaluation of AIMS Texture, Angularity, and Dimension Measurements

# publicationVenueFor[].label
Testing the Effectiveness of Class C and Class F Fly Ash in Controlling Expansion due to Alkali-Silica Reaction Using Modified ASTM C 1260 Test Method

# publicationVenueFor[].label
Thermal Conductivity of Quartz Sands by Thermo-Time Domain Reflectometry Probe and Model Prediction

# publicationVenueFor[].label
Visualization of Civil Infrastructure Emphasizing Geomaterial Characterization and Performance

# publicationVenueFor[].label
Poromechanical Damping of Cementitious Materials

# publicationVenueFor[].label
Use of Lightweight ECS as a Fill Material to Control Approach Embankment Settlements

# publicationVenueFor[].label
Comparing Superpave Gyratory Compactor Data to Field Cores

# publicationVenueFor[].label
Closure to Effect of Synthetic Geotextile on Stabilization of Expansive Subgrades: Experimental Study

# publicationVenueFor[].label
Discrete Element Analysis of the Influences of Aggregate Properties and Internal Structure on Fracture in Asphalt Mixtures

# publicationVenueFor[].label
Characterization of Asphalt Mix Response under Repeated Loading Using Anisotropic Nonlinear Viscoelastic-Viscoplastic Model

# publicationVenueFor[].label
Evolution of the Microstructure of Warm Mix Asphalt Binders with Aging in an Accelerated Weathering Tester

# publicationVenueFor[].label
Forensic Investigations to Evaluate Sulfate-Induced Heave Attack on a Tunnel Shotcrete Liner

# publicationVenueFor[].label
Effects of inorganic and polymer filler on tertiary damage development in asphalt mixtures

# publicationVenueFor[].label
Evaluation of moisture damage mechanisms and effects of hydrated lime in asphalt mixtures through measurements of mixture component properties and performance testing

# publicationVenueFor[].label
Linear viscoelastic analysis of asphalt mastics

# publicationVenueFor[].label
Experimental Methods for the Evaluation of Aggregate Resistance to Polishing, Abrasion, and Breakage

# publicationVenueFor[].label
Resilient Moduli Response of Moderately Cement-Treated Reclaimed Asphalt Pavement Aggregates

# publicationVenueFor[].label
Volume Measurement of Expansive Soils and Its Application during the Design of a Retaining Wall in Texas

# publicationVenueFor[].label
Advances in Microstructure Characterization, Micromechanics, and Constitutive Modeling of Hot Mix Asphalt

# publicationVenueFor[].label
Closure to "Volume change behaviors of expansive soils stabilized with recycled ashes and fibers" by Koonnamas Punthutaecha, Anand J. Puppala, Pai K. Vanapalli, and Hilary Inyang

# publicationVenueFor[].label
Strength and Stiffness Characterization of Controlled Low-Strength Material Using Native High-Plasticity Clay

# publicationVenueFor[].label
Volume change behaviors of expansive soils stabilized with recycled ashes and fibers

# publicationVenueFor[].label
Stone-on-Stone Contact of Permeable Friction Course Mixtures

# publicationVenueFor[].label
Identification of the Composite Relaxation Modulus of Asphalt Binder Using AFM Nanoindentation

# publicationVenueFor[].label
Three-Dimensional Microstructural Modeling Framework for Dense-Graded Asphalt Concrete Using a Coupled Viscoelastic, Viscoplastic, and Viscodamage Model

# publicationVenueFor[].label
Development of a New Mechanistic Empirical Rutting Model for Unbound Granular Material

# publicationVenueFor[].label
Quality Assurance Method for Assessment of Stiffness of Pipeline Bedding Material

# publicationVenueFor[].label
Laboratory Evaluation of the Workability and Compactability of Asphaltic Materials prior to Road Construction

# publicationVenueFor[].label
Factors affecting binder properties between production and construction

# publicationVenueFor[].label
Static Creep and Repeated Load as Rutting Performance Tests for Airport HMA Mix Design

# publicationVenueFor[].label
Micromechanical Model for Heterogeneous Asphalt Concrete Mixtures Subjected to Fracture Failure

# publicationVenueFor[].label
Testing and Modeling Composite Coatings with Silanes for Protecting Reinforced Concrete in Saltwater Environment

# publicationVenueFor[].label
Performance-Related Specifications for PCC Pavements in Kansas

# publicationVenueFor[].label
Characteristics of Asphalt Binders Foamed in the Laboratory to Produce Warm Mix Asphalt

# publicationVenueFor[].label
Estimating Volume Fraction of Free Water in Hardening Concrete by Interpretation of Dielectric Constant

# publicationVenueFor[].label
Use of Molecular Dynamics to Investigate Self-Healing Mechanisms in Asphalt Binders

# publicationVenueFor[].label
Microstructure and fracture in asphalt mixtures using a boundary element approach

# publicationVenueFor[].label
Utilization of Silica Fume to Stabilize the Dispersion of Carbon Nanofilaments in Cement Paste

# publicationVenueFor[].label
Quantification of Damage in the Dynamic Complex Modulus and Flow Number Tests Using X-Ray Computed Tomography

# publicationVenueFor[].label
Evaluation of Effects of Filler By-Products on Fine Aggregate Matrix Viscoelasticity and Fatigue-Fracture Characteristics

# publicationVenueFor[].label
Drainability of Permeable Friction Course Mixtures

# publicationVenueFor[].label
New Performance-Based Approach to Ensure Quality Curing during Construction

# publicationVenueFor[].label
Review of stabilization of clays and expansive solis in pavements and lightly loaded structures - History, practice, and future

# publicationVenueFor[].label
Experimental Testing and Finite-Element Modeling to Evaluate the Effects of Aggregate Angularity on Bituminous Mixture Performance

# publicationVenueFor[].label
Coupled Micromechanical Model of Moisture-Induced Damage in Asphalt Mixtures

# publicationVenueFor[].label
Prediction of Hot Mix Asphalt Stability Using the Superpave Gyratory Compactor

# publicationVenueFor[].label
Linear and nonlinear viscoelastic analysis of the microstructure of asphalt concretes

# publicationVenueFor[].label
Multiscale Characterization of Fly Ash-Based Geopolymer and Type V Portland Cement Exposed to MgSO4

# publicationVenueFor[].label
Sulfate-Heaving Studies on Chemically Treated Sulfate-Rich Geomaterials

# publicationVenueFor[].label
Mechanical Property Prediction for High Early Strength Self-Consolidating Concrete

# publicationVenueFor[].label
Characterization of microdamage and healing of asphalt concrete mixtures

# publicationVenueFor[].label
Geomaterial Characterization and Stability Assessment of Hydraulic Fill Dams

# publicationVenueFor[].label
Experimental Measurement and Numerical Simulation of Water Vapor Diffusion through Asphalt Pavement Materials

# publicationVenueFor[].label
Ternary and multivariate quality gradation for hot control charts of aggregate mix asphalt

# publicationVenueFor[].label
Analysis of Rutting Prediction Criteria Using a Nonlinear Viscoelastic Model

# publicationVenueFor[].label
Durability and Permanency Studies in Sulfate-Laden Soils Treated with Nano- and Crystalline Silica-Based Admixtures

# publicationVenueFor[].label
Accelerated Autogenous Healing of Concrete Pipe Sections with Crack and Decalcification Damage

# publicationVenueFor[].label
Moisture Content-Based Longitudinal Cracking Prediction and Evaluation Model for Low-Volume Roads over Expansive Soils

# publicationVenueFor[].label
Poromechanical Damping of Cementitious Materials

# publicationVenueFor[].label
Bitumen surface energy characterization using a contact angle approach