# publicationVenueFor[].label
Elevated temperature mechanical properties of Inconel 617 surface oxide using nanoindentation

# publicationVenueFor[].label
Influence of cold work and heat treatment on the shape memory effect and plastic strain development of NiTi

# publicationVenueFor[].label
On the notch ductility of a magnesium-rare earth alloy

# publicationVenueFor[].label
Effect of severe plastic deformation on tensile properties and impact toughness of two-phase Zn-40Al alloy

# publicationVenueFor[].label
Nonlinear constitutive equation for vapor-grown carbon nanofiber-reinforced SC-15 epoxy at different strain rate

# publicationVenueFor[].label
Thermal and mechanical properties of Al/Al2O3 composites at elevated temperatures

# publicationVenueFor[].label
High-temperature dependency of elastic mechanical behavior of two wrought magnesium alloys AZ31B and ZK60A studied by resonant ultrasound spectroscopy

# publicationVenueFor[].label
Microstructural refinement in an ultra-high strength martensitic steel via equal channel angular pressing

# publicationVenueFor[].label
ISSUES IN THE FINITE-ELEMENT MODELING OF POLYPHASE PLASTICITY

# publicationVenueFor[].label
The effect of dynamic aging on the cyclic stability of Cu73Al16Mn11 shape memory alloy

# publicationVenueFor[].label
Order of magnitude increase in actuation fatigue lifetime through partial austenitic transformation of NiTiHf high-temperature shape memory alloys

# publicationVenueFor[].label
Effect of equal-channel angular extrusion on the mechanical and tribological properties of as-cast Zn-40Al-2Cu-2Si alloy

# publicationVenueFor[].label
Effect of fine gamma ' precipitation on non-isothermal creep and creep-fatigue behaviour of nickel base superalloy MC2

# publicationVenueFor[].label
Molecular dynamics simulations of 1/2 a1 1 1 screw dislocation in Ta

# publicationVenueFor[].label
Influence of crystallographic compatibility on residual strain of TiNi based shape memory alloys during thermo-mechanical cycling

# publicationVenueFor[].label
Discrete dislocation modeling in three-dimensional confined volumes

# publicationVenueFor[].label
Microstructure and porosity in thixomolded Mg alloys and minimizing adverse effects on formability

# publicationVenueFor[].label
3-DIMENSIONAL ANALYSIS OF CREEP IN A METAL MATRIX COMPOSITE

# publicationVenueFor[].label
Microstructures and recrystallization behavior of severely hot-deformed tungsten

# publicationVenueFor[].label
Deformation twinning in difficult-to-work alloys during severe plastic deformation

# publicationVenueFor[].label
Reduction in tension-compression asymmetry via grain refinement and texture design in Mg-3Al-1Zn sheets

# publicationVenueFor[].label
Phase constitution effect on the ductility of low alloy multiphase transformation induced plasticity steels

# publicationVenueFor[].label
On characterizing the mechanical properties of aluminum-alumina composites

# publicationVenueFor[].label
On the stability of the creep substructure in NaCl single crystals

# publicationVenueFor[].label
Flow response of a severe plastically deformed two-phase zinc-aluminum alloy

# publicationVenueFor[].label
Common trends in texture evolution of ultra-fine-grained hcp materials during equal channel angular extrusion

# publicationVenueFor[].label
Cyclic stability of ultrafine-grained interstitial-free steel at elevated temperatures

# publicationVenueFor[].label
A CONCEPTUAL-FRAMEWORK FOR INTERPRETATION OF MMC-FATIGUE

# publicationVenueFor[].label
Morphology and distribution of martensite in dual phase (DP980) steel and its relation to the multiscale mechanical behavior

# publicationVenueFor[].label
PREPARATION OF HIGH-TC THALLIUM-BASED SUPERCONDUCTING FILMS FROM COCONDENSED AMORPHOUS METAL PRECURSORS

# publicationVenueFor[].label
A comparison between the irradiation damage response of spinel and zirconia due to Xe ion bombardment

# publicationVenueFor[].label
Modeling of the variant reorientation in magnetic shape-memory alloys under complex magnetomechanical loading

# publicationVenueFor[].label
Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets

# publicationVenueFor[].label
Creep substructure formation in sodium chloride single crystals in the power law and exponential creep regimes

# publicationVenueFor[].label
Cyclic deformation behavior of single crystal NiTi

# publicationVenueFor[].label
Actuation fatigue performance of NiTiZr and comparison to NiTiHf high temperature shape memory alloys

# publicationVenueFor[].label
2D dislocation dynamics in thin metal layers

# publicationVenueFor[].label
Interfacial study of NiTi-Ti3SiC2 solid state diffusion bonded joints

# publicationVenueFor[].label
On the exceptionally high ductility of Mg-2Zn-0.3Ca-0.2Ce-0.1Mn alloy

# publicationVenueFor[].label
Flow transitions and flow localization in large-strain deformation of magnesium alloy

# publicationVenueFor[].label
Microstructure, crystallographic texture, and plastic anisotropy evolution in an Mg alloy during equal channel angular extrusion processing

# publicationVenueFor[].label
High strain-rate response and deformation mechanisms in polycrystalline Ti2AlC

# publicationVenueFor[].label
Equal-channel angular sheet extrusion of interstitial-free (IF) steel: Microstructural evolution and mechanical properties

# publicationVenueFor[].label
Orientation dependence of the effect of short-range ordering on the plastic deformation of a medium entropy alloy

# publicationVenueFor[].label
Microstructure and properties of nanocrystalline copper-niobium alloy with high strength and high conductivity

# publicationVenueFor[].label
Mechanical response of fine grained Ti2AlC under extreme thermo-mechanical loading conditions

# publicationVenueFor[].label
Creep of a thermally stable nanocrystalline nickel tungsten alloy as measured by high temperature nanoindentation

# publicationVenueFor[].label
Radiation response of FeTiO3, MgTiO3, and -Al2O3

# publicationVenueFor[].label
Silicon morphology modification in the eutectic Al-Si alloy using mechanical mold vibration

# publicationVenueFor[].label
Depth-resolved residual stress analysis of thin coatings by a new FIBDIC method

# publicationVenueFor[].label
Numerical simulation of gamma/gamma ' microstructural evolutions induced by TCP-phase in the MC2 nickel base single crystal superalloy

# publicationVenueFor[].label
Mechanical flow anisotropy in severely deformed pure titanium

# publicationVenueFor[].label
Effect of commercial purity levels on the mechanical properties of ultrafine-grained titanium

# publicationVenueFor[].label
Improvement of formability of ultrafine-grained materials by post-SPD annealing

# publicationVenueFor[].label
Twinning in [001]-oriented single crystals of CoCrFeMnNi high-entropy alloy at tensile deformation

# publicationVenueFor[].label
Comments on the paper Does the subgrain size influence the rate of creep?

# publicationVenueFor[].label
A discrete dislocation plasticity analysis of grain-size strengthening

# publicationVenueFor[].label
Thermal stability of ultrafine grained Fe-Cr-Ni alloy

# publicationVenueFor[].label
Observations of the mechanical response and evolution of damage of AA 6061-T6 under different strain rates and temperatures

# publicationVenueFor[].label
Embedded magnetic shape memory sensory particles in lightweight composites for crack detection

# publicationVenueFor[].label
Structural, physical and mechanical properties of Ti-3(Al1-xSix)C-2 solid solution with x=0-1

# publicationVenueFor[].label
Compressive behavior of a rolled open-cell aluminum foam

# publicationVenueFor[].label
Processing microstructure property relationships in severely deformed tantalum

# publicationVenueFor[].label
Monitoring the fatigue-induced damage evolution in ultrafine-grained interstitial-free steel utilizing digital image correlation

# publicationVenueFor[].label
A discrete dislocation analysis of rate effects on mode I crack growth

# publicationVenueFor[].label
Cyclic stress-strain response and low-cycle fatigue damage in ultrafine grained copper

# publicationVenueFor[].label
Role of nano-precipitation on the microstructure and shape memory characteristics of a new Ni50.3Ti34.7Zr15 shape memory alloy

# publicationVenueFor[].label
Crack growth across colony boundaries in binary lamellar TiAl

# publicationVenueFor[].label
Role of thermally-stable deformation twins on the high-temperature mechanical response of an austenitic stainless steel

# publicationVenueFor[].label
Ex-situ X-ray tomography characterization of porosity during high-temperature creep in a Ni-based single-crystal superalloy: Toward understanding what damage is

# publicationVenueFor[].label
Dynamic behaviors of body-centered cubic metals with ultrafine grained and nanocrystalline microstructures

# publicationVenueFor[].label
Orientation dependence of twinning in single crystalline CoCrFeMnNi high-entropy alloy

# publicationVenueFor[].label
Hierarchical evolution and thermal stability of microstructure with deformation twins in 316 stainless steel

# publicationVenueFor[].label
PROCEEDINGS OF THE SYMPOSIUM ON INTERFACIAL PHENOMENA IN COMPOSITES - PROCESSING CHARACTERIZATION AND MECHANICAL-PROPERTIES, NEWPORT, RI, USA, JUNE 1-3, 1988 - PREFACE

# publicationVenueFor[].label
AN ANALYSIS OF THE EFFECT OF RESIDUAL-STRESSES ON DEFORMATION AND DAMAGE MECHANISMS IN AL-SIC COMPOSITES

# publicationVenueFor[].label
Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion

# publicationVenueFor[].label
Implications of post-processing induced microstructural changes on the deformation and fracture response of additively manufactured Ti-6Al-4V

# publicationVenueFor[].label
ELECTRON-TRANSPORT PROPERTIES OF PSEUDO-BINARY AMORPHOUS TRANSITION METAL-SIMPLE METAL (AI) ALLOYS

# publicationVenueFor[].label
Temperature and grain size dependent plastic instability and strain rate sensitivity of ultrafine grained austenitic Fe-14Cr-16Ni alloy

# publicationVenueFor[].label
The effect of training on two-way shape memory effect of binary NiTi and NiTi based ternary high temperature shape memory alloys

# publicationVenueFor[].label
Thermally and stress-induced martensitic transformation in Co-Ni-Al ferromagnetic shape memory alloy single crystals

# publicationVenueFor[].label
Strain-rate dependent deformation mechanisms in single-layered Cu, Mo, and multilayer Cu/Mo thin films

# publicationVenueFor[].label
Influences of composition and grain size on creeprupture behavior of Inconel alloy 740

# publicationVenueFor[].label
Numerical simulations of transient-stage Ostwald ripening and coalescence in two dimensions

# publicationVenueFor[].label
Mechanical twinning in Ni-based single crystal superalloys during multiaxial creep at 1050 degrees C

# publicationVenueFor[].label
Quantifying the effects of tempering on individual phase properties of DP980 steel with nanoindentation

# publicationVenueFor[].label
Grain refinement and recrystallization of heavily worked tantalum

# publicationVenueFor[].label
Minor titanium addition markedly improves the co-deformability of copper-tantalum composites

# publicationVenueFor[].label
The influence of stress during ion beam mixing

# publicationVenueFor[].label
Fabrication and characterization of aluminum - magnetic shape memory alloy composites

# publicationVenueFor[].label
Effect of twinning on the orientation dependence of mechanical behaviour and fracture in single crystals of the equiatomic CoCrFeMnNi high-entropy alloy at 77K

# publicationVenueFor[].label
Size dependence of energy storage and dissipation in a discrete dislocation plasticity analysis of static friction

# publicationVenueFor[].label
Discrete dislocation modelling of submicron indentation

# publicationVenueFor[].label
CRYSTALLIZATION AND STABILITY OF PSEUDO-BINARY AMORPHOUS TRANSITION-METAL SIMPLE METAL-ALLOYS

# publicationVenueFor[].label
Structural and microstructural influence on deformation and fracture of dual-phase steels

# publicationVenueFor[].label
Compositional and microstructural sensitivity of the actuation fatigue response in NiTiHf high temperature shape memory alloys

# publicationVenueFor[].label
Orientation dependence and tension/compression asymmetry of shape memory effect and superelasticity in ferromagnetic Co40Ni33Al27, Co49Ni21Ga30 and Ni54Fe19Ga27 single crystals

# publicationVenueFor[].label
Three dimensional forming of compressed open-cell metallic foams at elevated temperatures

# publicationVenueFor[].label
Severe plastic deformation of Ti74Nb26 shape memory alloys

# publicationVenueFor[].label
The thermal stability of nanocrystalline copper cryogenically milled with tungsten

# publicationVenueFor[].label
An experimental investigation of humidity and temperature effects on the mechanical properties of perfluorosulfonic acid membrane

# publicationVenueFor[].label
Discrete dislocation plasticity analysis of single slip tension

# publicationVenueFor[].label
EFFECTS OF REINFORCEMENT ORIENTATION ON THE TENSILE RESPONSE OF METAL-MATRIX COMPOSITES

# publicationVenueFor[].label
SUMMARY REPORT - COMPUTATIONAL ISSUES IN THE MECHANICAL-BEHAVIOR OF METALS AND INTERMETALLICS

# publicationVenueFor[].label
Discrete dislocation and continuum descriptions of plastic flow

# publicationVenueFor[].label
Fabrication and characterization of aluminum-magnetic shape memory alloy composites

# publicationVenueFor[].label
Si3N4/BN fibrous monoliths: Mechanical properties and tribological responses

# publicationVenueFor[].label
Compressive performance and crack propagation in Al alloy/Ti2AlC composites

# publicationVenueFor[].label
AN ANALYSIS OF RESIDUAL-STRESS FORMATION IN WHISKER-REINFORCED AL-SIC COMPOSITES

# publicationVenueFor[].label
X-RAY STUDY OF THE CRYSTALLIZATION PROCESSES IN AMORPHOUS (ZR0.64NI0.36)1-XALX ALLOYS

# publicationVenueFor[].label
Fracture in annealed and severely deformed tungsten

# publicationVenueFor[].label
Structural, thermodynamical, and transport properties of undercooled binary Pd-Ni alloys

# publicationVenueFor[].label
A micromechanics based model for predicting fatigue life of composite laminates

# publicationVenueFor[].label
Hardness and microstructure of tungsten heavy alloy subjected to severe plastic deformation and post-processing heat treatment

# publicationVenueFor[].label
Aluminum foam sandwich with density-graded open-cell core: Compressive and flexural response

# publicationVenueFor[].label
Measurement of mechanical properties by ultra-low load indentation

# publicationVenueFor[].label
Quasi-static and dynamic response of a Cu/Nb composite following equal channel angular extrusion

# publicationVenueFor[].label
Incorporating dynamic recrystallization into a crystal plasticity model for high-temperature deformation of Ti-6Al-4V

# publicationVenueFor[].label
Effect of strain rate on tensile behavior of polypropylene and carbon nanofiber filled polypropylene

# publicationVenueFor[].label
Effects of training on the thermomechanical behavior of NiTiHf and NiTiZr high temperature shape memory alloys

# publicationVenueFor[].label
Thermomechanical properties of poly(vinyl alcohol) plasticized with varying ratios of sorbitol

# publicationVenueFor[].label
Mechanical, microstructural and fracture properties of dissimilar welds produced by friction stir welding of AZ31B and Al6061

# publicationVenueFor[].label
ON MICROSTRUCTURAL EVOLUTION AND MICROMECHANICAL MODELING OF DEFORMATION OF A WHISKER-REINFORCED METAL MATRIX COMPOSITE

# publicationVenueFor[].label
Large scale atomistic simulations of screw dislocation structure, annihilation and cross-slip in FCC Ni

# publicationVenueFor[].label
Small-scale mechanical behavior of intermetallics and their composites

# publicationVenueFor[].label
Comparison of different experimental techniques for determination of elastic properties of solids

# publicationVenueFor[].label
Nitrogen impurity gettering in oxide dispersion ductilized chromium

# publicationVenueFor[].label
Influence of tantalum additions on the microstructure and shape memory response of Ti50.5Ni24.5Pd25 high-temperature shape memory alloy