# positions[].organizations[].parent[].label
Texas A&M Engineering Experiment Station (TEES)

# overview
My research focuses on Scalable Nanomanufacturing, Nanometer Scale Thermal and Mass Transport, Near Field Optics, Organic Optoelectronics, MEMS/NEMS Design and Fabrication.  Our lab develops new tools and techniques to pattern unconventional materials at the nanoscale, with particular interests in polymers, organic small molecules, metallic and semiconducting nanoparticles, and 1- and 2-D materials.

# keywords[]
0306 Physical Chemistry (incl. Structural)

# keywords[]
0306 Physical Chemistry (incl. Structural)

# keywords[]
0306 Physical Chemistry (incl. Structural)

# educationAndTraining[].organization.label
University of Illinois at Urbana Champaign - (Urbana, Illinois, United States)

# educationAndTraining[].organization.label
University of Illinois at Urbana Champaign - (Urbana, Illinois, United States)

# educationAndTraining[].organization.label
Georgia Institute of Technology - (Atlanta, Georgia, United States)

# publications[].label
Effect of Surface Temperature on Finger Friction and Perception in Electroadhesion

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
The role of mechanical force on the kinetics and dynamics of electrochemical redox reactions on graphene.

# publications[].label
Surface haptic rendering of virtual shapes through change in surface temperature.

# publications[].publisher
American Association for the Advancement of Science (AAAS)

# publications[].label
Measurement of nanoscale molten polymer droplet spreading using atomic force microscopy.

# publications[].publisher
SPIE, the international society for optics and photonics

# publications[].label
Mechanical design for tailoring the resonance harmonics of an atomic force microscope cantilever during tip-surface contact

# publications[].label
High-sensitivity nanometer-scale infrared spectroscopy using a contact mode microcantilever with an internal resonator paddle.

# publications[].label
Nanometer-scale flow of molten polyethylene from a heated atomic force microscope tip.

# publications[].label
Experimental quantification of impact force and energy for mechanical activation in vibratory ball mills

# publications[].label
Laser-induced nanoscale thermocapillary flow for purification of aligned arrays of single-walled carbon nanotubes.

# publications[].label
Nanometer-scale infrared spectroscopy of heterogeneous polymer nanostructures fabricated by tip-based nanofabrication.

# publications[].label
Temperature Dependence of Nanoscale Friction Investigated with Thermal AFM Probes

# publications[].label
A Review on Mechanics and Mechanical Properties of 2D Materials -  Graphene and Beyond

# publications[].label
Design and optimization of composite phase change material for cylindrical thermal energy storage

# publications[].label
Mechanistic model for quantifying the effect of impact force on mechanochemical reactivity.

# publications[].label
Making the mid-infrared nano with designer plasmonic materials

# publications[].publisher
SPIE, the international society for optics and photonics

# publications[].label
Atomic force microscope infrared spectroscopy on 15 nm scale polymer nanostructures.

# publications[].label
A Numerical Analysis of Conductive Heat Transfer in Cylindrical Thermal Energy Storage Composites

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Near-field infrared absorption of plasmonic semiconductor microparticles studied using atomic force microscope infrared spectroscopy

# publications[].label
Design of a heated micro-cantilever optimized for thermo-capillary driven printing of molten polymer nanostructures

# publications[].label
CANTILEVER DYNAMICS AND ENERGY LOCALIZATION DURING ATOMIC FORCE MICROSCOPE INFRARED SPECTROSCOPY

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Evaluation of the Electrowetting Effect on the Interfacial Mechanics between Human Corneocytes and Nanoasperities.

# publications[].label
A review on mechanics and mechanical properties of 2D materials-Graphene and beyond

# publications[].label
Design and Optimization of Lamellar Phase Change Composites for Thermal Energy Storage

# publications[].label
Improved atomic force microscope infrared spectroscopy for rapid nanometer-scale chemical identification.

# publications[].label
Conductive heat transfer in lamellar phase change material composites

# publications[].label
Objective oriented phase change material composite heat sink design

# publications[].label
Nanopatterning of GeTe phase change films via heated-probe lithography.

# publications[].label
Design of Radially Variant Phase-Change Material Composites

# publications[].label
Measuring atomic wear of graphene using local stress and heat

# publications[].label
Temperature-Dependent Dynamic Friction of a Single Human Corneocyte at Nanoscale Contact: An Analytical Approach and Direct Measurement Using Lateral Force Microscopy for Haptic Design Insight.

# publications[].label
Cyclic stability of lithium nitrate trihydrate in plate fin heat exchangers

# publications[].label
Local nanoscale heating modulates single-asperity friction.

# publications[].label
Temperature-dependence of ink transport during thermal dip-pen nanolithography

# publications[].label
Chemistry of friction, wear, and tribofilm growth on 2D materials

# publications[].label
Wear-resistant diamond nanoprobe tips with integrated silicon heater for tip-based nanomanufacturing.

# publications[].label
Evaluating Broader Impacts of Nanoscale Thermal Transport Research

# publications[].label
Temperature dependence of nanoscale friction investigated with thermal AFM probes

# publications[].label
ENHANCED NANOMETER-SCALE INFRARED SPECTROSCOPY WITH A CONTACT MODE MICROCANTILEVER HAVING AN INTERNAL RESONATOR PADDLE

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Controlling nanoscale friction through the competition between capillary adsorption and thermally activated sliding.

# publications[].label
Forward Selection Methodology for Phase Change Material Composite Optimization

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Humidity-Dependent Viscoelasticity of a Single Human Corneocyte at Nanoscale Contact Using AFM Force Spectroscopy for Haptic Design Considerations.

# publications[].label
HEATED ATOMIC FORCE MICROSCOPE CANTILEVERS AND THEIR APPLICATIONS

# publications[].label
Design for laser powder bed additive manufacturing of AlSi12 periodic mesoscale lattice structures

# publications[].label
Determination of the radii of coated and uncoated silicon AFM sharp tips using a height calibration standard grating and a nonlinear regression function.

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Next Generation of Heated Atomic Force Microscope Cantilever for Nanolithography: modelling, Simulation and Nanofabrication

# publications[].publisher
SPIE, the international society for optics and photonics

# publications[].label
Direct mechanochemical cleavage of functional groups from graphene.

# publications[].label
Using nanoscale thermocapillary flows to create arrays of purely semiconducting single-walled carbon nanotubes.

# publications[].label
Cooling Power and Thermal Buffering in Composite Heatsinks

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Method and device for quantitative control of force in mechanochemical reactions

# publications[].label
Mechanics of nanoscale crumpled graphene measured by Atomic Force Microscopy

# publications[].label
Ultrananocrystalline diamond tip integrated onto a heated atomic force microscope cantilever.

# publications[].label
Numerical evaluation of thermal energy storage rate in planar and cylindrical phase change material composites

# publications[].label
HEATED ATOMIC FORCE MICROSCOPE CANTILEVERS WITH WEAR-RESISTANT ULTRANANOCRYSTALLINE DIAMOND TIPS

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Fabrication of arbitrarily shaped silicon and silicon oxide nanostructures using tip-based nanofabrication

# publications[].label
Nanoscale IR spectroscopy of polymer systems using an atomic force microscope

# publications[].label
Driving Surface Chemistry at the Nanometer Scale Using Localized Heat and Stress.

# publications[].label
Nanometer scale alignment of block-copolymer domains by means of a scanning probe tip.

# publications[].label
Experimental Validation of Composite Phase Change Material Optimized for Thermal Energy Storage

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Effects of Temperature and Humidity on Energy Dissipation between Human Corneocytes and Nanoasperity Sliding Contacts.

# researcherOn[].label
CAREER: Development of 2d Materials with High Optical Sensitivity and Efficient Charge Transport Through Local Chemical Modification

# researcherOn[].awardedBy.label
National Science Foundation - (Arlington, Virginia, United States)

# researcherOn[].label
Heat Transfer and Storage in Architectured Composite Heatsinks

# researcherOn[].awardedBy.label
United States Department of the Navy - (Arlington, Virginia, United States)

# streetAddress
Texas A&M University; Mechanical Engineering; 3123 TAMU

# organizations[]
Texas A&M Engineering Experiment Station (TEES)

# schools[]
Texas A&M Engineering Experiment Station (TEES)

# inTheNews[].label
National Science Foundation Awards Chemistry Department $1.8 Million Grants

# inTheNews[].label
Shamberger To Lead Investigation On Novel Heat-Storage Materials