# overview
Dr. Marwan Khraisheh's teaching and research interests include sustainable and smart manufacturing, materials for energy applications, materials processing, integration of mechanics and materials in manufacturing.

# keywords[]
High Temperature Uniaxial Tensile Testing

# keywords[]
9 Industry, Innovation And Infrastructure

# keywords[]
12 Responsible Consumption And Production

# keywords[]
3403 Macromolecular And Materials Chemistry

# keywords[]
12 Responsible Consumption And Production

# keywords[]
Mold-casting Interface Heat Transfer Coefficient

# keywords[]
12 Responsible Consumption And Production

# educationAndTraining[].organization.label
Washington State University - (Pullman, Washington, United States)

# educationAndTraining[].organization.label
Washington State University - (Pullman, Washington, United States)

# awardsAndHonors[].label
Outstanding Young Manufacturing Engineer Award

# awardsAndHonors[].label
Faculty Early Career Development (CAREER) Program

# awardsAndHonors[].label
Henry Mason Lutes Award for Excellence in Engineering Education

# publications[].label
A Review on the Modeling of the Elastic Modulus and Yield Stress of Polymers and Polymer Nanocomposites: Effect of Temperature, Loading Rate and Porosity.

# publications[].label
Predicting Mixed Mode Crack Initiation Angles in Anisotropic Materials Using the Shape of the Crack Tip Core Region

# publications[].label
TIME-SERIES BASED ANALYSIS FOR PRIMARY CHATTER IN METAL-CUTTING

# publications[].label
Fabrication and antifouling behaviour of a carbon nanotube membrane

# publications[].label
Inorganic Membranes: Preparation and Application for Water Treatment and Desalination.

# publications[].label
THE EFFECT OF FRICTION STIR PROCESSING ON MICROSTRUCTURE AND TENSILE BEHAVIOR OF THIXOMOLDED AZ91 MAGNESIUM ALLOY

# publications[].label
Optimum forming loading paths for Pb-Sn superplastic sheet materials

# publications[].label
Mechanical characteristics of superplastic deformation of AZ31 magnesium alloy

# publications[].label
Towards the Development of Novel Hybrid Composite Steel Pipes: Electrochemical Evaluation of Fiber-Reinforced Polymer Layered Steel against Corrosion.

# publications[].label
FLOW STRENGTH AND SIZE EFFECT OF AN AL-SI-MG COMPOSITE MODEL SYSTEM UNDER MULTIAXIAL LOADINGS

# publications[].label
Can carbon-based nanomaterials revolutionize membrane fabrication for water treatment and desalination?

# publications[].label
Toward designing and controlling the microstructure and properties of aluminum alloy castings using mold vibration

# publications[].label
A hybrid simulation approach for predicting energy flows in production lines

# publications[].label
On the forces generated during friction stir processing of aluminum 5052 sheets

# publications[].label
Finite element modeling of superplastic forming in the presence of back pressure

# publications[].label
Chapter 13 Mechanical Characterization of Membranes

# publications[].label
Constitutive modeling of superplastic deformation .1. Theory and experiments

# publications[].label
Post-superplastic forming analysis under different loading paths. Part one: Uniaxial loading case

# publications[].label
Modeling of anisotropic deformation in superplastic sheet metal stretching

# publications[].label
Superplastic Forming Response of a Friction Stir Processed Mg Alloy Sheet - A Numerical Approach

# publications[].label
Novel anti-microbial membrane for desalination pretreatment: A silver nanoparticle-doped carbon nanotube membrane

# publications[].label
Simulation of Friction Stir Processing with internally cooled tool

# publications[].label
On the failure characteristics of superplastic sheet materials subjected to gas pressure forming

# publications[].label
Friction stir processing of commercial AZ31 magnesium alloy

# publications[].label
Limiting strains of sheet metals obtained by pneumatic stretching at elevated temperatures

# publications[].label
Correlation between the microstructure and forces generated during friction stir processing of AA5052

# publications[].label
Integrated approach to optimization of superplastic forming

# publications[].label
A numerical investigation of the solidification of Al-12.6%Si alloy during mold-vibration

# publications[].label
New Insights into the Mechanical Behavior of Thin-Film Composite Polymeric Membranes.

# publications[].label
Defects quantification of additively manufactured AISI 316L stainless steel parts via non-destructive analyses: Experiments and semi-FEM-analytical-based modeling

# publications[].label
OBSERVATION OF TRANSIENT EFFECTS IN SUPERPLASTIC DEFORMATION OF PB-SN EUTECTIC ALLOY

# publications[].label
Simulation of High-Temperature AA5083 Bulge Forming with a Hardening/Softening Material Model

# publications[].label
An investigation of yield potentials in superplastic deformation

# publications[].label
The anisotropic R-criterion for crack initiation

# publications[].label
MODELING OF FRICTION STIR PROCESSING USING 3D CFD ANALYSIS

# publications[].label
A new smoothed particle hydrodynamics non-Newtonian model for friction stir welding: Process modeling and simulation of microstructure evolution in a magnesium alloy

# publications[].label
Experimental thermal analysis of friction stir processing

# publications[].label
Functional graphene nanosheets: The next generation membranes for water desalination

# publications[].label
On the stability of superplastic deformation using nonlinear wavelength analysis

# publications[].label
Integrated 3D model to simulate solidification and predict hot cracking during DC casting of aluminum alloys

# publications[].label
Enhancement of osteoblast gene expression by mechanically compatible porous Si-rich nanocomposite.

# publications[].label
Multiscale - Based optimization of superplastic forming

# publications[].label
Remanufacturing and reuse of thin film composite (TFC) membranes through surface modification using bio-inspired eco-friendly coating

# publications[].label
Printability for additive manufacturing with machine learning: Hybrid intelligent Gaussian process surrogate-based neural network model for Co-Cr alloy.

# publications[].label
Microstructure Refinement and Void Evolution via Friction Stir Processing of AA 5052

# publications[].label
The Effect of Friction Stir Processing on Microstructure and Tensile Behavior of Thixomolded AZ91 Magnesium Alloy

# publications[].label
On the laser additive manufacturing of high-entropy alloys: A critical assessment of in-situ monitoring techniques and their suitability

# publications[].label
Optimization of Superplastic Forming; Effects of Interfacial Friction on Variable Strain Rate Forming Paths

# publications[].label
Facile Synthesis of Copper Oxide Nanoparticles via Electrospinning

# publications[].label
Analysis of superplastic deformation of AZ31 magnesium alloy

# publications[].label
Silicon morphology modification in the eutectic Al-Si alloy using mechanical mold vibration

# publications[].label
External Corrosion Behavior of Steel/GFRP Composite Pipes in Harsh Conditions.

# publications[].label
Constitutive modeling of deformation-induced anisotropy in superplastic materials

# publications[].label
Predictive Modeling for Rooftop Solar Energy Throughput: A Machine Learning-Based Optimization for Building Energy Demand Scheduling

# publications[].label
On the high temperature testing of superplastic materials

# publications[].label
Microstructure - Based modeling of anisotropic superplastic deformation

# publications[].label
On the Development of Smart Framework for Printability Maps in Additive Manufacturing of AISI 316L Stainless Steel

# publications[].label
Recent Progress in the Growth and Applications of Graphene as a Smart Material: A Review

# publications[].label
Superplastic flow under transient conditions and multiaxial stresses

# publications[].label
Effects of Interfacial Friction Distribution on the Superplastic Forming of AA5083

# publications[].label
Combined mechanics-materials based optimization of superplastic forming of magnesium AZ31 alloy

# publications[].label
Cruciform-Shaped Specimens for Elevated Temperature Biaxial Testing of Lightweight Materials

# publications[].label
Analytical modeling of strain rate distribution during friction stir processing

# publications[].label
Innovative Bipolar Plates Design for Increasing Fuel Cell Efficiency

# publications[].label
Effect of state of stress on the cavitation behavior of Al 5083 superplastic material

# publications[].label
Testing and modelling of material behaviour and formability in sheet metal forming

# publications[].label
An integrated approach to the Superplastic Forming of lightweight alloys: towards sustainable manufacturing

# publications[].tags
9 Industry, Innovation and Infrastructure

# publications[].label
Investigation of post-superplaistic forming properties of AZ31 magnesium alloy

# publications[].label
Gas Pressure Profile Prediction from Variable Strain Rate Deformation Paths in AA5083 Bulge Forming

# publications[].label
Additive manufacturing of polyethylene-based composites sourced from industrial waste

# publications[].label
Effects of microstructural evolution on the stability of superplastic deformation

# publications[].label
An experimental study on the stability of superplastic deformation of AZ31 mg alloy

# publications[].label
Mechanical Behavior of a Novel Nanocomposite Polysulphone  Carbon Nanotubes Membrane for Water Treatment

# publications[].publisher
Hamad bin Khalifa University Press (HBKU Press)

# publications[].label
Superplastic forming of AZ31 magnesium alloy with controlled microstructure

# publications[].label
Engineering the Surface and Mechanical Properties of Water Desalination Membranes Using Ultralong Carbon Nanotubes.

# publications[].label
Impact of selective grain refinement on superplastic deformation: Finite element analysis

# publications[].label
Method and apparatus for characterizing microscale formability of thin sheet materials

# publications[].label
On the Effect of Temperature on the Tensile Behaviour of Open-cell Aluminium Alloy Foams

# publications[].label
Theoretical and computational modeling of thermal properties of lightweight concrete

# publications[].label
The effects of stress state and cavitation on deformation stability during superplastic forming

# publications[].label
A new criterion for mixed mode fracture initiation based on the crack tip plastic core region

# publications[].label
ANISOTROPY AND TRANSIENT EFFECTS IN SUPERPLASTIC DEFORMATION

# publications[].label
Microcharacterization and texture analysis of friction stir processed AA 5052 alloy

# publications[].label
Benzene Removal by Iron Oxide Nanoparticles Decorated Carbon Nanotubes

# publications[].label
Towards sustainable management of end-of-life membranes: Novel transformation of end of life (EoL) reverse osmosis membranes for efficient dye/salt separation

# publications[].label
Characterization of surface properties of thin film composite (TFC) membranes under various loading conditions

# publications[].label
On the development of part-scale FEM modeling for laser powder bed fusion of AISI 316L stainless steel with experimental verification

# publications[].label
Modeling the Effects of Coolant Application in Friction Stir Processing on Material Microstructure Using 3D CFD Analysis

# publications[].label
Editorial: Advanced healthcare biomaterials for surface functionalization and controlled drug delivery.

# publications[].label
Experimental investigation of heat exchanger tubesheet hole enlargement

# publications[].label
Maximum stress triaxiality ratio criterion for mixed mode crack initiation in anisotropic materials

# publications[].label
Thermo-mechanical and metallurgical aspects in friction stir processing of AZ31 Mg alloy-A numerical and experimental investigation

# publications[].label
Three dimensional forming of compressed open-cell metallic foams at elevated temperatures

# publications[].label
EXPERIMENTAL-OBSERVATIONS OF INDUCED ANISOTROPY DURING THE TORSION OF SUPERPLASTIC PB-SN EUTECTIC ALLOY

# publications[].label
On the gas pressure forming of aluminium foam sandwich panels: Experiments and numerical simulations

# publications[].label
The effect of strain rate sensitivity evolution on deformation stability during superplastic forming

# publications[].label
Multi-scale analysis of failure during superplastic deformation

# publications[].label
Modelling of Friction Stir Processing with in Process Cooling Using Computational Fluid Dynamics Analysis

# publications[].label
Finite element modeling and optimization of superplastic forming using variable strain rate approach

# publications[].label
Constitutive Modeling of Multiaxial Deformation and Induced Anisotropy in Superplastic Materials

# publications[].label
Effect of mold vibration on the solidification process during gravity die casting of AA 356

# publications[].label
New approach to gas pressure profile prediction for high temperature AA5083 sheet forming

# publications[].label
Simulation of Material Flow and Heat Evolution in Friction Stir Processing Incorporating Melting

# publications[].label
Multi-Scale Analysis of Deformation and Failure of Superplastic Materials

# publications[].label
Effect of straining graphene on nanopore creation using Si cluster bombardment: A reactive atomistic investigation

# publications[].label
Characterization of a novel bioactive composite using advanced X-ray computed tomography

# publications[].label
A new combined experimental-numerical approach to evaluate formability of rate dependent materials

# publications[].label
Analysis of mixed mode crack initiation angles under various loading conditions

# publications[].label
Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy With Near Ultra-Fine Grained Structure

# publications[].label
Evolution of surface damage of thin film composite (TFC) reverse osmosis (RO) membranes under controlled hygro-mechanical conditions

# publications[].label
Superplastic deformation of magnesium alloy AZ31 under biaxial loading condition

# publications[].label
Reducing flux decline and fouling of direct contact membrane distillation by utilizing thermal brine from MSF desalination plant

# publications[].label
Mechanical properties of water desalination and wastewater treatment membranes

# publications[].label
Additive manufacturing of Inconel-625: from powder production to bulk samples printing

# publications[].label
Simulation of Friction Stir Processing with Internally Cooled Tool

# researcherOn[].label
Additive Manufacturing of Concrete for Sustainable Construction using Locally Developed Materials

# researcherOn[].awardedBy.label
Qatar National Research Fund - (Doha, Qatar)

# inTheNews[].label
Researchers at Tamuq addressing Covid-19 challenges in Qatar

# inTheNews[].label
Tamuq engineers transform snorkelling masks into ventilators

# inTheNews[].label
Engineers from Texas A&M University transform snorkelling masks to ventilators