# positions[].organizations[].parent[].label
Texas A&M Engineering Experiment Station (TEES)

# keywords[]
4007 Control Engineering, Mechatronics And Robotics

# keywords[]
Scanning Probe Alloying Nanolithography (span)

# educationAndTraining[].organization.label
National Institute of Standards and Technology - (Gaithersburg, Maryland, United States)

# educationAndTraining[].organization.label
Stevens Institute of Technology - (Hoboken, New Jersey, United States)

# educationAndTraining[].organization.label
Stevens Institute of Technology - (Hoboken, New Jersey, United States)

# awardsAndHonors[].label
Faculty Early Career Development (CAREER) Program

# awardsAndHonors[].label
Faculty Early Career Development (CAREER) Program

# publications[].label
Effects of Environmental Factors on Dust Particle Adhesion on Glass Substrates

# publications[].publisher
Hamad bin Khalifa University Press (HBKU Press)

# publications[].label
Microwave Synthesis of MnO2-Lignin Composite Electrodes for Supercapacitors

# publications[].label
Low-temperature boriding of high-carbon steel

# publications[].label
Effects of humidity on dust particle removal during solar panel cleaning

# publications[].label
Corrosive behavior of multi-phased quasicrystal alloys

# publications[].label
Effects of Surface Texturing on Cell Adhesion for Artificial Joints

# publications[].label
Atomic Force Microscopic Study of Piezoelectric Polymers

# publications[].label
Wettability and spontaneous penetration of a water drop into hydrophobic pores.

# publications[].label
Tribo-electrical evaluation of conductive fluid film of Ti 3 C 2 T z MXene-containing lubricant

# publications[].label
Boron-Based Nanoparticles for Chemical-Mechanical Polishing of Copper Films

# publications[].label
Roles of polymer brushes in biological applications

# publications[].label
Annealing Ti3C2Tz MXenes to Control Surface Chemistry and Friction.

# publications[].label
Additively manufactured electrodes for supercapacitors: A review

# publications[].label
LithiumIon Batteries: 3D Current Collectors for LithiumIon Batteries: A Topical Review (Small Methods 8/2018)

# publications[].label
Methods to probe the formation of biofilms: applications in foods and related surfaces

# publications[].label
Optimization of the corrosion performance of Ni-SiC coatings through flash heating

# publications[].label
Processing and Properties of Nanostructured Alloy Coatings in the Binary Ni-Cr System

# publications[].label
Boric Acid as an Additive for Core-Drilling of Alumina

# publications[].label
Observation of yttrium oxide nanoparticles in cabbage (Brassica oleracea) through dual energy K-edge subtraction imaging.

# publications[].label
Rethinking the pathway to sustainable fire retardants.

# publications[].label
Bio-Environment-Induced Degradation and Failure of Internal Fixation Implants.

# publications[].label
Using nanoparticles to prevent enamel wear

# publications[].label
Materials and Their Failure Mechanisms in Total Disc Replacement

# publications[].label
Frictional properties of molecular thin films

# publications[].label
Tribocorrosion Influenced Pitting of a Duplex Stainless Steel

# publications[].label
Assessment of Toxicity of Nanoparticles Using Insects as Biological Models.

# publications[].label
Temperature-dependent rheological behavior of nanofluids rich in carbon-based nanoparticles

# publications[].label
Surface Stress Evolution in Through Silicon Via Wafer During a Backside Thinning Process

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Tribochemistry as an Alternative Synthesis Pathway

# publications[].label
Observations of the topography and friction properties of macromolecular thin films at the nanometer scale

# publications[].label
Nano-Scale Characterization of a Piezoelectric Polymer (Polyvinylidene Difluoride, PVDF).

# publications[].label
A Review on Corrosion and Wear of Additively Manufactured Alloys

# publications[].label
Friction pair evaluation of cartilage-diamond for partial joint repair

# publications[].label
Spatial evolution of friction of a textured wafer surface

# publications[].label
Electric-potential-induced uniformity in graphene oxide deposition on porous alumina substrates

# publications[].label
Applications of quantum dots with upconverting luminescence in bioimaging.

# publications[].label
Corrosion of nickel-based alloys fabricated through additive manufacturing: a review

# publications[].label
Nanostructured photocatalytic coatings for corrosion protection and surface repair

# publications[].label
Morphology-influenced wetting model of nanopore structures

# publications[].label
Bio-mimetic study of novel materials for joint replacements

# publications[].label
Using electrochemical impendence to characterize thermal performance of working lubricants

# publications[].label
Morphology and electric potential-induced mechanical behavior of metallic porous nanostructures

# publications[].label
Shape-selective catalysis and surface enhanced Raman scattering studies using Ag nanocubes, nanospheres and aggregated anisotropic nanostructures.

# publications[].label
Interfacial transfer between copper and polyurethane in chemical-mechanical polishing

# publications[].label
Corrosive Behavior of 3D-Printed 316L Stainless Steel

# publications[].label
Tribological Characteristics of Insects’ Skin

# publications[].label
BAYESIAN OBJECT CLASSIFICATION OF GOLD NANOPARTICLES

# publications[].label
Electrical-potential induced surface wettability of porous metallic nanostructures

# publications[].label
NiWO4 nanoparticle decorated lignin as electrodes for asymmetric flexible supercapacitors

# publications[].label
Acquisition of a Combined Mechano-Electro-Chemical Characterization Equipment for Advanced Nanocomposites Research and Education

# publications[].label
Influence of Packing Density on Electrochemical Performance of Lignin

# publications[].label
Modeling and simulation of plasma enhanced processing for integrated circuit fabrication

# publications[].label
TRIBOLOGICAL EVALUATION OF A HIGH-PERFORMANCE COMPOSITE COATING

# publications[].label
Roles of molecular structure of carbon-based materials in energy storage

# publications[].label
Active control of surface forces via nanopore structures

# publications[].label
Impacts of Structure-Directing Agents on the Synthesis of Cu3Mo2O9 for Flexible Lignin-Based Supercapacitor Electrodes

# publications[].label
Microstructure and Wear Behavior of Tungsten Hot-Work Steel after Boriding and Boroaluminizing

# publications[].label
Influence of oxides on friction during Cu CMP

# publications[].label
Y2O3 nanosheets as slurry abrasives for chemical-mechanical planarization of copper

# publications[].label
MICROWAVE SYNTHESIS OF PLANT-BASED SUPERCAPACITOR ELECTRODES FOR FLEXIBLE ELECTRONICS

# publications[].label
Locomotion control of hybrid cockroach robots.

# publications[].label
Morphology dependent catalysis and surface enhanced Raman scattering (SERS) studies using Pd nanostructures in DNA, CTAB and PVA scaffolds.

# publications[].label
Lignocellulose materials for supercapacitor and battery electrodes: A review

# publications[].label
Nanofluidic Behavior at the Fluid-Solid Interface

# publications[].label
A review of current understanding in tribochemical reactions involving lubricant additives

# publications[].label
Data-Driven Predictive Electrochemical Behavior of Lignin-Based Supercapacitors via Machine Learning

# publications[].label
Correction to "Microwave Synthesis of Electrically Conductive Gold Nanowires on DNA Scaffolds".

# publications[].label
Design of quasicrystal alloys with favorable tribological performance in view of microstructure and mechanical properties

# publications[].label
Drag-reduction of 3D printed shark-skin-like surfaces

# publications[].label
Design and Synthesis of Lignin-Based Flexible Supercapacitors (vol 8, pg 498, 2020)

# publications[].label
Wear Behavior of Niobium Boride Coatings

# publications[].label
Dispersion of Nanoparticles in Lubricating Oil: A Critical Review

# publications[].label
HYDRAULIC CAVITATION FROM A SONOMATERIALS SCIENCE PERSPECTIVE: A REVIEW

# publications[].label
Electrochemical Characterization of a Nickel-Phosphorus Coating on Diamond Grits

# publications[].label
Tribofilm Formation using Ti2AIC Material

# publications[].label
High-Performance Ni-SiC Coatings Fabricated by Flash Heating

# publications[].label
Tribological Evaluation of Electrical Resistance of Lubricated Contacts

# publications[].label
Design of Anti-frictional Ceramic-Based Composite Coatings

# publications[].label
Synthesis and Morphological Characterization of Electroless-Deposited Ni-P Coatings on Diamond Abrasives

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
A theoretical model to determine the capacity performance of shape-specific electrodes

# publications[].label
Machine learning-assisted materials development and device management in batteries and supercapacitors: performance comparison and challenges

# publications[].label
Acquisition of a Combined Mechano-Electro-Chemical Characterization Equipment for Advanced Nanocomposites Research and Education

# publications[].label
Influence of morphology on electrochemical and capacity performance of open-porous structured electrodes

# publications[].label
Design and synthesis of high performance flexible and green supercapacitors made of manganese-dioxide-decorated alkali lignin

# publications[].label
Amphiphilic Zirconium Phosphate Nanoparticles as Tribo-Catalytic Additives of Multi-Performance Lubricants

# publications[].label
Performance Characteristics of Lubricants in Electric and Hybrid Vehicles: A Review of Current and Future Needs

# publications[].label
Design and Synthesis of Lignin-Based Flexible Supercapacitors

# publications[].label
3D Current Collectors for Lithium-Ion Batteries: A Topical Review

# publications[].label
Tomography of 3D-Printed Lattice Structured Aluminum-Silicon Alloy and Its Deformation.

# publications[].label
Effects of surface morphological parameters on cleaning efficiency of PV panels

# publications[].label
A PVDF-based deformation and motion sensor: Modeling and experiments

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Tribological evaluation of porcine skin.

# publications[].label
Bayesian object classification of gold nanoparticles

# publications[].label
DESIGN AND SYNTHESIS OF A HIGH PERFORMANCE COATING

# publications[].label
Erratum to: Observation of yttrium oxide nanoparticles in cabbage (Brassica oleracea) through dual energy K-edge subtraction imaging.

# publications[].label
Effect of Grain Boundary Impurities on the Mechanical and Tribological Properties of Zirconia Surfaces

# researcherOn[].label
Binder Jet Additive Manufacturing with Granulated Ceramic Powders

# researcherOn[].awardedBy.label
Directorate for Engineering - (Arlington, Virginia, United States)

# researcherOn[].awardedBy.label
National Institute of Standards and Technology - (Gaithersburg, Maryland, United States)

# researcherOn[].awardedBy.preferredLabel
DOC-National Institute of Standards and Technology

# researcherOn[].label
Full Scale, High Temperature and High Pressure Industry Test-bed for Increased Horizontal and Vertical Drilling Efficiency and Reliability

# streetAddress
Texas A&M University; Mechanical Engineering; 3123 TAMU

# schools[]
Texas A&M Engineering Experiment Station (TEES)

# inTheNews[].label
Lightweight green supercapacitors could charge devices in a jiffy

# inTheNews[].label
Lightweight Green Supercapacitors Could Quickly Charge Devices

# etdChairOf[].label
Nudo, Nicholas (2011-05). Mechanical Evaluation of Electronic Properties of Materials. Master's Thesis.

# etdChairOf[].label
Zhou, Yan (2014-04). Characterization of Carbon-Based Biomaterials. Doctoral Dissertation.

# etdChairOf[].label
Paluri, Rajeshwari S. Lakshmi (2011-08). Development and Characterization of Novel Alumina Based Ceramic Matrix Composites for Energy Efficient Sliding Applications. Master's Thesis.

# etdChairOf[].label
Patel, Sagar Devraj (2016-05). Grain Orientation Texture Control and Its Effects on the Hardness and Abrasion Resistance of Sintered Carbides. Master's Thesis.

# etdChairOf[].label
Reeks, John Mason (2016-05). Design and Synthesis of a Novel Nacreous-Enhanced Composite for Improved Fixation of Lumbar Total Disc Replacement. Master's Thesis.