# overview
Complex networks applicable to swarm and drone control; Ultrafast physics applicable to advanced manufacturing; Nonlinear time-frequency control; Characterization and control of dynamic manufacturing instability; Innovation and engineering design theory; Nonlinear stress wave propagation; Laser ultrasonic thermometry.

# keywords[]
4009 Electronics, Sensors And Digital Hardware

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4009 Electronics, Sensors And Digital Hardware

# keywords[]
4007 Control Engineering, Mechatronics And Robotics

# publications[].label
Interpretation of crack-induced rotor non-linear response using instantaneous frequency

# publications[].label
CONTROLLING BIFURCATION AND DYNAMIC BEHAVIOR IN VIBRO-IMPACT SYSTEM

# publications[].label
Laser-optic evaluation for bond quality of polymeric medical tubing

# publications[].label
Study of Wave Motion on Tubulars Using Broad-band Laser Ultrasound

# publications[].label
Control of Cutting Vibration and Machining Instability

# publications[].label
Dynamics of a circular cylinder with an attached splitter plate in laminar flow: A transition from vortex-induced vibration to galloping

# publications[].label
Synchronization of Chaos in Simultaneous Time-Frequency Domain

# publications[].label
HIGH SPEED NON-LINEAR MICRO-MILLING DYNAMICS

# publications[].label
A parameter study of the eccentricity frequency and amplitude, and chip length effects on a machine tool with multiple boundaries

# publications[].label
Analytical Prediction of Interrupted Cutting Periodic Motions in a Machine Tool

# publications[].label
On failure mechanisms in flip chip assembly - Part 1: Short-time scale wave motion

# publications[].label
Wavelet-based laser-induced ultrasonic inspection in pipes

# publications[].publisher
SPIE, the international society for optics and photonics

# publications[].label
Fatigue life prediction of engaging spur gears using power density

# publications[].label
IMPACT OF SPINDLE SPEED ON MICRO-MILLING STABILITY

# publications[].label
On the characteristics of bifurcation and nonlinear dynamic response

# publications[].label
On the dynamic short-time scale wave propagation and the characterization of optimal packaging material for highperformance electronic packages

# publications[].label
Time-Frequency Control of Milling Instability and Chatter at High Speed

# publications[].label
Cutting Dynamics and Machining Instability

# publications[].label
Generalized thermo-elastodynamics for semiconductor material subject to ultrafast laser heating. Part II: Near-field response and damage evaluation

# publications[].label
Lessons Learned from Field and Laboratory Testing of a DBR Project

# publications[].publisher
American Society of Civil Engineers (ASCE)

# publications[].label
ON CONTROLLING NON-AUTONOMOUS TIME-DELAY FEEDBACK SYSTEMS

# publications[].label
Recovering tractor stability from an intensive rollover with a momentum flywheel and active steering: System formulation and scale-model verification

# publications[].label
Machine Tool Vibrations and Cutting Dynamics Introduction

# publications[].label
Laser Induced Stress Wave Thermometry for In-situ Temperature and Thickness Characterization of Single Crystalline Silicon Wafer: Part I-Theory and Apparatus

# publications[].label
ON THE TEMPORAL NETWORK ANALYSIS WITH LINK PREDICTION

# publications[].label
GUIDED WAVE PROPAGATION IN TUBULAR SECTION WITH MULTI-LAYERED VISCOELASTIC COATING PART II- CIRCUMFERENTIAL WAVES

# publications[].label
Ultrashort pulse-induced elastodynamics in polycrystalline materials. Part I: Model validation

# publications[].label
ON THE PROPER DESCRIPTION OF COMPLEX NETWORK DYNAMICS

# publications[].label
A PROPOSITION FOR DESCRIBING REAL-WORLD NETWORK DYNAMICS

# publications[].label
ELASTO-VISCOPLASTIC RESPONSE OF SILICON TO FEMTOSECOND LASER HEATING AT ELEVATED TEMPERATURE

# publications[].label
Mechanical Fault Diagnosis Using Numerical Hilbert Analysis

# publications[].label
On the nonlinear features of time-delayed feedback oscillators

# publications[].label
Thermoelastic modeling of laser-induced stress waves in plates

# publications[].label
A case of mitigating non-autonomous time-delayed system with cubic order feedback

# publications[].label
CONTROL OF HIGH SPEED MILLING CHATTER IN SIMULTANEOUS TIME-FREQUENCY DOMAIN

# publications[].label
Thermo-elasto-plasto-dynamics of ultrafast optical ablation in polycrystalline metals. Part II: Response and damage evaluation

# publications[].label
Impact of Coupling Strength On Reaching Network Consensus

# publications[].label
Laser-induced stress wave thermometry applied to silicon wafer processing: Modeling and experimentation

# publications[].label
Machining dynamics involving whirling Part II: Machining motions described by nonlinear and linearized models

# publications[].label
Superaccelerated pavement testing on full-scale concrete slabs

# publications[].label
Laser Induced Stress Wave Thermometry for In-Situ Temperature and Thickness Characterization of Single Crystalline Silicon Wafer Part II - Experimental Results

# publications[].label
On the Dispersion and Attenuation of Guided Waves in Tubular Section with Multi-Layered Viscoelastic Coating - Part I: Axial Wave Propagation

# publications[].label
MATLAB (R) Programming Examples of Nonlinear Time-Frequency Control

# publications[].label
Integration of Extenics and Axiomatic Design theory

# publications[].label
Optimal design solutions for crew exploration vehicle

# publications[].label
Non-Contact Laser Ultrasonic Inspection for Cryogenically Introduced Interlayer Defects in Epoxy-Based Composites

# publications[].label
Thermal-acousto-photonics for non-contact temperature measurement in silicon wafer processing

# publications[].publisher
SPIE, the international society for optics and photonics

# publications[].label
Characteristics and Effects on a Machine-Tool Due to Grazing Motions of a Friction Boundary

# publications[].label
MITIGATION OF MILLING CHATTER AT HIGH SPEED

# publications[].label
Fatigue-life prediction of full-scale concrete pavement overlay over flexible pavement: Super-accelerated pavement testing application

# publications[].label
Non-linear characteristics of a cracked rotor-journal bearing system

# publications[].label
Sliding Motions on a Periodically Time-varying Boundary for a Friction-induced Oscillator

# publications[].label
WAVELET-BASED FILTERED-X LMS ALGORITHM FOR THE CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTORS

# publications[].label
Machining dynamics involving whirling Part I: Model development and validation

# publications[].label
CONCURRENT SPEED AND POSITION TRACKING OF PM BRUSHED DC MOTORS

# publications[].label
Synchronization of chaos in simultaneous time-frequency domain

# publications[].label
Ultrasonic time-frequency characterization of silicon wafers at elevated temperatures

# publications[].label
Wavelet-based technique for detection of mechanical chaos

# publications[].publisher
SPIE, the international society for optics and photonics

# publications[].label
A 3D turning model for the interpretation of machining stability and chatter

# publications[].label
Mitigating Grazing Bifurcation and Vibro-Impact Instability in Time-Frequency Domain

# publications[].label
Effects of Chip Seizure on Steady State Motion of a Machine-Tool

# publications[].label
On the Causes of Rolling Instability and Chatter

# publications[].label
Temporal and Spectral Characteristics of Dynamic Instability

# publications[].label
Simultaneous time-frequency control of bifurcation and chaos

# publications[].label
Vortex-induced vibration of a flexible splitter plate attached to a square cylinder in laminar flow

# publications[].label
Generalized thermo-elastodynamics for semiconductor material subject to ultrafast laser heating. Part I: Model description and validation

# publications[].label
Analytical feasibility of laser induced stress wave thermometry applied to silicon wafers

# publications[].label
Nonlinear time-frequency control of PM synchronous motor instability applicable to electric vehicle application

# publications[].label
Analytical Prediction of Periodic Motions in a Machine Tool With Loss of Effective Chip Contact

# publications[].label
Ultrafast Laser-Induced Elastodynamics in Single Crystalline Silicon Part I: Model Formulation

# publications[].label
ELASTO-VISCOPLASTIC WAVE THERMOMETRY FOR SINGLE CRYSTALLINE SILICON PROCESSING

# publications[].label
SIMULTANEOUS TIME-FREQUENCY CONTROL OF ACTIVE MAGNETIC BEARING

# publications[].label
Ultrashort pulse induced elastodynamics in polycrystalline materials. Part II: Thermal-mechanical response

# publications[].label
ON THE EFFICACY OF INFORMATION TRANSFER IN COMPLEX NETWORKS

# publications[].label
Characterization of bond quality for polymeric medical tubing

# publications[].label
Sensitivity of Steady State Intermittent Cutting Motion to Work-Piece Characteristics

# publications[].label
On the design and physical validation of a time-frequency controller

# publications[].label
On nonlinear cutting response and tool chatter in turning operation

# publications[].label
TURNING DYNAMICS PART 2: STABILITY AT HIGH SPEED

# publications[].label
Generalized Thermo-Elastodynamics for Polycrystalline Metallic Thin Films in Response to Ultrafast Laser Heating

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Impact of Tool Geometry on Cutting Dynamics

# publications[].label
Periodic Motions of the Machine Tools in Cutting Process

# publications[].label
Ultrafast Laser-Induced Elastodynamics in Single Crystalline Silicon Part II: Near-Field Response

# publications[].label
GUIDED WAVE PROPAGATION IN TUBULAR SECTION WITH MULTI-LAYERED VISCOELASTIC COATING PART I - AXIAL WAVES

# publications[].label
Time-Frequency Control of Friction Induced Instability

# publications[].label
On failure mechanisms in flip chip assembly - Part 2: Optimal underfill and interconnecting materials

# publications[].label
THE OPTIMIZATION OF TIME-FREQUENCY CONTROL - USING NON-AUTONOMOUS TIME-DELAY FEEDBACK SYSTEMS AS EXAMPLE

# publications[].label
Extenics enhanced axiomatic design procedure for AI applications

# publications[].label
TURNING DYNAMICS PART 1: EXPERIMENTAL ANALYSIS

# publications[].label
IMPACT OF COUPLED WHIRLING AND TOOL GEOMETRY ON MACHINING DYNAMICS

# publications[].label
The Stick Motion of a Harmonically Excited, Friction-Induced Oscillator on a Sinusoidally Traveling Surface

# publications[].label
Characterization of Dynamical Instability Using Instantaneous Frequency

# publications[].label
Grazing bifurcations of a harmonically excited oscillator moving on a time-varying translation belt

# publications[].label
On Controlling Milling Instability and Chatter at High Speed

# publications[].label
EFFECTS OF SPINDLE SPEED ON TURNING STABILITY

# publications[].label
ACTIVE MAGNETIC BEARINGS FOR HIGH SPEED SPINDLE DESIGN WITH NONLINEAR TIME-FREQUENCY CONTROL

# publications[].label
On fault induced nonlinear rotary response and instability

# publications[].label
A NOVEL NONLINEAR TIME-FREQUENCY STRATEGY FOR STABILIZING INVERTED PENDULUM CART SYSTEM

# publications[].label
On the Dynamic Short-Time Scale Wave Propagation and the Characterization of Optimal Packaging Material for High Performance Electronic Packages

# publications[].label
Characterisation and identification of dynamic instability in milling operation

# publications[].label
Time-frequency based field oriented control of permanent magnet synchronous motors

# publications[].label
Analytical feasibility of laser induced stress wave thermometry applied to silicon wafers

# publications[].label
A comprehensive model for cutting dynamics

# publications[].label
Thermo-elasto-plasto-dynamics of ultrafast optical ablation in polycrystalline metals. Part I: Theoretical formulation

# publications[].label
Chip Stick and Slip Motions of a Machine Tool in the Cutting Process

# publications[].label
THERMOMECHANICAL CHARACTERISTICS OF SILICON WAFER IN RESPONSE TO ULTRAFAST LASER HEATING

# publications[].label
Adaptive Filters and Filtered-x LMS Algorithm

# publications[].label
On short-time-scale stress wave phenomena and initiation of mechanical faults in flip-chip configurations

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Ultrasonic time-frequency characterization of silicon wafers at elevated temperatures

# publications[].label
Non-contact ultrasonic inspection of medical catheters for polymeric bond defects

# publications[].label
Introduction to the special issue on nonlinear dynamics and control of turning and lifting instability

# publications[].label
Precision concurrent speed and position tracking of brushed dc motors using nonlinear time-frequency control

# publications[].label
Characterizing defects in multi-layer materials using guided ultrasonic waves

# publications[].label
Dispersion and Attenuation of Guided Waves in Tubular Section with Multi-Layered Viscoelastic Coating - Part II: Circumferential Wave Propagation

# publications[].label
CONTROL OF FRICTION-INDUCED INSTABILITY IN SIMULTANEOUS TIME-FREQUENCY DOMAIN

# publications[].label
Characterization and detection of crack-induced rotary instability

# publications[].label
Control of a wheeled inverted pendulum-a nonlinear time-frequency approach

# publications[].label
Temporal and spectral responses of a softening Duffing oscillator undergoing route-to-chaos

# publications[].label
NONLINEAR TIME-FREQUENCY CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTORS

# publications[].label
Simultaneous Time-Frequency Control of Dynamic Instability

# publications[].label
Modeling and Theory of Intermittent Motions in a Machine Tool With a Friction Boundary

# publications[].label
Wavelet based algorithms for crack detection in rotor-machinery

# publications[].label
Elasto-viscoplastic dispersive waves in silicon wafers

# publications[].label
On the characteristics and mechanism of rolling instability and chatter

# publications[].label
Using Extenics to describe coupled solutions in Axiomatic design

# publications[].label
A Parameter Study of a Machine Tool with Multiple Boundaries

# publications[].label
Effects of thermomechanical coupling and relaxation times on wave spectrum in dynamic theory of generalized thermoelasticity

# publications[].label
Analysis of chatter dynamics in sheet rolling

# publications[].label
Rapid polymer concrete repairs using available fillers

# publications[].label
CONTROL OF CUTTING VIBRATION AND MACHINING INSTABILITY A TIME-FREQUENCY APPROACH FOR PRECISION, MICRO AND NANO MACHINING Preface

# streetAddress
Texas A&M University; Mechanical Engineering; 3123 TAMU

# etdChairOf[].label
Michalec, Christopher Ryan (2005-08). Development of an optimal impact energy absorber for highway crash cushions. Master's Thesis.

# etdChairOf[].label
Hodkhasa, Sandip (2013-02). Wave Propagation and  Damage Characterization in Natural Fiber Hemp and LLDPE Composite. Master's Thesis.

# etdChairOf[].label
Barron, Taylor Austin (2016-08). Experimentation of Composite Repair Techniques for Pipelines Using Finite Element Analysis with Respect to ASME PCC-2, ISO 24817, and Parametric Models. Master's Thesis.

# etdChairOf[].label
Lo, Tzu-Wei (2005-11). A new sensor concept for simultaneous measurement of pressure, temperature and thickness of plate structures using modified wave propagation theory. Master's Thesis.

# etdChairOf[].label
Dassanayake, Achala Viomy (2009-06). Machining dynamics and stability analysis in longitudinal turning involving workpiece whirling. Doctoral Dissertation.

# etdChairOf[].label
Vedantham, Vikram (2004-11). In-situ temperature and thickness characterization for silicon wafers undergoing thermal annealing. Master's Thesis.

# etdChairOf[].label
Nagaraj, Mahavir (2004-11). Short time scale thermal mechanical shock wave propagation in high performance microelectronic packaging configuration. Master's Thesis.

# etdChairOf[].label
Gegg, Brandon C. (2009-05). An Investigation of the Complex Motions Inherent to Machining Systems via a Discontinuous Systems Theory Approach. Doctoral Dissertation.

# etdChairOf[].label
Qi, Xuele (2011-02). Ultrafast Laser Induced Thermo-Elasto-Visco-Plastodynamics in Single Crystalline Silicon. Doctoral Dissertation.

# etdChairOf[].label
Halfmann, Eric (2012-10). On the Machining Dynamics of Turning and Micro-milling Processes. Master's Thesis.

# etdChairOf[].label
Yang, Baozhong (2004-11). On the characteristics of fault-induced rotor-dynamic bifurcations and nonlinear responses. Doctoral Dissertation.

# etdChairOf[].label
Branigan, Zachary Thomas (2016-08). Quantifying Fatigue Failure Using the Power Density Theory. Master's Thesis.

# etdChairOf[].label
Liu, Li (2006-08). Elasto-viscoplastic wave propagation in single crystallographic silicon thin structure. Master's Thesis.

# etdChairOf[].label
Lewallen, Colby Foster (2016-08). Novel Active Magnetic Bearing Control for a High-Speed Flywheel. Master's Thesis.

# etdChairOf[].label
Liu, Mengkun 1978- (2012-12). Nonlinear Time-Frequency Control Theory with Applications. Doctoral Dissertation.

# etdChairOf[].label
Kuo, Chi-Wei 1982- (2012-11). Guided Wave Propagation in Tubular Section with Multi-Layered Viscoelastic Coating. Master's Thesis.

# etdChairOf[].label
Oh, Yoonchan (2005-11). Multi-physics investigation on the failure mechanism and short-time scale wave motion in flip-chip configuration. Doctoral Dissertation.

# etdChairOf[].label
Huang, Chang-Chia (2010-10). Short-Time Scale Dynamic Failure Modes in a Through-Silicon-Via (TSV) Flip-Chip Configuration. Master's Thesis.