# keywords[]
4019 Resources Engineering And Extractive Metallurgy

# keywords[]
3403 Macromolecular And Materials Chemistry

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
3403 Macromolecular And Materials Chemistry

# keywords[]
4019 Resources Engineering And Extractive Metallurgy

# educationAndTraining[].organization.label
California Institute of Technology - (Pasadena, California, United States)

# educationAndTraining[].organization.label
California Institute of Technology - (Pasadena, California, United States)

# educationAndTraining[].organization.label
Purdue University - (West Lafayette, Indiana, United States)

# publications[].label
Visualization and Simulation of Particle Rearrangement and Deformation During Powder Compaction

# publications[].label
Compression behavior of microcrystalline cellulose spheres: Single particle compression and confined bulk compression across regimes

# publications[].label
Characterizing pyrotechnic igniter output with high-speed schlieren imaging

# publications[].label
The mechanical response of micron-sized molecular crystals

# publications[].label
Analytical model for the impulse of single-cycle pulse detonation tube

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Single-cycle impulse from detonation tubes with nozzles

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Impulse correlation for partially filled detonation ibbes

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Optically recording velocity interferometer system configurations and impact of target surface reflectance properties [invited].

# publications[].label
The Effect of Particle System on Quasistatic Compression Behavior and Damage Accumulation of High Solids Loading Polymer-Particle Composites

# publications[].label
Quantitative, three-dimensional imaging of aluminum drop combustion in solid propellant plumes via digital in-line holography.

# publications[].label
Molten-Salt Battery Response to Open-Circuit and Puncture Testing

# publications[].label
The Effect of Nozzles and Extensions on Detonation Tube Performance

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
ANFO RESPONSE TO LOW-STRESS PLANAR IMPACTS

# publications[].label
High-Speed Stereomicroscope Digital Image Correlation of Rupture Disc Behavior

# publications[].label
An experimental investigation of the effect of walls on gas-liquid flows through fixed particle beds

# publications[].label
Experiments Studying Thermal Cracking, Catalytic Cracking, and Pre-Mixed Partial Oxidation of JP-10

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
The Effect of a Porous Thrust Surface on Detonation Tube Impulse

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Imaging perturbed shock propagation in powders.

# publications[].label
Interaction of grain morphology and intergranular friction on grain packing.

# publications[].label
Design of a Multi-Point Microwave Interferometer Using the Electro-Optic Effect

# publications[].label
Lift to Drag Comparison Between Different Low Speed Airfoil Designs

# publications[].publisher
American Institute of Aeronautics and Astronautics

# publications[].label
Direct experimental impulse measurements for detonations and deflagrations

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Anomalous Combustion of Damaged Propellants: A Concern for Advanced Delivery Systems

# publications[].label
ADL ORVIS: an air-delay-leg, line-imaging optically recording velocity interferometer system.

# publications[].label
Inelastic peridynamic model for molecular crystal particles

# publications[].label
Reply to Comment on "Analytical Model for the Impulse of Single-Cycle Pulse Detonation Tube" by W.H. Heiser and D.T. Pratt

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Effect of porous thrust surfaces on detonation transition and detonation tube impulse

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Electrical conductivity of porous binary powder mixtures

# publications[].label
The Effect of Particle System on Quasistatic Compression Behavior and Damage Accumulation of High Solids Loading Polymer-Particle Composites

# publications[].label
The Effect of Transient Nozzle Flow on Detonation Tube Impulse

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
An analytical model for the impulse of a single-cycle pulse detonation engine

# publications[].publisher
American Institute of Aeronautics and Astronautics

# publications[].label
Analytical model for the impulse of single-cycle pulse detonation tube (vol 19, pg 22, 2003)

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Electrical Conductivities of Conductors, Semiconductors, and Their Mixtures at Elevated Temperatures

# publications[].label
Intermediate Strain Rate Behavior of a Polymer-Particle Composite with High Solids Loading

# publications[].label
Molten-Salt Battery Response to Open-Circuit and Puncture Testing

# publications[].label
High-speed (20kHz) digital in-line holography for transient particle tracking and sizing in multiphase flows.

# publications[].label
Development of a Multiphase Shock Tube for Energetic Materials Characterization

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
ON THE DEVELOPMENT OF AN IMPACT-LOADED WEDGE TEST USING ORVIS

# publications[].label
Reply to Comment on "Analytical Model for the Impulse of Single Cycle Pulse Detonation Tube" by M. I. Radulescu and R. K. Hanson

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Detonation tube impulse in subatmospheric environments

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Study of aluminum particle combustion in solid propellant plumes using digital in-line holography and imaging pyrometry

# publications[].label
Mesostructure Evolution During Powder Compression: Micro-CT Experiments and Particle-Based Simulations

# publications[].label
The burning regimes and conductive burn rates of titanium subhydride potassium perchlorate (TiH1.65/KClO₄) in hybrid closed bomb-strand burner experiments

# publications[].label
A Statistical Representation of Pyrotechnic Research Igniter Output

# publications[].label
STATIC AND DYNAMIC COMPACTION OF CL-20 POWDERS

# publications[].label
Cookoff Experiments and Models of an Additively Manufactured Explosive

# publications[].label
The role of randomly packed particles on macroscopic elastic bonded grain properties

# publications[].label
Determination of thermal diffusivity, conductivity, and energy release from the internal temperature profiles of energetic materials

# publications[].label
Direct experimental impulse measurements for detonations and deflagrations

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# etdChairOf[].label
Luke, Mark (2023-05). Polymer-Particle Composite Material Failure Characterization in Quasistatic Compression and Dynamic Impact Regimes. Master's Thesis.