# publisherOf[].label
Making-a-Scene: A Preliminary Case Study on Speech-Based 3D Shape Exploration Through Scene Modeling

# publisherOf[].label
Thermal Performance of Angled, V-Shaped, and W-Shaped Rib Turbulators in Rotating Rectangular Cooling Channels (AR = 4:1)

# publisherOf[].label
TILTING PAD JOURNAL BEARINGS - A DISCUSSION ON STABILITY CALCULATION, FREQUENCY DEPENDENCE, AND PAD AND PIVOT FLEXIBILITY

# publisherOf[].label
Direct Single-Stage Processing of Lightweight Alloys Into Sheet by Hybrid Cutting-Extrusion

# publisherOf[].label
Optimized upper bound analysis of axisymmetric extrusion using spherical velocity field

# publisherOf[].label
Film-cooling effectiveness on a rotating turbine platform using pressure sensitive paint technique

# publisherOf[].label
Experimental Study of the Effect of Periodic Unsteady Wake Flow on Boundary Layer Development, Separation, and Re-Attachment Along the Surface of a Low Pressure Turbine Blade

# publisherOf[].label
Un-shocked High Amplitude Standing Waves in Wave-shaped Resonators

# publisherOf[].label
Advanced Deconvolution Technique for Analyzing Multirate Well Test Data

# publisherOf[].label
Experimental Investigation on the Onset of Gas Entrainment from a Stratified Two-Phase Region Through Multiple Branches Mounted on a Curved Surface

# publisherOf[].label
Measurements of rotordynamic coefficients of hybrid bearings with (a) a plugged orifice, (b) a worn land surface

# publisherOf[].label
GENERATING TECHNOLOGY EVOLUTION PREDICTION INTERVALS WITH BOOTSTRAP METHOD

# publisherOf[].label
A CHANGE-POINT PRINCIPAL COMPONENT ANALYSIS (CP/PCA) METHOD FOR PREDICTING ENERGY USAGE IN COMMERCIAL BUILDINGS - THE PCA MODEL

# publisherOf[].label
Prediction of Film Cooling and Heat Transfer on a Rotating Blade Platform With Stator-Rotor Purge and Discrete Film-Hole Flows in a 1-1/2 Turbine Stage

# publisherOf[].label
The Transient Temperature Prediction in the Deepwater Riserless Well

# publisherOf[].label
NOVEL BIO-SYNTHETIC GRAFT FOR TRACHEAL RECONSTRUCTION IN PEDIATRIC PATIENTS WITH CONGENITAL TRACHEAL STENOSIS: IN VITRO STUDIES OF AXIAL, AND BENDING BIOMECHANICS

# publisherOf[].label
Evaluation of Some Commercial VR Environments: Trends and Directions

# publisherOf[].label
OPTIMIZATION OF A FORWARD-SWEPT COMPLIANT MECHANISM

# publisherOf[].label
Laser-optic evaluation for bond quality of polymeric medical tubing

# publisherOf[].label
Design for Multi-Material Manufacturing Using Polyjet Printing Process: A Review

# publisherOf[].label
MICROMECHANICS OF ACTIVE COMPOSITES WITH SMA FIBERS

# publisherOf[].label
Fluid Dynamics of Condensed Droplets on Microscale Hybrid Surfaces

# publisherOf[].label
Modeling and Multivariable Control Design Methodologies for Hexapod-Based Satellite Vibration Isolation

# publisherOf[].label
Amphiphilic Zirconium Phosphate Nanoparticles as Tribo-Catalytic Additives of Multi-Performance Lubricants

# publisherOf[].label
CHARACTERIZATION OF AN ELECTRODYNAMIC DUST SHIELD DEVICE FOR PV PANEL SOILING MITIGATION

# publisherOf[].label
Fail Safe, High Temperature Magnetic Bearings

# publisherOf[].label
Experimental Implementation of Opposed Shape Memory Alloy Wires for Actuator Control

# publisherOf[].label
A Study on the Performance and Emissions Characteristics of a DI Compression Ignition Engine Operated With LPG and DTBP Blending Fuels

# publisherOf[].label
Effects of Fluid Shear Stress on Endothelial Cell Invasion Into Three-Dimensional Matrices

# publisherOf[].label
AUTOMATED MODELING OF BUILDING HVAC SYSTEMS FOR MPC

# publisherOf[].label
THE INFLUENCE OF HYDRODYNAMIC BEARING CONFIGURATION ON MORTON EFFECT

# publisherOf[].label
PARAMETRIZATION OF LTI CONTROLLERS FOR MULTIRATE SYSTEMS

# publisherOf[].label
Queries and Cues: Textual Stimuli for Reflective Thinking in Digital Mind-Mapping

# publisherOf[].label
MEASURED ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF A TOOTH-ON-ROTOR LABYRINTH SEAL WITH COMPARISONS TO A TOOTH-ON-STATOR LABYRINTH SEAL AND PREDICTIONS

# publisherOf[].label
Investigating Mind-Mapping as a Tool for Problem Exploration in Early Design

# publisherOf[].label
Sustainable Design Through Flexible Product Evolution

# publisherOf[].label
Nucleation and Boundary Layer Growth of Shear Bands in Machining

# publisherOf[].label
Film cooling effectiveness distributions on a turbine blade cascade platform with stator-rotor purge and discrete film hole flows

# publisherOf[].label
Vat Photopolymerization3D Printing of Nanocomposites: A Literature Review

# publisherOf[].label
On Tightly Bounding the Dubins Traveling Salesman's Optimum

# publisherOf[].label
Electrical and Thermal Conductivities of Carbon Nanotube-Epoxy Composites: Modeling and Characterization

# publisherOf[].label
Improving Designer Learning in Design Space Exploration by Adapting to the Designers Learning Goals

# publisherOf[].label
Creep Responses of Smart Sandwich Composites at Multiple Length Scales: Experiments and Modeling

# publisherOf[].label
Effect of Higher-Order Hydrocarbons on Methane-Based Fuel Chemistry at Gas Turbine Pressures

# publisherOf[].label
A Fourier series model to predict hourly heating and cooling energy use in commercial buildings with outdoor temperature as the only weather variable

# publisherOf[].label
A Propeller Model for Steady-State and Transient Performance Prediction of Turboprop and Counter-Rotating Open Rotor Engines

# publisherOf[].label
Laser induced nano-droplet ejection for the construction of nano-inkjets

# publisherOf[].label
Evolving Systems: Adaptive Key Component Control With Persistent Disturbance Rejection

# publisherOf[].label
Vibration Control of Laminated Composite Plates Using Magnetostrictive Layers

# publisherOf[].label
UNSTEADY WAKE OVER A LINEAR TURBINE BLADE CASCADE WITH AIR AND CO2 FILM INJECTION .2. EFFECT ON FILM EFFECTIVENESS AND HEAT-TRANSFER DISTRIBUTIONS

# publisherOf[].label
TPIV Experimental Investigation of Film Coolant-to-Mainstream Interaction From Shaped Cooling Holes With Various Inlet Geometries

# publisherOf[].label
A Hybrid Model to Predict the Onset of Gas Entrainment With Surface Tension Effects

# publisherOf[].label
HEAT TRANSFER IN A RIB AND PIN ROUGHENED ROTATING MULTI-PASS CHANNEL WITH HUB TURNING VANE AND TRAILING-EDGE SLOT EJECTION

# publisherOf[].label
Estimation of Relative Permeability and Capillary Pressure for PUNQ-S3 Model Using a Modified Iterative Ensemble Smoother

# publisherOf[].label
Short Paper: An Initial Investigation of the Correlations Between the Quality of Engineering Assignments and Task-Independent Features

# publisherOf[].label
Experimental Validation of Simultaneous Gust Alleviation and Energy Harvesting for Multifunctional Composite Wing Spars

# publisherOf[].label
Effective Yield Criterion Accounting for Microvoid Coalescence

# publisherOf[].label
Effect of upstream wake with vortex on turbine blade platform film cooling with simulated stator-rotor purge flow

# publisherOf[].label
Numerical Investigation and Geometric Parameterization of Lamination Inlet of Passive Micromixer

# publisherOf[].label
BINDER JETTING ADDITIVE MANUFACTURING OF CERAMICS: A LITERATURE REVIEW

# publisherOf[].label
COMBUSTION TRAJECTORY VISUALIZATION MODEL FOR STUDY OF CONVENTIONAL AND ADVANCED DIRECT INJECTION COMBUSTION MODES

# publisherOf[].label
DESIGN OF NOVEL NANOCOMPOSITE NITRIDE COATINGS FOR SEVERE TRIBOLOGICAL APPLICATIONS

# publisherOf[].label
Local Heat Transfer Measurements in Micro Geometries Using Liquid Crystal Thermography

# publisherOf[].label
On the Effect of Thermal Energy Transport to the Performance of (Semi) Floating Ring Bearing Systems for Automotive Turbochargers

# publisherOf[].label
Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing-Part I: Theoretical Modeling

# publisherOf[].label
Extending the Use of Bio-Inspiration for Water Distribution Networks to Urban Settings

# publisherOf[].label
Design, Fabrication and Testing of a Novel Thermally-Actuated Tesla Valve (TATV): A Hybrid Microvalve

# publisherOf[].label
ANNULAR HONEYCOMB-STATOR TURBULENT GAS SEAL ANALYSIS USING A NEW FRICTION-FACTOR MODEL-BASED ON FLAT-PLATE TESTS

# publisherOf[].label
Characterization of Cryogenic Spray Nozzles With Application to Skin Cooling

# publisherOf[].label
Characteristic response of a production diesel oxidation catalyst exposed to lean and rich PCI exhaust

# publisherOf[].label
ANALYSIS FOR ROTORDYNAMIC COEFFICIENTS OF HELICALLY-GROOVED TURBULENT ANNULAR SEALS

# publisherOf[].label
Efficient Multiline Anchor Systems for Floating Offshore Wind Turbines

# publisherOf[].label
TEST AND THEORY FOR PIEZOELECTRIC ACTUATOR-ACTIVE VIBRATION CONTROL OF ROTATING MACHINERY

# publisherOf[].label
Development of Coupled Program FAST-SIMDYN and Study of Non-Linear Hydrodynamics, Coupled With Negative Damping and Aerodynamics of Floating Offshore Wind Turbines

# publisherOf[].label
Dynamic Characterization of Tilting Pad Journal Bearings From Component and System Level Testing

# publisherOf[].label
An Analytical Model of Tumors With Higher Permeability Than Surrounding Tissues for Ultrasound Elastography Imaging

# publisherOf[].label
Effects of Jet-to-Target Surface Spacing and Pin-Fin Height on Jet Impingement Heat Transfer in a Rectangular Channel

# publisherOf[].label
Partially Averaged Navier-Stokes (PANS) Method for Turbulence Simulations: Flow Past a Circular Cylinder

# publisherOf[].label
Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:2 and AR=1:4) With 45 Angled Rib Turbulators

# publisherOf[].label
EXAMINING ADAPTIVE EXPERTISE: A NOVEL COMPARISON OF STUDENT AND PRACTICING ENGINEER CAD MODELING PERFORMANCE

# publisherOf[].label
Volumetric Flank Wear Characterization for Titanium Milling Insert Tools

# publisherOf[].label
High temperature characterization of a radial magnetic bearing for turbomachinery

# publisherOf[].label
Design of a Radiolucent Cranial Fixation Device

# publisherOf[].label
TPIV Experimental Investigation of Film Coolant-to-Mainstream Interaction From Shaped Cooling Holes With Various Inlet Geometries

# publisherOf[].label
Fabrication of Bi Nanowires Using a Vacuum Melting and Mechanical Injection Technique

# publisherOf[].label
Can We Localize an Autonomous Vehicle From a Single Image? Deep-Geometric Six Degrees-of-Freedom Localization in Topo-Metric Maps

# publisherOf[].label
INVERSE DESIGN OF LCN FILMS FOR ORIGAMI APPLICATIONS USING TOPOLOGY OPTIMIZATION

# publisherOf[].label
A NEW DESIGN FOR VARIABLE DIAMETER ORIFICE MECHANISM

# publisherOf[].label
Measurements versus predictions for the dynamic impedance of annular gas seals - Part I: Test facility and apparatus

# publisherOf[].label
Quantitative Analysis of Forced and Unforced Turbulent Multiphase Coaxial Jets

# publisherOf[].label
Endwall Contouring Using Continuous Diffusion: A Breakthrough Method and its Application to a Three-Stage High Pressure Turbine

# publisherOf[].label
GAS BEARING TECHNOLOGY FOR OIL-FREE MICROTURBOMACHINERY - RESEARCH EXPERIENCE FOR UNDERGRADUATE (REU) PROGRAM AT TEXAS A&M UNIVERSITY

# publisherOf[].label
EXAMINING THE EFFECTS OF CAD MODEL ATTRIBUTES ON ALTERATION TIME AND PROCEDURE

# publisherOf[].label
Numerical Prediction of Film Cooling and Heat Transfer With Different Film-Hole Arrangements on the Plane and Squealer Tip of a Gas Turbine Blade

# publisherOf[].label
THE EFFECT OF IMPURITIES ON IGNITION DELAY TIMES AND LAMINAR FLAME SPEEDS OF SYNGAS MIXTURES AT GAS TURBINE CONDITIONS

# publisherOf[].label
Control of a Shape Memory Alloy Based Self-Folding Sheet

# publisherOf[].label
Evaluation of Different Turbulence Models Applied in Turbopumps Hydraulic Turbine

# publisherOf[].label
Relationship between vibration frequencies of Reddy and Kirchhoff polygonal plates with simply supported edges

# publisherOf[].label
Gas Turbine Design Point Definition Using Economics, Environmental and Optimization Aspects

# publisherOf[].label
A STUDY OF NEGATIVE DAMPING IN FLOATING WIND TURBINES USING COUPLED PROGRAM FAST-SIMDYN

# publisherOf[].label
Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling-Part II: Implementation With Machine Learning

# publisherOf[].label
ROTORDYNAMIC CHARACTERISTICS OF A 5 PAD, ROCKER-PIVOT, TILTING PAD BEARING IN A LOAD-ON-PAD CONFIGURATION; COMPARISONS TO PREDICTIONS AND LOAD-BETWEEN-PAD RESULTS

# publisherOf[].label
Experimental Evaluation of Novel Swirl Flow Air-Water Separation Apparatus for Desalination/Water Remediation Applications

# publisherOf[].label
DYNAMIC-RESPONSE OF A SINGLE FLEXIBLE CYLINDER IN WAVES

# publisherOf[].label
Spectrum Shifting as a Mechanism to Improve Performance of VHTRs with Advanced Actinide Fuels

# publisherOf[].label
NUMERICAL STUDY ON THE EFFECT OF REAL SYNGAS COMPOSITIONS ON IGNITION DELAY TIMES AND LAMINAR FLAME SPEEDS AT GAS TURBINE CONDITIONS

# publisherOf[].label
On the Observability of Quantum Dynamical Systems

# publisherOf[].label
Influence of Surface Heating Condition on Local Heat Transfer in a Rotating Square Channel With Smooth Walls and Radial Outward Flow

# publisherOf[].label
A Geometrically Inspired Model for Brittle Damage in Compressible Elastomers

# publisherOf[].label
Characterization and Modeling of Thermo-Mechanical Fatigue in Equiatomic NiTi Actuators

# publisherOf[].label
Rotordynamic Characteristics of a Five Pad, Rocker-Pivot, Tilting Pad Bearing in a Load-on-Pad Configuration; Comparisons to Predictions and Load-Between-Pad Results

# publisherOf[].label
Disturbance Accommodating Control Design for Wind Turbines Using Solvability Conditions

# publisherOf[].label
Usage of an Interactive Learning Platform in Project-Based Graduate Courses for the Preliminary Design of Axial Turbines

# publisherOf[].label
Adhesion forces for sub-10 nm flying-height magnetic storage Head Disk Interfaces

# publisherOf[].label
Ecological Principles and Metrics for Improving Material Cycling Structures in Manufacturing Networks

# publisherOf[].label
PARAMETRIC ROLL OF HIGH SPEED SHIPS IN REGULAR WAVES

# publisherOf[].label
Development of Two-Dimensional Turbulent Wakes in a Curved Channel at Positive Streamwise Pressure Gradient

# publisherOf[].label
Effects of Screen Laminates on Droplet-Induced Film Hydrodynamics and Surface Heat Transfer

# publisherOf[].label
The Flow Machines Course at the Technological Institute of Aeronautics for Mechanical-Aeronautical Engineering Undergraduate Course

# publisherOf[].label
Controlling Backfire for a Hydrogen-Fueled Engine Using External Mixture Injection

# publisherOf[].label
An Analytical Model of Flow Boiling Heat Transfer for Slug Flow in a Single Circular Horizontal Micro-Channel

# publisherOf[].label
IDENTIFICATION OF POTENTIAL STATEWIDE INTERCITY RAIL AND BUS TRANSIT CORRIDORS IN TEXAS

# publisherOf[].label
CH Kinetics Measurements and Their Importance for Modeling Prompt NOx Formation in Gas Turbines

# publisherOf[].label
Scales of Turbulence During Boundary Layer Transition Under Steady and Unsteady Flow Conditions

# publisherOf[].label
VALIDATION AND RESULTS OF A PSEUDO-MULTI-ZONE COMBUSTION TRAJECTORY PREDICTION MODEL FOR CAPTURING SOOT AND NOX FORMATION ON A MEDIUM DUTY DIESEL ENGINE

# publisherOf[].label
Coupled Dynamic Analysis of a Mini TLP: Comparison With Measurements

# publisherOf[].label
Sub-Optimal Control of Autonomous Wheel Loader With Approximate Dynamic Programming

# publisherOf[].label
A Control Design Approach for TITO Systems Using Measured Data

# publisherOf[].label
On-Line Prediction of Resistant Force During SoilTool Interaction

# publisherOf[].label
Jet Impingement Heat Transfer in a Rectangular Channel With Smooth and Pinned Target Walls

# publisherOf[].label
Experimental Measurements of the Wake of a Sphere at Subcritical Reynolds Numbers

# publisherOf[].label
A REFINED SMALL STRAIN AND MODERATE ROTATION THEORY OF ELASTIC ANISOTROPIC SHELLS

# publisherOf[].label
Liftoff and Blow Off Characteristics of Laminar Non-Premixed Planar Jets

# publisherOf[].label
PaDGAN: Learning to Generate High-Quality Novel Designs

# publisherOf[].label
Synthesis and Characterization of Radiopaque Shape Memory Polymers

# publisherOf[].label
Loading-Unloading Cycles of Three-Dimensional-Printed Built Bimaterial Structures With Ceramic and Elastomer

# publisherOf[].label
Effect of turbulence intensity and periodic unsteady wake flow condition on boundary layer development, separation, and re-attachment over the separation bubble along the suction surface of a low pressure turbine blade

# publisherOf[].label
Rotordynamic-coefficients and static (equilibrium loci and leakage) characteristics laminar-flow for annular seals

# publisherOf[].label
CONTROL DESIGN FOR THE SYSTEM OF MANIPULATOR HANDLING A FLEXIBLE PAYLOAD WITH INPUT CONSTRAINTS

# publisherOf[].label
ASSESSMENT OF CURRENT CHEMILUMINESCENCE KINETICS MODELS AT ENGINE CONDITIONS

# publisherOf[].label
SPEED CONTROL OF AN INERTIA LOAD CONNECTED TO A MOTOR THROUGH A COMPLIANT MECHANICAL TRANSMISSION SYSTEM

# publisherOf[].label
A Dynamic Spar Numerical Model for Passive Shape Change

# publisherOf[].label
BOUNDARY AND MIXED FRICTION IN THE PRESENCE OF DYNAMIC NORMAL LOADS .1. SYSTEM MODEL

# publisherOf[].label
On the physics of flow separation along a low pressure turbine blade under unsteady flow conditions

# publisherOf[].label
A COMPUTATIONALLY EFFICIENT OPTIMAL POWER MANAGEMENT FOR POWER SPLIT HYBRID VEHICLE BASED ON PONTRYAGIN'S MINIMUM PRINCIPLE

# publisherOf[].label
Tribological Investigation of Cast Iron Air-Conditioning Compressor Surfaces in CO2 Refrigerant

# publisherOf[].label
Tailoring Thermoelectric Properties of Segregated-Network Polymer Nanocomposites for Thermoelectric Energy Conversion

# publisherOf[].label
THERMAL PERFORMANCE OF POLY ALPHA OLEFIN NANOFLUID WITH SPHERICAL AND NON-SPHERICAL NANOPARTICLES

# publisherOf[].label
Optimizing Laminar Natural Convection for a Heat Generating Cylinder in a Channel

# publisherOf[].label
Effect of Adiabatic Co-Planar Extension Surfaces on Wind-Related Solar-Collector Heat Transfer Coefficients

# publisherOf[].label
Applied Tests of Design Skills: Divergent Thinking Data Analysis and Reliability Studies

# publisherOf[].label
Control and Powertrain Management for Multi-Autonomous Hybrid Vehicles

# publisherOf[].label
Film-Cooling Effectiveness on a Rotating Turbine Platform Using Pressure Sensitive Paint Technique

# publisherOf[].label
Single plane radial, magnetic bearings biased with poles containing permanent magnets

# publisherOf[].label
Film Cooling Effectiveness Comparison on Full-Scale Turbine Vane Endwalls Using PSP Technique

# publisherOf[].label
APPLICATION OF THE POD METHOD FOR CRACKED ROTORS

# publisherOf[].label
Optimal Control of Web Guides Using a New Fiber Optic Edge Sensor

# publisherOf[].label
Pulsatile flow effects on the hemodynamics of intracranial aneurysms.

# publisherOf[].label
Correlation of the Volumetric Tool Wear Rate of Carbide Milling Inserts With the Material Removal Rate of Ti6Al4V

# publisherOf[].label
Comparison of analytical and centrifuge model tests for suction caissons subjected to combined loads

# publisherOf[].label
EFFECTS OF SPINDLE SPEED ON TURNING STABILITY

# publisherOf[].label
A PRELIMINARY EVALUATION OF THE COMPUTATIONAL FLUID DYNAMICS CAPABILITIES IN MOOSE

# publisherOf[].label
An Information-Theoretic Model of Project Schedule Overruns Caused by Task Rework: A Case for Newspeak

# publisherOf[].label
EXPERIMENTAL INVESTIGATION OF LEADING EDGE IMPINGEMENT UNDER HIGH ROTATION NUMBERS WITH RACETRACK SHAPED JETS

# publisherOf[].label
Periodic tension disturbance attenuation in web process lines using active dancers

# publisherOf[].label
Metal Binder Jetting Additive Manufacturing: A Literature Review

# publisherOf[].label
A Proposal for Passive Wall Treatment Applied in High Performance Axial Flow Compressors

# publisherOf[].label
Comparison of Rotary and Linear Cutting Methodology in Determining Specific Cutting Energy of Granite

# publisherOf[].label
TECHNOLOGY EVOLUTION MODELING AND DECISION MAKING UNDER UNCERTAINTY

# publisherOf[].label
Non-Quadratic Strain Gradient Plasticity Theory and Size Effects in Constrained Shear

# publisherOf[].label
Stability of a Rotor Partially Filled With Fluid: Test Facility and Experimental Results

# publisherOf[].label
Experimental Flow Field Investigations of Nozzle Film Cooling Scheme on a Flat Plate Using Stereo PIV

# publisherOf[].label
A Generalized Diffusion Layer Model for Condensation of Vapor With Noncondensable Gases

# publisherOf[].label
Influence of Assumed Strain Hardening Relation on Plastic Stress-Strain Response Identification From Conical Indentation

# publisherOf[].label
A Comparative Aerodynamic and Performance Study of a Three-Stage High Pressure Turbine With 3-D Bowed Blades and Cylindrical Blades

# publisherOf[].label
A REDUCED-ORDER MODEL FOR TURBOMACHINERY FLOWS USING PROPER ORTHOGONAL DECOMPOSITION

# publisherOf[].label
SPECIAL ISSUE: BIOLOGICALLY INSPIRED DESIGN

# publisherOf[].label
COUPLED DYNAMIC ANALYSIS FOR MULTI-UNIT FLOATING OFFSHORE WIND TURBINE IN MAXIMUM OPERATIONAL AND SURVIVAL CONDITIONS

# publisherOf[].label
LENGTH AND SEQUENCE DEPENDENCE OF THE ELASTICITY OF ALPHA HELICES AND COILED-COILS

# publisherOf[].label
Shock-Based Experimental Investigation of the Linear Particle Chain Impact Damper

# publisherOf[].label
Rotary Ultrasonic Machining of Dental Ceramics: A Preliminary Study on Subsurface Cracks

# publisherOf[].label
THE EFFECT OF CELL-PHONE USE ON DRIVER ATTENTION

# publisherOf[].label
Visual Representations as an Aid to Concept Generation

# publisherOf[].label
An Overview of the Direct Energy Conversion Power Production Program

# publisherOf[].label
Numerical study of a rotating blade platform with film cooling from cavity purge flow in a 1-% turbine stage

# publisherOf[].label
Investigating Force-Feedback in Mid-Air Sketching of Multi-Planar Three-Dimensional Curve-Soups

# publisherOf[].label
SIMULATIONS AND ANALYSIS OF SHOCK ACCELERATED INHOMOGENOUS FLOWS WITH AND WITHOUT RESHOCK

# publisherOf[].label
Three-dimensional numerical simulations of circular cylinders undergoing two degree-of-freedom vortex-induced vibrations

# publisherOf[].label
A Direct Synthesis Method for Early Stage Parametric Design of Large-Scale Mechanical Systems

# publisherOf[].label
TILTING PAD JOURNAL BEARINGS: ON BRIDGING THE HOT GAP BETWEEN EXPERIMENTAL RESULTS AND MODEL PREDICTIONS

# publisherOf[].label
Effects of Clearance on the Performance of a Labyrinth Seal Under Wet-Gas Conditions

# publisherOf[].label
Measuring Human Learning in Design Space Exploration to Assessx0bEffectiveness of Knowledge Discovery Tools

# publisherOf[].label
ON THE RELATIONSHIP BETWEEN FUEL INJECTION PRESSURE AND TWO-STAGE IGNITION BEHAVIOR OF LOW TEMPERATURE DIESEL COMBUSTION

# publisherOf[].label
FINITE ELEMENT ANALYSIS FOR NONLINEAR TIME DEPENDENT RESPONSE OF PIEZOELECTRIC MATERIALS

# publisherOf[].label
Youngs Modulus Measurement of Electroplated Nickel Using AFM

# publisherOf[].label
PRESWIRL AND MIXED-FLOW (MAINLY-LIQUID) EFFECTS ON ROTORDYNAMIC PERFORMANCE OF A LONG (L/D=0.75) SMOOTH SEAL

# publisherOf[].label
Leveraging Design Heuristics for Multi-Objective Metamaterial Design Optimization

# publisherOf[].label
Theoretical Foundations for Tuning Parameter Tolerance Design

# publisherOf[].label
Heat transfer in two-pass rotating rectangular channels (AR=1:2 and AR=1:4) with 45 deg angled rib turbulators

# publisherOf[].label
Simulation of a Multi-Stage Cooling Scheme for Gas Turbine Engines: Part I

# publisherOf[].label
MODE I STEADY CRACK-GROWTH IN SUPERELASTIC SHAPE MEMORY ALLOYS

# publisherOf[].label
Experimental Leakage and Rotordynamic Results for Helically Grooved Annular Gas Seals

# publisherOf[].label
NANO-SCALE HARDNESS & ABRASION RESISTANCE OF DIRECTED ENERGY DEPOSITED CO-CR-MO BIOMEDICAL ALLOY

# publisherOf[].label
CONVERGENT-TAPERED ANNULAR SEALS - ANALYSIS AND TESTING FOR ROTORDYNAMIC COEFFICIENTS

# publisherOf[].label
A Methodology for Model Selection in Engineering Design

# publisherOf[].label
A HYBRID SENSITIVITY ANALYSIS FOR USE IN EARLY DESIGN

# publisherOf[].label
Some Studies of the Effects of Axial Conduction in a Tube Wall on the Steady-State Laminar Convective Heat Transfer

# publisherOf[].label
Development of a Search Tool to Identify Structural Design Principles for Bioinspired Materials Design

# publisherOf[].label
Experimental and Numerical Characterization of an Orifice type Cryogenic Pulse Tube Refrigerator

# publisherOf[].label
The effects of oxygen enrichment of combustion air for spark-ignition engines using a thermodynamic cycle simulation

# publisherOf[].label
Bifurcation Analysis of a Rotor Supported by Five-Pad Tilting Pad Journal Bearings Using Numerical Continuation

# publisherOf[].label
Vibration of Thick Rectangular Plates of Bimodulus Composite Material

# publisherOf[].label
LIMITATIONS OF EMPLOYING UNDIRECTED INFORMATION FLOW GRAPHS FOR THE MAINTENANCE OF RIGID VEHICULAR FORMATIONS

# publisherOf[].label
Loading-Unloading Cycles of 3D-Printing Built Bi-Material Structures With Ceramic and Elastomer

# publisherOf[].label
APPLICATION OF S-PIV FOR INVESTIGATION OF ROUND AND SHAPED FILM COOLING HOLES AT HIGH DENSITY RATIOS

# publisherOf[].label
A New Method of Porous Space Reconstruction Using Multipoint Histogram Technology

# publisherOf[].label
Laser Sintering of Copper Nanoparticles: A Simplified Model for Fluence Estimation and Validation

# publisherOf[].label
Ignition of Various Lubricating Oil Compositions Using a Shock Tube

# publisherOf[].label
Computational Evaluation of Thermal Response of Open-Cell Foam With Circular Pore

# publisherOf[].label
Parallel Implementation of Periodic Boundary Conditions for a Curvilinear Immersed Boundary Method

# publisherOf[].label
ANALYSIS OF FILM COOLING WITH HIGH-ASPECT-RATIO HOLES: HEAT TRANSFER MECHANISMS

# publisherOf[].label
VOID NUCLEATION EFFECTS IN BIAXIALLY STRETCHED SHEETS

# publisherOf[].label
Multilevel Aligned Empirical Studies of Ideation: Final Results

# publisherOf[].label
IGNITION DELAY TIME AND LAMINAR FLAME SPEED CALCULATIONS FOR NATURAL GAS/HYDROGEN BLENDS AT ELEVATED PRESSURES

# publisherOf[].label
Film cooling effectiveness on the leading edge region of a rotating turbine blade with two rows of film cooling holes using pressure sensitive paint

# publisherOf[].label
A comparison of two methods for predicting emissions from aircraft gas turbine combustors

# publisherOf[].label
Analyses of Plastic Flow Localization in Metals

# publisherOf[].label
Nonhyperelastic Nature of an Elastomeric High Strain Material

# publisherOf[].label
Viscous Shear Banding in Cutting of Metals

# publisherOf[].label
Identification of Rotordynamic Forces in a Flexible Rotor System Using Magnetic Bearings

# publisherOf[].label
EXPERIMENTAL PERFORMANCE OF AN OPEN ENDS, CENTRALLY GROOVED, SQUEEZE FILM DAMPER OPERATING WITH LARGE AMPLITUDE ORBITAL MOTIONS

# publisherOf[].label
Ink Rheology Regulates Stability of Bioprinted Strands.

# publisherOf[].label
A New Robustness Theorem for the Adaptive Control of Nonlinear Systems

# publisherOf[].label
Shooting With Deflation Algorithm-Based Nonlinear Response and Neimark-Sacker Bifurcation and Chaos in Floating Ring Bearing Systems

# publisherOf[].label
On the Design of Mooring Lines for Deep Water Applications

# publisherOf[].label
Simplified Building and Air Handling Unit Model Calibration and Applications

# publisherOf[].label
Nanoscale joule heating along silicon nanowire and its nanoscale heater application

# publisherOf[].label
CATCHER BEARING LIFE PREDICTION USING A RAINFLOW COUNTING APPROACH

# publisherOf[].label
MODELING OF THE EFFECTIVE ACTUATION RESPONSE OF SMA-MAX PHASE COMPOSITES WITH PARTIALLY TRANSFORMING NITI

# publisherOf[].label
Stiffness Changes in Laminates Caused by Intralaminar Cracks and Shear Deformation

# publisherOf[].label
Functional and Mathematical Equivalence of Mechanisms: A Novel Approach to Integrating Synthesis and Design Analysis

# publisherOf[].label
Spray and cooling dynamics of cryogen sprays impinging on a human skin model

# publisherOf[].label
Nonlinear Time-Domain Simulation of the Heaving-Buoy Type Wave Energy Converter by Using Three-Dimensional Potential Numerical Wave Tank Under Irregular Wave Conditions

# publisherOf[].label
A Modal Transient Rotordynamic Model for Dual-Rotor Jet Engine Systems

# publisherOf[].label
Influence of Variable Geometry Compressor on Transient Performance of Counter-Rotating Open Rotor Engines

# publisherOf[].label
Nonlinear Viscoelastic Behavior of Active Fiber Composites

# publisherOf[].label
Evaluation of DLC coatings for foil bearing applications

# publisherOf[].label
An experimental investigation of the effect of walls on gas-liquid flows through fixed particle beds

# publisherOf[].label
A Flow Boiling Heat Transfer Investigation of FC-72 in a Microtube Using Liquid Crystal Thermography

# publisherOf[].label
THERMODYNAMIC, ENVIRONMENTAL AND COST EVALUATION OF COMPRESSIONABSORPTION PARALLEL AND CASCADE REFRIGERATION CHILLER

# publisherOf[].label
Characterization of the Finite Element Computational Fluid Dynamics Capabilities in the Multiphysics Object Oriented Simulation Environment

# publisherOf[].label
Effective Higher-Order Time Integration Algorithms for the Analysis of Linear Structural Dynamics

# publisherOf[].label
Serious Gaming for Design and Systems Engineering Research

# publisherOf[].label
EXPERIMENTAL PID CONTROLLER DESIGN: A NEW FREQUENCY DOMAIN APPROACH BASED ON DESIRED PERFORMANCE

# publisherOf[].label
A Base Study to Investigate MASH Conservativeness of Occupant Risk Evaluation

# publisherOf[].label
Numerical And Experimental Investigation of Aerodynamics On Flow Around A Highly Loaded Low-Pressure Turbine Blade with Flow Separation Under Steady And Periodic Unsteady Inlet Flow Condition

# publisherOf[].label
UNIVERSAL PRODUCT FAMILY DESIGN VALUATION IN AN UNCERTAIN MARKET ENVIRONMENT

# publisherOf[].label
The Development of a Dual Injection Hydrogen Fueled Engine With High Power and High Efficiency

# publisherOf[].label
Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:2 and AR=1:4) With Smooth Walls

# publisherOf[].label
Fatigue Life Prediction for Short Dents in Petroleum Pipelines

# publisherOf[].label
Experimental Turbulence Analysis of Fuel Bundle with Spacer Grids

# publisherOf[].label
Mass (heat) transfer downstream of blockages with round and elongated holes in a rectangular channel

# publisherOf[].label
Measured Static and Rotordynamic Characteristics of a Smooth-Stator/Grooved-Rotor Liquid Annular Seal

# publisherOf[].label
HEAT TRANSFER ENHANCEMENT IN A RECTANGULAR (AR=3:1) CHANNEL WITH V-SHAPED DIMPLES

# publisherOf[].label
Incipience of Liquid Entrainment From a Stratified Gas-Liquid Region in Multiple Discharging Branches

# publisherOf[].label
On the Fabrication of Defect-Free Nickel-Rich Nickel-Titanium Parts Using Laser Powder Bed Fusion

# publisherOf[].label
REACTOR CAVITY COOLING SYSTEM FACILITY SHAKEDOWN AND RELAP5-3D MODEL VALIDATION

# publisherOf[].label
Effect of Strip-Fin Height On Jet Impingement Heat Transfer in a Rectangular Channel At Two Jet-to-target Surface Spacings

# publisherOf[].label
Periodic-Node Graph-Based Framework for Stochastic Control of Small Aerial Vehicles

# publisherOf[].label
CO and H₂O Time-Histories in Shock-Heated Blends of Methane and Ethane for Assessment of a Chemical Kinetics Model

# publisherOf[].label
Heat Transfer in Rotating Serpentine Coolant Passage with Ribbed Walls at Low Mach Numbers

# publisherOf[].label
Experimental Investigation of Flow Boiling Instability in a Single Horizontal Microtube With and Without Inlet Restriction

# publisherOf[].label
Robotic surface finishing processes: Modeling, control, and experiments

# publisherOf[].label
IMPACT OF URBAN MICROCLIMATE ON AIR CONDITIONING ENERGY CONSUMPTION USING DIFFERENT CONVECTIVE HEAT TRANSFER COEFFICIENT CORRELATIONS AVAILABLE IN BUILDING ENERGY SIMULATION TOOLS

# publisherOf[].label
Adiabatic Processes and Constraints in Thermoelasticity

# publisherOf[].label
Thermal Modeling of Workpiece Temperature in MQL Deep-Hole Drilling

# publisherOf[].label
A Theory for the Development of Conceptual Functional Models for Automation of Manual Processes

# publisherOf[].label
Comparison of Cost Factors in Laser Processing of Materials and Traditional Metal Cutting Processes

# publisherOf[].label
Mechanical Fault Diagnosis Using Numerical Hilbert Analysis

# publisherOf[].label
Characterization of an Apparatus to Study Solid Deposit Formation in Lubricating Oils at High Temperatures

# publisherOf[].label
TURBINE BLADE TIP FILM-COOLING AND HEAT TRANSFER MEASUREMENTS AT HIGH BLOWING RATIOS

# publisherOf[].label
Test Results for Turbulent Annular Seals, Using Smooth Rotors and Helically Grooved Stators

# publisherOf[].label
MEASUREMENT OF GREEN WATER ON A 3D STRUCTURE

# publisherOf[].label
LAMINAR AND TURBULENT FLAME SPEEDS FOR NATURAL GAS/HYDROGEN BLENDS

# publisherOf[].label
DESIGN OPTIMIZATION OF A TWIST COMPLIANT MECHANISM WITH NONLINEAR STIFFNESS

# publisherOf[].label
Residual-Flexibility Corrections for Transient Modal Rotordynamic Models

# publisherOf[].label
Evaporation Effects in Shock-Driven Multiphase Instabilities

# publisherOf[].label
How Designs Differ: Non-Linear Embeddings Illuminate Intrinsic Design Complexity

# publisherOf[].label
On the Cutting of Metals: A Mechanics Viewpoint

# publisherOf[].label
Investigating the Cause of Computational Fluid Dynamics Deficiencies in Accurately Predicting the Efficiency and Performance of High Pressure Turbines: A Combined Experimental and Numerical Study

# publisherOf[].label
COLLISION CONE BASED LANE CHANGING MODEL FOR COLLISION AVOIDANCE

# publisherOf[].label
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing

# publisherOf[].label
AN INVESTIGATION ON CHEVRON PLATE HEAT EXCHANGER FILLED WITH ORGANIC PHASE CHANGE MATERIAL

# publisherOf[].label
Heat Transfer and Pressure Loss in a Two-Pass, Rectangular Channel Featuring a Reduced Cross-Sectional Area After the 180-Degree Tip Turn With Different Turning Vane Configurations

# publisherOf[].label
An Integrated Engineering Agriculture STEM Program

# publisherOf[].label
A Continuum Model for Void Nucleation by Inclusion Debonding

# publisherOf[].label
ORIGAMIBOT-II: AN AMPHIBIOUS ROBOT WITH RECONFIGURABLE ORIGAMI WHEELS FOR LOCOMOTION IN DYNAMIC ENVIRONMENTS

# publisherOf[].label
An Information-Theoretic Metric of System Complexity With Application to Engineering System Design

# publisherOf[].label
Static and Dynamic Characteristics for a Pressure-Dam Bearing

# publisherOf[].label
Methods for Increasing Region 2 Power Capture on a Variable-Speed Wind Turbine

# publisherOf[].label
Dynamic characteristics of elastic bonding in composite laminates: A free vibration study

# publisherOf[].label
Experimental and Numerical Visualization of Droplet-Induced Crown Splashing Dynamics

# publisherOf[].label
Computation of Flow and Heat Transfer in Rotating Two-Pass Square Channels by a Reynolds Stress Model

# publisherOf[].label
Temperature Distribution in Moving Webs Heated by Radiation Panels: Model Development and Experimental Validation

# publisherOf[].label
An Experimental Investigation of the Dynamic Performance of a Vertical-Application Three-Lobe Bearing

# publisherOf[].label
ANALYSIS OF IN-PLANE COMPRESSION AND BENDING OF HONEYCOMBS WITH LAMINATED CELL WALLS

# publisherOf[].label
A Note About the Stability of a String of LTI Systems

# publisherOf[].label
Low-Dimensional Modeling of Transient Two-Phase Flow in Pipelines

# publisherOf[].label
Experimental Investigation of the Clocking Effect in a 1.5-Stage Axial TurbinePart II: Unsteady Results and Boundary Layer Behavior

# publisherOf[].label
VISCOSITY MEASUREMENTS OF NANOFLUIDS AT ELEVATED TEMPERATURES AND PRESSURES

# publisherOf[].label
The Investigation of Gravity-Driven Metal Powder Flow in Coaxial Nozzle for Laser-Aided Direct Metal Deposition Process

# publisherOf[].label
Static and Dynamic Characteristics for a Pressure-Dam Bearing

# publisherOf[].label
Enhancement of Kirschner Wire for Bone Drilling

# publisherOf[].label
Theoretical Prediction of Laminar Burning Speed and Ignition Delay of Gas to Liquid Fuel

# publisherOf[].label
Optimal Trajectory Generation With Probabilistic System Uncertainty Using Polynomial Chaos

# publisherOf[].label
Application of Multivariable Adaptive Control to Automotive Air Conditioning Systems

# publisherOf[].label
Coupled Dynamic Analysis of a Moored Spar in Random Waves and Currents (Time-Domain Versus Frequency-Domain Analysis)

# publisherOf[].label
Effect of Nanoparticles on the Fuel Properties and Spray Performance of Aviation Turbine Fuel

# publisherOf[].label
TRANSONIC FAN PERFORMANCE EVALUATED WITH DIFFERENT SOLUTION LIMITERS

# publisherOf[].label
Thermal-Fluid MEMS Devices: A Decade of Progress and Challenges Ahead

# publisherOf[].label
An Interactive Morphological Matrix Computational Design Tool: A Hybrid of Two Methods

# publisherOf[].label
Comparison Between Unstructured and Structured Meshes With Different Turbulence Models for a High Pressure Turbine Application

# publisherOf[].label
Ignition Delay Time and Laminar Flame Speed Calculations for Natural Gas/Hydrogen Blends at Elevated Pressures

# publisherOf[].label
ROTORDYNAMIC PERFORMANCE OF A NEGATIVE-SWIRL BRAKE FOR A TOOTH-ON-STATOR LABYRINTH SEAL

# publisherOf[].label
Optimum Channel Inclination for Gas Venting Under Countercurrent Flow Limitations

# publisherOf[].label
Prediction of the Onset of Flow Instability in a Single Horizontal Microtube With an Inlet Orifice

# publisherOf[].label
CFD and VH-IVUS Biomechanical Analysis of Coronary Artery Disease With One Year Follow-Up

# publisherOf[].label
THERMOMECHANICAL CHARACTERISTICS OF SILICON WAFER IN RESPONSE TO ULTRAFAST LASER HEATING

# publisherOf[].label
Design of simulation tools for training programs in Lean Manufacturing

# publisherOf[].label
A THERMODYNAMICALLY BASED MODEL OF THE SUPERELASTIC BEHAVIOR OF SHAPE MEMORY ALLOYS USING A DISCRETE PREISACH MODEL

# publisherOf[].label
Effect of Carbon Dioxide on the Laminar Burning Speed of Propane-Air Mixtures

# publisherOf[].label
An Ionic-Polymer-Metal-Composite Electrical Model With a Linear Time-Variant Method

# publisherOf[].label
Data Transfer From BETHSY 9.1B Experiment to Real NPP

# publisherOf[].label
DESIGN AN CHARACTERIZATION OF PIEZO-BASED STEREOCILIA

# publisherOf[].label
Validation of Volterra Series Approach for Modelling Parametric Rolling of Ships

# publisherOf[].label
IMPLEMENTING THE TRANSFORMATION OF DISCRETE PART MANUFACTURING SYSTEMS INTO SMART MANUFACTURING PLATFORMS

# publisherOf[].label
Design Ideation Through Speculative Fiction: Foundational Principles and Exploratory Study

# publisherOf[].label
Robust Adaptive Impedance Control With Application to a Transfemoral Prosthesis and Test Robot

# publisherOf[].label
Simulation of Combustion Recession After End-of-Injection at Diesel Engine Conditions

# publisherOf[].label
Modeling Liquid Film Evaporation in a Wetted Wall Bioaerosol Sampling Cyclone

# publisherOf[].label
Entrance Length Characteristics in Microchannels Using Micro-Particle Image Velocimetry

# publisherOf[].label
Assessment of Current Chemiluminescence Kinetics Models at Engine Conditions

# publisherOf[].label
THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC CHARACTERISTICS OF A SMOOTH ANNULAR GAS SEAL AT ECCENTRIC POSITIONS

# publisherOf[].label
Nonlinear Modeling and Control of Hysteresis in Active Material Systems

# publisherOf[].label
Discussion: Tribological Studies of Ion-Implanted Steel Constituents Using an Oscillating Pin-on-Disk Wear Tester (Wei, R., Wilbur, P. J., Sampath, W. S., Williamson, D. L., Qu, Yi, and Wang, Li, 1990, ASME J. Tribol., 112, pp. 2734)

# publisherOf[].label
Effect of turbulence intensity and periodic unsteady wake flow condition on boundary layer development, separation, and reattachment along the suction surface of a low-pressure turbine blade

# publisherOf[].label
STATIC STIFFNESS MEASUREMENTS FOR A THRUST COLLAR USED IN AN INTEGRALLY GEARED COMPRESSOR

# publisherOf[].label
Dynamic effect of heat shock pretreatment on apoptotic responses to TNF-alpha in liver cells.

# publisherOf[].label
3DGS-Loc: 3D Gaussian Splatting for Map Representation and Visual Localization

# publisherOf[].label
EFFECT OF LOCALIZED BLOCKAGES ON THE FRICTION FACTOR OF A 61-PIN WIRE-WRAPPED BUNDLE

# publisherOf[].label
Cityplot: Visualization of High-Dimensional Design Spaces With Multiple Criteria

# publisherOf[].label
Dynamics of Necking and Fracture in Ductile Porous Materials

# publisherOf[].label
Augmentation of Fixed Gain Controlled Infinite Dimensional Systems With Direct Adaptive Control

# publisherOf[].label
The Effect of Mixture Variation and Initial Temperature on the NH2* Thickness of Spherically Propagating Laminar Ammonia Flames

# publisherOf[].label
Experimental Flow Field Investigations Downstream a Film Cooling Scheme Over a Flat Plate Using the PIV Technique

# publisherOf[].label
Thermodynamic Considerations for Advanced, High Efficiency IC Engines

# publisherOf[].label
EXPERIMENTAL INVESTIGATION OF MICROEXPLOSION PHENOMENA IN EMULSIFIED VEGETABLE OIL-METHANOL BLENDS

# publisherOf[].label
Simulation of Multiliquid-Layer Sloshing With Vessel Motion by Using Moving Particle Semi-Implicit Method

# publisherOf[].label
IDENTIFICATION OF SQUEEZE FILM DAMPER FORCE COEFFICIENTS FROM MULTIPLE-FREQUENCY, NON-CIRCULAR JOURNAL MOTIONS

# publisherOf[].label
NONLINEAR IDENTIFICATION OF MECHANICAL PARAMETERS IN A SQUEEZE FILM DAMPER WITH INTEGRAL MECHANICAL SEAL

# publisherOf[].label
Angled injection - Hydrostatic bearings analysis and comparison to test results

# publisherOf[].label
DESIGN OF A PASSIVELY MORPHING ORNITHOPTER WING USING A NOVEL COMPLIANT SPINE

# publisherOf[].label
Effects of Laser-Powder Alignment on Clad Dimension and Melt Pool Temperature in Directed Energy Deposition

# publisherOf[].label
The Role of CFD in Preliminary Aerospace Design (Keynote)

# publisherOf[].label
A MODAL APPROACH FOR CHAOTIC VIBRATIONS OF A DRILLSTRING

# publisherOf[].label
Computation of Flow and Heat Transfer in Turbine Blade Cooling Passages by Reynolds Stress Turbulence Model (Keynote Paper)

# publisherOf[].label
AN APPROXIMATION ALGORITHM FOR A SHORTEST DUBINS PATH PROBLEM

# publisherOf[].label
A Surface Analytical Study of the Effects of Water and Oxygen on Tribological Behavior of DLC Films

# publisherOf[].label
Applied Tests of Design Skills-Part II: Visual Thinking

# publisherOf[].label
Effect of Reynolds number and periodic unsteady wake flow condition on boundary layer development, separation, and intermittency behavior along the suction surface of a low pressure turbine blade

# publisherOf[].label
Characterization of the Behavior of Confined Laminar Round Jets

# publisherOf[].label
A Mechanics Model for Sensors Imperfectly Bonded to the Skin for Determination of the Young's Moduli of Epidermis and Dermis.

# publisherOf[].label
Upstream Film Cooling on the Contoured Endwall of a Transonic Turbine Vane in an Annular Cascade

# publisherOf[].label
THE NUMERICAL AND EXPERIMENTAL CHARACTERISTICS OF MULTI-MODE DRY-FRICTION WHIP AND WHIRL

# publisherOf[].label
Output Feedback Fractional Integral Sliding Mode Control of Robotic Manipulators

# publisherOf[].label
TIME DOMAIN ANALYSIS OF THE TEMPERATURES IN AN ELECTRICAL AUXILIARY BUILDING ROOM

# publisherOf[].label
COMPUTATIONALLY EFFICIENT ANALYSIS OF SMA SENSORY PARTICLES EMBEDDED IN COMPLEX AEROSTRUCTURES USING A SUBSTRUCTURE APPROACH

# publisherOf[].label
Parametric Adjustments to the Rankine Vortex Wind Model for Gulf of Mexico Hurricanes

# publisherOf[].label
Material Model for Creep-Assisted Microcracking Applied to S2 Sea Ice

# publisherOf[].label
IMPROVEMENT IN LEAN HOMOGENOUS SPARK-IGNITION COMBUSTION WITH PULSED ENERGY SPARK PLUG

# publisherOf[].label
Parallel Between Rankine and Combined-Cycle Power Plants Configurations Burning Blast Furnace Gas

# publisherOf[].label
Powder-Based Additive Manufacturing of Li-Ion Batteries and Micropowder Mixing Characteristics

# publisherOf[].label
MODELING OF SHAPE MEMORY ALLOY WIRE MESHES USING EFFECTIVE LAMINA PROPERTIES FOR IMPROVED ANALYSIS EFFICIENCY

# publisherOf[].label
Design of State-Space-Based Control Algorithms for Wind Turbine Speed Regulation

# publisherOf[].label
Optimization of Film Cooling Holes on the Suction Surface of a High Pressure Turbine Blade

# publisherOf[].label
Multi-Regional Multi-Objective Optimization of an Algal Biofuel Polygeneration Supply Chain with Fuzzy Mathematical Programming

# publisherOf[].label
Evaporation and Condensation Heat Transfer and Pressure Drop in Horizontal, 12.7-mm Microfin Tubes With Refrigerant 22

# publisherOf[].label
HARNESSING CHAOTIC FLOW EFFECTS IN MICROSCALE NATURAL CONVECTION TO ACHIEVE ACCELERATED BIOCHEMISTRY

# publisherOf[].label
The Effect of a Fractal Profile Tolerance on the Dynamic Performance of Cams

# publisherOf[].label
Design and Construction of a Novel Tubular Linear Motor With Controller for Robotics Applications

# publisherOf[].label
PLANE STRAIN SLIDING CONTACT BETWEEN A RIGID CYLINDER AND A PSEUDOELASTIC SHAPE MEMORY ALLOY HALF-SPACE

# publisherOf[].label
Urban Scale Cooling Load Prediction of High-Rise Buildings in a Hot and Arid Climate

# publisherOf[].label
Observer Design for a Well-bore Drilling System with Down-hole Measurement Feedback

# publisherOf[].label
AN ASSESSMENT OF THE THERMODYNAMICS ASSOCIATED WITH HIGH-EFFICIENCY ENGINES

# publisherOf[].label
MEASUREMENT OF DETAILED HEAT TRANSFER COEFFICIENT AND FILM COOLING EFFECTIVENESS DISTRIBUTIONS USING PSP AND TSP

# publisherOf[].label
SUPPRESSION OF IRREGULAR FREQUENCY IN MULTI-BODY PROBLEM AND FREE-SURFACE SINGULARITY TREATMENT

# publisherOf[].label
CONTROL OF FRICTION-INDUCED INSTABILITY IN SIMULTANEOUS TIME-FREQUENCY DOMAIN

# publisherOf[].label
On the characteristics of bifurcation and nonlinear dynamic response

# publisherOf[].label
A METHODOLOGY FOR EXAMINING THE ROLE OF ADAPTIVE EXPERTISE ON CAD MODELING

# publisherOf[].label
Experimental Analysis of Self-Folding SMA-Based Sheet Design for Simulation Validation

# publisherOf[].label
A NOVEL MAGNETICALLY-LEVITATED FLYWHEEL ENERGY STORAGE ALTERNATIVE TO LITHIUM-ION BATTERY PACKS FOR OILFIELD SERVICE

# publisherOf[].label
Energy Management Strategy for a Parallel Hybrid Vehicle

# publisherOf[].label
NUMERICAL INVESTIGATION OF FLOW AND HEAT TRANSFER CHARACTERISTICS FOR ATTACHED AND SEPARATED LOW-PR FLOWS

# publisherOf[].label
THE MEASURED ENERGY IMPACT OF INFILTRATION IN A TEST CELL

# publisherOf[].label
Unsteady Simulation of Film Cooling Flow From an Inclined Cylindrical Jet

# publisherOf[].label
AN ANNULAR GAS SEAL ANALYSIS USING EMPIRICAL ENTRANCE AND EXIT REGION FRICTION FACTORS

# publisherOf[].label
One Explanation for Two-Times Running Speed Response Due to Misalignment in Rotors Connected by Flexible Couplings

# publisherOf[].label
A GENETIC ALGORITHM APPROACH FOR TECHNOLOGY CHARACTERIZATION

# publisherOf[].label
Nanofiber Cathode Catalyst Layer Model for a Proton Exchange Membrane Fuel Cell

# publisherOf[].label
Experimental Observations on the Dynamic Response of Phase Change Materials

# publisherOf[].label
METHODS FOR SUPPORTING BIOINSPIRED DESIGN

# publisherOf[].label
Prediction of film cooling and heat transfer on a rotating blade platform with stator-rotor purge and discrete film-hole flows in a 1-1/2 turbine stage

# publisherOf[].label
ON THE TEMPORAL NETWORK ANALYSIS WITH LINK PREDICTION

# publisherOf[].label
Accurate Interpretation of Magnetic Shape Memory Alloy Experiments Utilizing Coupled Magnetostatic Analysis

# publisherOf[].label
Effect of surface roughness on single cryogen droplet spreading

# publisherOf[].label
MODELING WEB TENSION DYNAMICS CONSIDERING THERMAL AND VISCOELASTIC EFFECTS: SIMULATIONS AND EXPERIMENTS

# publisherOf[].label
Effects of Periodic Unsteady Wake Flow and Pressure Gradient on Boundary Layer Transition Along the Concave Surface of a Curved Plate

# publisherOf[].label
Molecular Dynamics Simulations of Thermal Interactions in Nanoscale Liquid Channels

# publisherOf[].label
INTERNAL POROSITY DETECTION IN ADDITIVELY MANUFACTURED PARTS VIA ELECTROMECHANICAL IMPEDANCE MEASUREMENTS

# publisherOf[].label
THE INTERACTION OF TSUNAMIS WITH OCEAN SWELL: AN EXPERIMENTAL STUDY

# publisherOf[].label
High Velocity Oblique Impact and Coefficient of Restitution for Head Disk Interface Operational Shock

# publisherOf[].label
The Role of Shape and Heart Rate on the Performance of the Left Ventricle.

# publisherOf[].label
Micro-machined temperature sensor arrays for studying micro-scale features in film boiling

# publisherOf[].label
ACTIVE LENGTH CONTROL OF SHAPE MEMORY ALLOY WIRES VIA REINFORCEMENT LEARNING

# publisherOf[].label
Thermo-mechanical analysis of composites under combined conduction heating and large deflection bending

# publisherOf[].label
A Customer Needs Motivated Conceptual Design Methodology for Product Portfolios

# publisherOf[].label
Thermal Performance of Microencapsulated Phase Change Material Slurry in a Coil Heat Exchanger

# publisherOf[].label
On the Adaptive Control of Mechanical Systems With Time-Varying Parameters and Disturbances

# publisherOf[].label
On the Use of Micro Heat Pipes as an Integral Part of Semiconductor Devices

# publisherOf[].label
Adaptive State Feedback to Maximize the Power Capture and Reduce the Tower Motion of Wind Turbine in Partial Loading Operation

# publisherOf[].label
Identifying and Leveraging Promising Design Heuristics for Multi-Objective Combinatorial Design Optimization

# publisherOf[].label
Thermal Analysis for Cryosurgery of Nodular Basal Cell Carcinoma

# publisherOf[].label
TURNING DYNAMICS PART 2: STABILITY AT HIGH SPEED

# publisherOf[].label
A micromechanics model for the thermal conductivity of nanotube-polymer nanocomposites

# publisherOf[].label
Deformation of Pyramidal PDMS Stamps During Microcontact Printing

# publisherOf[].label
An Engineering-to-Biology Thesaurus for Engineering Design

# publisherOf[].label
EFFECTS OF EDEMAGENIC STRESS ON LYMPH TRANSPORT IN THE RAT MESENTERY

# publisherOf[].label
Transport and Interfacial Phenomena in Nanoscale Confined Laser Crystallization

# publisherOf[].label
Instantaneous Wind-Tunnel Model Vibration Measurements Using a Kalman Filtering Approach

# publisherOf[].label
A new approach for changing structural properties of a membrane mirror strip for adaptive optics applications

# publisherOf[].label
A Study for Rotordynamic and Leakage Characteristics of a Long-Honeycomb Seal With Two-Phase, Mainly Air Mixtures

# publisherOf[].label
Generation and Optimization of Traveling Vibrating Waves in Self-Assembling Swimming Smart Boxes

# publisherOf[].label
High-Definition Metrology Enabled Surface Variation Control by Cutting Load Balancing

# publisherOf[].label
INFLUENCE OF COOLANT DENSITY ON TURBINE PLATFORM FILM-COOLING WITH STATOR-ROTOR PURGE FLOW AND COMPOUND-ANGLE HOLES

# publisherOf[].label
Generalizability of Convolutional Encoder-Decoder Networks for Aerodynamic Flow-Field Prediction Across Geometric and Physical-Fluidic Variations

# publisherOf[].label
ROBOTIC SURFACE FINISHING OF CURVED SURFACES: REAL-TIME IDENTIFICATION OF SURFACE PROFILE AND CONTROL

# publisherOf[].label
An Approach for the Construction of Entropy Measure and Energy Map in Machine Fault Diagnosis

# publisherOf[].label
Film cooling and heat transfer on two cutback trailing edge models with internal perforated blockages

# publisherOf[].label
Modeling of Deformation-Accelerated Breakdown of Polylactic Acid Biodegradable Stents

# publisherOf[].label
A Comparative Study of Mass Based Vibration Dampers

# publisherOf[].label
A Simple Treatment of Constraint Forces and Constraint Moments in the Dynamics of Rigid Bodies

# publisherOf[].label
APPLICATION OF SEMI-EMPIRICAL PROBABILITY DISTRIBUTIONS IN WAVE-STRUCTURE INTERACTION PROBLEMS

# publisherOf[].label
Comparisons of Global Heat Transfer Correlations for Conventional and High Efficiency Reciprocating Engines

# publisherOf[].label
Laminar Flame Speed Measurements of Kerosene-Based Fuels Accounting for Uncertainties in Mixture Average Molecular Weight

# publisherOf[].label
MODELING OF HYBRID SHAPE MEMORY ALLOY COMPOSITES INCORPORATING MAX PHASE CERAMICS

# publisherOf[].label
A COMPARATIVE STUDY OF INTERFACE SCHEMES IN THE IMMERSED BOUNDARY METHOD FOR A MOVING SOLID BOUNDARY PROBLEM USING THE LATTICE BOLTZMANN METHOD

# publisherOf[].label
Effect of Density Ratio on Flat Plate Film Cooling With Shaped Holes Using PSP

# publisherOf[].label
APPLICATION OF A NEW SEMI-ACTIVE CONTROL STRATEGY TO DYNAMIC RESPONSE CONTROL OF AN OFFSHORE PLATFORM USING MR DAMPERS

# publisherOf[].label
Development of Planar Microfluidic Systems Using Conventional and Low Temperature Assembling Schemes for Components

# publisherOf[].label
The effect of static and dynamic loading on degradation of PLLA stent fibers.

# publisherOf[].label
Surface Structure Enhanced Microchannel Flow Boiling

# publisherOf[].label
Sensitivity of Steady State Intermittent Cutting Motion to Work-Piece Characteristics

# publisherOf[].label
Control of Down-Hole Drilling Process Using a Computationally Efficient Dynamic Programming Method

# publisherOf[].label
The Effect of Charge Shape on Partially Confined Detonations

# publisherOf[].label
PREDICTIVE MODEL FOR TWO-PHASE FLOW PERFORMANCE OF MIXED FLOW PUMPS

# publisherOf[].label
The Influence of Lattice Misfit on the Atomic Structures and Defect Energetics of Face Centered CubicBody Centered Cubic Interfaces

# publisherOf[].label
ANALYSIS OF PRESSURE FIELD ON WIRE-WRAPPED PIN BUNDLE SURFACE FOR CONCERNS OF FSI

# publisherOf[].label
Material characterization of SMA actuators under nonproportional thermomechanical loading

# publisherOf[].label
A NUMERICAL STUDY OF UNSTEADY LAMINAR FLOW AND HEAT TRANSFER THROUGH AN ARRAY OF ROTATING RECTANGULAR MICROCHANNELS

# publisherOf[].label
A STACKELBERG GAME THEORETIC DRIVER MODEL FOR MERGING

# publisherOf[].label
Unsteady Interaction Between a Transonic Turbine Stage and Downstream Components

# publisherOf[].label
Efficient Parametric Optimization for Expensive Single Objective Problems

# publisherOf[].label
Reduction of Nitrogen Oxides in Engine Exhaust Gases by the Addition of Cyanuric Acid

# publisherOf[].label
VOID GROWTH AND LOCAL NECKING IN BIAXIALLY STRETCHED SHEETS

# publisherOf[].label
Resilient Circularity in Manufacturing: Synergies Between Circular Economy and Reconfigurable Manufacturing

# publisherOf[].label
Predicting the Fatigue Life of Long Dents in Petroleum Pipelines

# publisherOf[].label
Developing a Supply Chain Modeling Approach to Facilitate Ecology-Inspired Design for Sustainability and Resilience

# publisherOf[].label
A NONLINEAR TENSION CONTROL SCHEME FOR WEB TRANSPORT THROUGH HEATING PROCESSES

# publisherOf[].label
Experimental Study of Thermal Performance of Nanofluids During Flow in Microchannels Using Surface Temperature-Nano-Sensors

# publisherOf[].label
Rotordynamic Force Coefficients for Three Types of Annular Gas Seals With Inlet Preswirl and High Differential Pressure Ratio

# publisherOf[].label
MAGNETO-MECHANICAL FINITE ELEMENT ANALYSIS OF MAGNETIC SHAPE MEMORY ALLOYS WITH BODY FORCE AND BODY COUPLE

# publisherOf[].label
Design and Control of a Compact Light-Weight Planar Positioner Moving Over a Concentrated-Field Magnet Matrix

# publisherOf[].label
Real-time strip thickness control in metal peeling

# publisherOf[].label
Reducing the Search Space for Global Minimum: A Focused Regions Identification Method for Least Squares Parameter Estimation in Nonlinear Models

# publisherOf[].label
Local Heat Transfer Characteristics of Flows Induced by Multiple Piezoelectrically Actuated Vibrating Cantilevers

# publisherOf[].label
Second-Order Low-Frequency Wave Forces on a SPM Offloading Tanker in Shallow Water

# publisherOf[].label
Use of calibrated HVAC system models to optimize system operation

# publisherOf[].label
On the Fracture Toughness of Pseudoelastic Shape Memory Alloys

# publisherOf[].label
A DETECTION AND WARNING SYSTEM FOR UNINTENDED ACCELERATION

# publisherOf[].label
On the Volumetric Assessment of Tool Wear in Machining Inserts With Complex GeometriesPart II: Experimental Investigation and Validation on Ti-6Al-4V

# publisherOf[].label
Parametric study of surface finish in end milling using robust design techniques

# publisherOf[].label
TOWARD MATERIAL PARAMETERS FOR MODELING DEVICES MADE FROM AN EPDXY-BASED SHAPE MEMORY POLYMER

# publisherOf[].label
A device to study the effects of stretch gradients on cell behavior.

# publisherOf[].label
Chip Morphology and Chip Formation Mechanisms During Machining of ECAE-Processed Titanium

# publisherOf[].label
Experiences on Project-Based-Classes for Turbomachine Design in an Aerospace Engineering Undergraduate Program

# publisherOf[].label
TURBULENT HEAT-TRANSFER AND FRICTION IN A SQUARE CHANNEL WITH DISCRETE RIB TURBULATORS

# publisherOf[].label
Spatially Dependent Transfer Functions for Web Lateral Dynamics in Roll-to-Roll Manufacturing

# publisherOf[].label
AUTONOMOUS CONTROL STRATEGIES FOR VHTR-BASED SYSTEMS FOR HYDROGEN PRODUCTION

# publisherOf[].label
Identification of force coefficients in a squeeze film damper with a mechanical end seal-centered circular orbit tests

# publisherOf[].label
Assessment of RANS-Based Turbulence Models for Buoyancy-Influenced Forced Convection on a Heated Vertical Surface

# publisherOf[].label
A Signal Grammar to Guide Functional Modeling of Electromechanical Products

# publisherOf[].label
LEADING EDGE IMPINGEMENT WITH RACETRACK SHAPED JETS AND VARYING INLET SUPPLY CONDITIONS

# publisherOf[].label
On the Relationship Between Fuel Injection Pressure and Two-Stage Ignition Behavior of Low Temperature Diesel Combustion

# publisherOf[].label
On failure mechanisms in flip chip assembly - Part 2: Optimal underfill and interconnecting materials

# publisherOf[].label
ROTORDYNAMIC COEFFICIENTS AND LEAKAGE FLOW OF CIRCUMFERENTIALLY GROOVED LIQUID-SEALS

# publisherOf[].label
Parametric sensitivity analysis and model tuning applied to vapor compression systems

# publisherOf[].label
Characteristics of vortex shedding process induced by a solitary wave propagating over a submerged obstacle

# publisherOf[].label
Adaptive Motion and Force Control of Robots Performing a Complete Task

# publisherOf[].label
Numerical Investigation of the Effect of Purge Flow on Aerodynamic Performance and Film Cooling Effectiveness on a Rotating Turbine with Non-Axisymmetric Endwall Contouring

# publisherOf[].label
MORPHING AIRFOIL DESIGN VIA L-SYSTEM GENERATED TOPOLOGY OPTIMIZATION

# publisherOf[].label
Active Vibration Control of Rotating Machinery With a Hybrid Piezo-Hydraulic Actuator System

# publisherOf[].label
Combining and contacting of two rough surfaces with asymmetric distribution of asperity heights

# publisherOf[].label
Comparative Study Between Structured and Unstructured Meshes Applied in Turbopumpu2019s Hydraulic Turbine

# publisherOf[].label
Autonomous Satellite Servicing Infrastructure for In-Space Assembly and Manufacturing

# publisherOf[].label
Mechanical and Microstructural Properties of Selective Laser Melted 17-4 PH Stainless Steel

# publisherOf[].label
Kinesthetic Perceptual Symmetry in Bi-Manual Interactions: An Exploratory Study

# publisherOf[].label
The Effect of Rate Dependence on Localization of Deformation and Failure in Softening Solids

# publisherOf[].label
An Experimental Investigation of Film Cooling Performance of Louver Scheme

# publisherOf[].label
THE IMPACT OF HOLE DEPTH ON THE ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF HOLE-PATTERN-STATOR GAS ANNULAR SEALS

# publisherOf[].label
SENSITIVITY ANALYSIS OF THE RESPONSE OF PWR CONTAINMENT DURING A LOSS OF COOLANT ACCIDENT USING RELAP5-3D AND MELCOR

# publisherOf[].label
Sequence-specific role of water in spontaneous local unwinding of collagen

# publisherOf[].label
Formalizing and Exploring the Transferability of Inclusive Design Rules

# publisherOf[].label
COMPOSING TRADEOFF MODELS FOR MULTI-ATTRIBUTE SYSTEM-LEVEL DECISION MAKING

# publisherOf[].label
FRACTIONAL-FREQUENCY ROTOR MOTION DUE TO NONSYMMETRIC CLEARANCE EFFECTS

# publisherOf[].label
Informing Early Design via Crowd-Based Co-Creation

# publisherOf[].label
DYNAMIC CHARACTERISTICS OF TEHD TILT PAD JOURNAL BEARING SIMULATION INCLUDING MULTIPLE-MODE PAD FLEXIBILITY MODEL

# publisherOf[].label
A New Contact Force Model for Low Coefficient of Restitution Impact

# publisherOf[].label
Combined Effects of Freestream Pressure Gradient and Density Ratio on the Film Cooling Effectiveness of Round and Shaped Holes on a Flat Plate

# publisherOf[].label
Boric Acid as an Additive for Core-Drilling of Alumina

# publisherOf[].label
Effect of Squealer Geometry Arrangement on Gas Turbine Blade Tip Heat Transfer

# publisherOf[].label
Three Dimensional Flow Around a Biomimetic Unbounded Flapping Cantilever

# publisherOf[].label
AN ORIGAMI-INSPIRED, SMA ACTUATED LIFTING STRUCTURE

# publisherOf[].label
ANALYSIS AND TESTING FOR ROTORDYNAMIC COEFFICIENTS OF TURBULENT ANNULAR SEALS WITH DIFFERENT, DIRECTIONALLY-HOMOGENEOUS SURFACE-ROUGHNESS TREATMENT FOR ROTOR AND STATOR ELEMENTS

# publisherOf[].label
A Collaborative Decision Model for Low Energy Building Design Optimization

# publisherOf[].label
Variance-Based Sensitivity Analysis to Support Simulation-Based Design Under Uncertainty

# publisherOf[].label
Comparative Tribological Behavior of TiN-, CrN-, ZrN-, and MoN -Cu Based Nanocomposite Coatings

# publisherOf[].label
Biologically Meaningful Keywords for Functional Terms of the Functional Basis

# publisherOf[].label
CHARACTERIZING THE EFFECT OF DOMAIN DISTANCE IN DESIGN-BY-ANALOGY

# publisherOf[].label
TECHNOLOGY CHARACTERIZATION MODELS AND THEIR USE IN DESIGNING COMPLEX SYSTEMS

# publisherOf[].label
Buckling of a thin circular plate loaded by in-plane gravity

# publisherOf[].label
TRU-FUELED VHTRS FOR APPLICATIONS REQUIRING AN EXTENDED OPERATION WITH MINIMIZED CONTROL AND NO REFUELING

# publisherOf[].label
Total Internal Reflection (TIR) Lens Design for Surface Mount Techonology (SMT) LED Application

# publisherOf[].label
Viscoelastic Models for Ligaments and Tendons

# publisherOf[].label
Periodic Disturbance Accommodating Control for Speed Regulation of Wind Turbines

# publisherOf[].label
Thermomechanical Characterization of SMA Actuators Under Cyclic Loading

# publisherOf[].label
Particulate Release From Nanoparticle-Loaded Shape Memory Polymer Foams.

# publisherOf[].label
Multi-Degree-of-Freedom Precision Position Sensing and Motion Control Using Two-Axis Hall-Effect Sensors

# publisherOf[].label
Elastic contact model accounting for both asperity and substrate compliance with application to patterned media

# publisherOf[].label
Control of Rotary Steerable Toolface in Directional Drilling

# publisherOf[].label
THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC COEFFICIENTS OF ANNULAR GAS SEALS .2. CONSTANT-CLEARANCE AND CONVERGENT-TAPERED GEOMETRY

# publisherOf[].label
Identification of force coefficients in a squeeze film damper with a mechanical seal. Part I - Unidirectional load tests

# publisherOf[].label
Identification of Plastic Properties From Conical Indentation Using a Bayesian-Type Statistical Approach

# publisherOf[].label
Empirical Studies of Designer Thinking: Past, Present, and Future

# publisherOf[].label
A Dynamic Stochastic Model of Frequency-Dependent Stress Fiber Alignment Induced by Cyclic Stretch

# publisherOf[].label
Effects of High Frequency Droplet Train Impingement on Crown Propagation Dynamics and Heat Transfer

# publisherOf[].label
Lateral Equilibrium Position Analysis Program With Applications to Electric Submersible Pumps

# publisherOf[].label
Fully nonlinear multidirectional waves by a 3-D viscous numerical wave tank

# publisherOf[].label
Performance Study of a 1 MW Gas Turbine Using Variable Geometry Compressor and Turbine Blade Cooling

# publisherOf[].label
Numerical Simulation of a Novel Jet-Impingement Micro Heat Sink With Cross Flow Under Non Uniform Heating Condition

# publisherOf[].label
PARAMETRIC OPTIMIZATION OF SMA TORSIONAL ACTUATORS FOR AIRCRAFT MORPHING APPLICATIONS

# publisherOf[].label
Full-Scale Turbine Vane Endwall Film-Cooling Effectiveness Distribution Using Pressure-Sensitive Paint Technique

# publisherOf[].label
High-Fidelity Calculation of Effective Thermal Response of Composite Media With Heat Generation Source

# publisherOf[].label
Grain Growth Following Recrystallization in Reactive Spray Deposited Al-Mg-Mn Alloys

# publisherOf[].label
Intelligent Cruise Control Systems and Traffic Flow Behavior

# publisherOf[].label
INFLUENCE OF COOLANT DENSITY ON TURBINE BLADE FILM-COOLING WITH COMPOUND-ANGLE SHAPED HOLES

# publisherOf[].label
An extended three-control-volume theory for circumferentially-grooved liquid seals

# publisherOf[].label
Cohesive Finite Element Based Modeling of Damage in Composite Materials

# publisherOf[].label
A Thermohydrodynamic Analysis of Journal Bearings Lubricated by a Non-Newtonian Fluid

# publisherOf[].label
Influence of process parameters on the ironing of deep-drawn cups

# publisherOf[].label
ITPE TECHNIQUE APPLICATIONS TO TIME-VARYING 3-DIMENSIONAL GROUND-COUPLING PROBLEMS

# publisherOf[].label
An Algorithm for Multi-Objective Efficient Parametric Optimization

# publisherOf[].label
REINFORCED CONCRETE BARRIER MODELING IN-SERIES IMPACTS IN LS-DYNA

# publisherOf[].label
LARGE EDDY SIMULATION OF A HELICAL COIL STEAM GENERATOR TEST SECTION

# publisherOf[].label
Smart Control of Springback in Stretch Bending of a Rectangular Tube by an Artificial Neural Network

# publisherOf[].label
Capturing Empirically Derived Design Knowledge for Creating Conceptual Design Configurations

# publisherOf[].label
Comparison of Model Predictions and Performance Test Data for a Prototype Thermal Energy Storage Module

# publisherOf[].label
Static and Rotordynamic Characteristics for a New Hole-Pattern Annular Gas Seal Design Incorporating Larger Diameter Holes

# publisherOf[].label
SYNTHESIS OF DIGITAL PID CONTROLLERS FOR DISCRETE-TIME SYSTEMS WITH GUARANTEED NON-OVERSHOOTING TRANSIENT RESPONSE

# publisherOf[].label
IMPROVING TILTING-PAD JOURNAL BEARING PREDICTIONS: PART II - COMPARISON OF MEASURED AND PREDICTED ROTOR-PAD TRANSFER FUNCTIONS FOR A ROCKER-PIVOT TILTING-PAD JOURNAL BEARING

# publisherOf[].label
A Higher-Order Theory for Open and Closed Curved Rods and Tubes Using a Novel Curvilinear Cylindrical Coordinate System

# publisherOf[].label
The Numerical Investigation of an Interdigital Micromixer With the Circular-Sector Obstacles

# publisherOf[].label
Static and Dynamic Coefficient Measurements for a Thrust Collar Used in an Integrally Geared Compressor

# publisherOf[].label
COMPARISON OF CRYSTAL PLASTICITY AND ISOTROPIC HARDENING PREDICTIONS FOR METAL-MATRIX COMPOSITES

# publisherOf[].label
A STUDY OF ENGINEERING DESIGN PROJECT COMPLEXITY AND RISK INDICATORS

# publisherOf[].label
DYNAMIC FORCE RESPONSE OF AN OPEN-ENDED SQUEEZE FILM DAMPER

# publisherOf[].label
A Review of Journal Bearing Thermal Effects on Rotordynamic Response

# publisherOf[].label
Large Eddy Simulation of the Flow Behavior in a Simplified Helical Coil Steam Generator

# publisherOf[].label
Adaptive Feedback Linearization for the Control of a Typical Wing Section With Structural Nonlinearity

# publisherOf[].label
DESIGNING A MORPHABLE PARABOLIC REFLECTOR ANTENNA USING ORIGAMI-INSPIRED DISCRETIZATION AND EFFICIENT GLOBAL OPTIMIZATION

# publisherOf[].label
Adapting ADA Architectural Design Knowledge for Universal Product Design Using Association Rule Mining: A Function Based Approach

# publisherOf[].label
Static Performance Characteristics and Rotordynamic Coefficients for a Four-Pad Ball-in-Socket Tilting Pad Journal Bearing

# publisherOf[].label
Design and validation of a reduced test matrix for the autoignition of gas turbine fuel blends

# publisherOf[].label
THE ENERGY IMPACT OF AIR LEAKAGE THROUGH INSULATED WALLS

# publisherOf[].label
ACOUSTOELASTIC-BASED STRESS MEASUREMENT UTILIZING LOW FREQUENCY FLEXURAL WAVES

# publisherOf[].label
SHELLSIDE VACUUM CONDENSATION WITH A NONCONDENSABLE GAS

# publisherOf[].label
EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS OF PSEUDOCRITICAL CARBON DIOXIDE IN A CIRCULAR HORIZONTAL TUBE

# publisherOf[].label
THE USE OF VEHICLE DYNAMIC RESPONSE TO ESTIMATE ROAD PROFILE INPUT IN TIME DOMAIN

# publisherOf[].label
PRODUCT PERFORMANCE EVOLUTION PREDICTION BY LOTKA-VOLTERRA EQUATIONS

# publisherOf[].label
A PERFORMANCE COMPARISON OF EMG CLASSIFICATION METHODS FOR HAND AND FINGER MOTION

# publisherOf[].label
Implementation of magnetic suspension control with FPGA

# publisherOf[].label
Thermodynamic Considerations Related to Knock: Results from an Engine Cycle Simulation

# publisherOf[].label
DYNAMICS OF POOL BOILING ON PLAIN AND NANOTUBE COATED SILICON SURFACES

# publisherOf[].label
Adaptive Control of Nonminimum Phase Systems Using Sensor Blending With Application to Launch Vehicle Control

# publisherOf[].label
Enhanced Specific Heat Capacity of Nanomaterials Synthesized by Dispersing Silica Nanoparticles in Eutectic Mixtures

# publisherOf[].label
A Nonlinear Rotordynamics Model for Automotive Turbochargers Coupled to a Physical Model for A (Semi) Floating Ring Bearing System

# publisherOf[].label
ASSESSMENT OF POWER CONSUMPTION OF AN ELECTRODYNAMIC DUST SHIELD TO CLEAN SOLAR PANELS

# publisherOf[].label
A CONSTITUTIVE MODEL FOR BIMODULAR MATERIALS WITH AN APPLICATION TO PLATE BENDING

# publisherOf[].label
A COMPREHENSIVE REVIEW OF 4D FLOW MRI AND CFD IN CARDIOVASCULAR AND CONGENITAL HEART DISEASE

# publisherOf[].label
Numerical Analysis of Hydrodynamic Performance of Backward Bent Duct Buoy (BBDB)

# publisherOf[].label
Commutational output feedback control for disk drive ramp loading

# publisherOf[].label
Understanding Deformation on Machined Surfaces

# publisherOf[].label
Understanding friction factor behavior in liquid annular seals with deliberately roughened surfaces, roughness geometric characteristics defining flow resistance

# publisherOf[].label
A Study on the Leakage and Rotordynamic Performance of a Long Labyrinth Seal Under Mainly Air Conditions

# publisherOf[].label
PRESSURE OSCILLATION IN THE LEAKAGE ANNULUS BETWEEN A SHROUDED IMPELLER AND ITS HOUSING DUE TO IMPELLER-DISCHARGE-PRESSURE DISTURBANCES

# publisherOf[].label
Effects of Microstructure of Quasicrystal Alloys on Their Mechanical and Tribological Performance

# publisherOf[].label
HIGH SPEED NON-LINEAR MICRO-MILLING DYNAMICS

# publisherOf[].label
Nonlinear Identification of MIMO Smart Structures

# publisherOf[].label
VEHICLE PROPULSION BY SOLID STATE MOTION

# publisherOf[].label
FUNdesign: A Function-Based Method for Addressing Uncertainty During the Design of Engineering Systems  Representations and Knowledge Storage

# publisherOf[].label
CARBON MONOXIDE EMISSION MEASUREMENTS FROM A SUPERCRITICAL CO₂ COMBUSTOR RIG USING A MID-INFRARED LASER ABSORPTION DIAGNOSTIC

# publisherOf[].label
Heat Transfer in Rotating Serpentine Coolant Passage With Ribbed Walls at Low Mach Numbers

# publisherOf[].label
Pointing Tasks Using Spatial Audio on Smartphones for People With Vision Impairments

# publisherOf[].label
System Identification of Nonlinear Coupled Ship/Offshore Platform Dynamics in Beam Seas

# publisherOf[].label
Optical Characteristics of Nanoparticle Sintering and Coalescence for Electronics Fabrication

# publisherOf[].label
CALCIUM REGULATION IN LYMPHATIC ENDOTHELIAL CELLS UNDER FLOW

# publisherOf[].label
Power Cycle Assessment of Nuclear Systems, Providing Energy Storage for Low Carbon Grids

# publisherOf[].label
A Preliminary Study of the MSFR Dynamics

# publisherOf[].label
Heat Transfer Coefficients on the Squealer Tip and Near Tip Regions of a Gas Turbine Blade With Single or Double Squealer

# publisherOf[].label
Nanoindentation Studies of the Effects of Ion Irradiation on the Near Surface Mechanical Response of Annealed Ti₄₀Cu₃₂Pd₁₄Zr₁₀Sn₂Si₂ Metallic Glass Ribbons

# publisherOf[].label
Magnetic Bearing Rotordynamic System Optimization Using Multi-Objective Genetic Algorithms

# publisherOf[].label
Effect of Inlet Restriction on Flow Boiling Heat Transfer in a Horizontal Microtube

# publisherOf[].label
Effect of Density Ratio on Film-Cooling Effectiveness Distribution and its Uniformity for Several Hole Geometries on a Flat Plate

# publisherOf[].label
DEVELOPMENT OF DIAGNOSTIC ALGORITHMS FOR AN AIR BRAKE SYSTEM THEORY AND IMPLEMENTATION

# publisherOf[].label
Heat Transfer in Rotating, Trailing Edge, Converging Channels With Full and Partial Height Strip-Fins

# publisherOf[].label
Development of a Novel Modular Robot for Vertical Pipeline Climbing

# publisherOf[].label
COMPARISON OF THREE-DIMENSIONAL SHAPE MEMORY ALLOY CONSTITUTIVE MODELS: FINITE ELEMENT ANALYSIS OF ACTUATION AND SUPERELASTIC RESPONSES OF A SHAPE MEMORY ALLOY TUBE

# publisherOf[].label
Numerical Finger Kinematic Models Derived From Virtual Grasping of Various Cylindrical Objects With the Family of Conic Sections

# publisherOf[].label
Experimental Investigation of the Subchannel Axial Pressure Drop and Hydraulic Characteristics of a 61-Pin Wire Wrapped Rod Bundle

# publisherOf[].label
EXPERIMENTAL VALIDATION OF NEO-HOOKEAN FIBER REINFORCED ELASTIC SOLIDS

# publisherOf[].label
A NEW APPROACH TO MICROBUCKLING OF FIBROUS COMPOSITES

# publisherOf[].label
Case Study for Energy-Efficiency of Liquid-Cooled Data Centers

# publisherOf[].label
Investigation of High-Pressure Ignition Phenomena of CO2-Diluted Syngas in Shock Tubes

# publisherOf[].label
Numerical modeling of the tissue freeze-thaw cycle during cutaneous cryosurgery using liquid nitrogen spray

# publisherOf[].label
Aggregation of a Class of Large-Scale, Interconnected, Nonlinear Dynamical Systems

# publisherOf[].label
A COMPREHENSIVE ALGORITHM FOR THE ANALYSIS OF ECG WAVEFORMS

# publisherOf[].label
BRAIN LIMBIC SYSTEM BASED ROBUST CONTROL FOR LANE CHANGE MANEUVER

# publisherOf[].label
Optimized Film Cooling Flow on a Contoured Endwall Within a Transonic Annular Cascade

# publisherOf[].label
Application of the Proper Orthogonal Decomposition Method for Cracked Rotors

# publisherOf[].label
Eigensolution Reanalysis of Rotor Dynamic Systems by the Generalized Receptance Method

# publisherOf[].label
Silicone-Based Tissue-Mimicking Phantom for Needle Insertion Simulation

# publisherOf[].label
Bileaflet Prosthetic Heart Valve Disease: Numerical Approach Using 3-D Fluid-Structure Interaction Model With Realistic Aortic Root

# publisherOf[].label
CFD INVESTIGATION OF WIRE-WRAPPED FUEL ROD BUNDLE INNER SUBCHANNEL BEHAVIOR AND DEPENDENCY ON BUNDLE SIZE

# publisherOf[].label
Numerical Simulation of a Novel Passive Micromixer With Curved Channel and Slanted Grooves

# publisherOf[].label
Nonlinear Time-Domain Simulation of the Heaving-Buoy Type Wave Energy Converter by Using Three-Dimensional Potential Numerical Wave Tank Under Irregular Wave Conditions

# publisherOf[].label
Control of Transition in Supersonic Boundary Layers: Experiments and Computations (Keynote)

# publisherOf[].label
Vertical Riser VIV Simulation in Uniform Current

# publisherOf[].label
Three-Dimensional Kinematic Analysis of a Two Actuated Spoke Wheel Robot Based on Its Equivalency to a Serial Manipulator

# publisherOf[].label
NUMERICAL INVESTIGATION OF THERMAL FIELDS AROUND SUBSEA BURIED PIPELINES

# publisherOf[].label
Impacting Designer Creativity Through IT-Enabled Concept Generation

# publisherOf[].label
Ignition of Various Lubricating Oil Compositions Using a Shock Tube

# publisherOf[].label
EXPERIMENTAL VALIDATION OF COMPLIANT JOINTS IN A DYNAMIC SPAR NUMERICAL MODEL

# publisherOf[].label
Beyond the Known: Detecting Novel Feasible Domains Over an Unbounded Design Space

# publisherOf[].label
Transfer Learning in Multi-Objective Generative Design of Metamaterials

# publisherOf[].label
Teaching Students to Innovate: Evaluating Methods for Bioinspired Design and Their Impact on Design Self Efficacy

# publisherOf[].label
Heat Transfer in a Rotating Cooling Channel (AR=2:1) With Rib Turbulators and a Tip Turning Vane

# publisherOf[].label
IMPINGEMENT HEAT TRANSFER ON A CYLINDRICAL, CONCAVE SURFACE WITH VARYING JET GEOMETRIES

# publisherOf[].label
A decentralized output feedback controller for a class of large-scale interconnected nonlinear systems

# publisherOf[].label
Dynamic Characterization of an Integral Squeeze Film Bearing Support Damper for a Supercritical CO2 Expander

# publisherOf[].label
EXPERIMENTAL, NUMERICAL, AND STATISTICAL INVESTIGATION OF TWO PHASE FLOW IN A CYLINDRICAL PERFORATION TUNNEL

# publisherOf[].label
Rotordynamic Force Coefficients of Volutes and Diffusers for Prediction of Turbomachinery Vibration

# publisherOf[].label
Rotordynamic Stability Predictions for Centrifugal Compressors Using a Bulk-Flow Model to Predict Impeller Shroud Force and Moment Coefficients

# publisherOf[].label
Numerical Study of Film Cooling Scheme on a Blunt-Nosed Body in Hypersonic Flow

# publisherOf[].label
A STUDY OF ACTUATION FATIGUE OF SHAPE MEMORY ALLOY

# publisherOf[].label
On the Effect of Clearance on the Leakage and Cavity Pressures in an Interlocking Labyrinth Seal Operating With and Without Swirl Brakes: Experiments and Predictions

# publisherOf[].label
Numerical Simulation for Mixed Convective Flow Over a Three-Dimensional Horizontal Backward Facing Step

# publisherOf[].label
Dynamic Characterization of an Integral Squeeze Film Bearing Support Damper for a Supercritical Co₂ Expander

# publisherOf[].label
Computation of Discrete-Hole Film Cooling by a Near-Wall Second-Moment Turbulence Closure

# publisherOf[].label
Comparison of the Behavior of Different Jet Configurations in a Crossflow

# publisherOf[].label
THEORETICAL AND EXPERIMENTAL COMPARISONS FOR ROTORDYNAMIC COEFFICIENTS OF A HIGH-SPEED, HIGH-PRESSURE, ORIFICE-COMPENSATED HYBRID BEARING

# publisherOf[].label
Understanding friction factor behavior in liquid annular seals with deliberately roughened surfaces

# publisherOf[].label
A UNIFORM CONTROL FOR TRACKING AND POINT STABILIZATION OF DIFFERENTIAL DRIVE ROBOTS SUBJECT TO HARD INPUT CONSTRAINTS

# publisherOf[].label
Thermal Development of an Impinging Jet Using Planar Laser Induced Fluorescence (PLIF)

# publisherOf[].label
Design and analysis of micromachined thermosyphon for cooling of high-power InPHBT circuits

# publisherOf[].label
Effect of Rib Size on Heat (Mass) Transfer Distribution in a Rotation Channel

# publisherOf[].label
CHARACTERIZATION OF A DUAL CHAMBERED TWO PHASE SEPARATOR

# publisherOf[].label
Effects of Inlet Temperature Uniformity and Nonuniformity on the Tip Leakage Flow and Rotor Blade Tip and Casing Heat Transfer Characteristics

# publisherOf[].label
UHEGT, THE ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE WITH STATOR INTERNAL COMBUSTION

# publisherOf[].label
A Decision Support Tool for Distributed Solar and Storage Investments: A Case Study in Austin, TX

# publisherOf[].label
DESIGN OPTIMIZATION OF A SHAPE MEMORY ALLOY ACTUATED MORPHING AEROSTRUCTURE

# publisherOf[].label
Adaptive estimation of time-varying parameters in linearly parametrized systems

# publisherOf[].label
AN EXPLORATORY STUDY ON THE EFFECTIVENESS OF AN INCLUSIVE DESIGN TOOL WITH A METRIC TO EVALUATE INCLUSIVITY OF CONCEPTUAL DESIGNS

# publisherOf[].label
Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels With Angled Ribs Under High Rotation Numbers

# publisherOf[].label
Triboelectrification Between Dissimilar Smooth Metal Surfaces With Self-Assembled Monolayers

# publisherOf[].label
ANFIS Driven Strain Control of Thin-Shape Memory Alloy Wires Using Seebeck Voltage of a Shape Memory Alloy-Constantan Thermocouple

# publisherOf[].label
Modeling unsteady boundary layer transition on a curved plate under periodic unsteady flow conditions: Aerodynamic and heat transfer investigations

# publisherOf[].label
Interactive Learning Platform for the Preliminary Design of Axial Turbines and Its Use for Graduate Courses

# publisherOf[].label
FLUID DYNAMICAL AND MODELING ISSUES OF CHEMICAL FLOODING FOR ENHANCED OIL RECOVERY

# publisherOf[].label
Data-Driven Thermal Comfort Prediction With Support Vector Machine

# publisherOf[].label
Direct Adaptive Control of Discrete-Time Infinite-Dimensional Systems in a Hilbert Space

# publisherOf[].label
Use of High Intensity Milling and Equal Channel Angular Extrusion to Produce and Consolidate Nanostructured Titanium Silicide

# publisherOf[].label
Optimization of the storage process for a cool thermal storage system

# publisherOf[].label
Effect of Density Ratio on Film-Cooling Effectiveness Distribution and Its Uniformity for Several Hole Geometries on a Flat Plate

# publisherOf[].label
ROTATING MACHINERY MONITORING AND FAULT DIAGNOSIS WITH NEURAL NETWORK ENHANCED FUZZY LOGIC EXPERT SYSTEM

# publisherOf[].label
GENERATING STRUCTURE-BORNE TRAVELING WAVES FAVORABLE FOR APPLICATIONS

# publisherOf[].label
DYNAMIC CHARACTERIZATION OF A NOVEL EXTERNALLY PRESSURIZED COMPLIANTLY DAMPED GAS-LUBRICATED BEARING WITH HERMETICALLY SEALED SQUEEZE FILM DAMPER MODULES

# publisherOf[].label
Patent Mining to Understand Functional Evolution of Engineered Products

# publisherOf[].label
Robust Control for Networked Control Systems With Admissible Parameter Uncertainties

# publisherOf[].label
MEASURED STATIC AND ROTORDYNAMIC COEFFICIENT RESULTS FOR A ROCKER-PIVOT, TILTING-PAD BEARING WITH 50 AND 60% OFFSETS

# publisherOf[].label
DESIGN AND OPTIMIZATION OF A BEND-AND-SWEEP COMPLIANT MECHANISM

# publisherOf[].label
EFFECT OF MODEL ELEMENT FIDELITY WITHIN A COMPLEX FUNCTION-BASED BEHAVIORAL MODEL

# publisherOf[].label
Comparison of Model Predictions and Performance Test Data for a Prototype Thermal Energy Storage Module

# publisherOf[].label
Exploring the Uncertainty in the Equation of State for a High Explosive Fit to Heterogeneous Data

# publisherOf[].label
Laminar Flame Speed Measurements and Modeling of Pure Alkanes and Alkane Blends at Elevated Pressures

# publisherOf[].label
Experimental and theoretical comparison of two swirl brake designs

# publisherOf[].label
A FINITE-ELEMENT APPROACH TO PAD FLEXIBILITY EFFECTS IN TILT PAD JOURNAL BEARINGS .1. SINGLE PAD ANALYSIS

# publisherOf[].label
Changes in Bone Mineral Density and Mechanical Properties Due to Alcohol and Ovariectomy in Trabecular Bone of Female Rats

# publisherOf[].label
MULTIPHASE FLOW DEVELOPMENT ON SINGLE PARTICLE MIGRATION IN LOW REYNOLDS NUMBER FLUID DOMAINS

# publisherOf[].label
Thoria-Based Cermet Nuclear Fuel: Cermet Fabrication and Behavior Estimates

# publisherOf[].label
EXPERIMENTAL STUDY OF BREAKING WAVE IMPINGING AND OVERTOPPING A DECK STRUCTURE

# publisherOf[].label
Dependence of Cyclic Stretch-Induced Stress Fiber Reorientation on Stretch Waveform

# publisherOf[].label
FREE-CONVECTION BETWEEN SERIES OF VERTICAL PARALLEL PLATES WITH EMBEDDED LINE HEAT-SOURCES

# publisherOf[].label
Robustness of Using Dynamic Motions and Template Matching to the Limb Position Effect in Myoelectric Classification

# publisherOf[].label
Experimental Results for Labyrinth Gas Seals With Honeycomb Stators: Comparisons to Smooth-Stator Seals and Theoretical Predictions

# publisherOf[].label
Development of graphical indices for viewing building energy data: Part II

# publisherOf[].label
A New Method for Quantifying Abdominal Aortic Wall Shear Stress Using Phase Contrast Magnetic Resonance Imaging and the Womersley Solution.

# publisherOf[].label
Investigation of Hybrid Fuel Cell (HFC) Technology Applications on the Future Passenger Railroad Transportation

# publisherOf[].label
Hermetically Sealed Squeeze Film Damper for Operation in Oil-Free Environments

# publisherOf[].label
Experimental and Numerical Visualization of Heat Transfer and Hydrodynamics Induced by Double Droplet Train Impingement

# publisherOf[].label
Experimental Investigations of the Effect of Scheme Exit Height and Double Row Injection on the Film Cooling Performance of a Micro Tangential Jet Scheme: Part I  Pressure Side

# publisherOf[].label
Suppression of Lateral and Torsional Stick-Slip Vibrations of Drillstrings With Impact and Torsional Dampers

# publisherOf[].label
Numerical Analysis of a Floating Body With Two-Dimensional Moonpool Including Piston Mode

# publisherOf[].label
Magneto-Gas Kinetic Method for Nonideal Magnetohydrodynamics Flows: Verification Protocol and Plasma Jet Simulations

# publisherOf[].label
INFLUENCE OF COOLANT DENSITY ON TURBINE BLADE FILM-COOLING WITH AXIAL SHAPED HOLES

# publisherOf[].label
EVALUATING THE DIRECTED METHOD FOR BIOINSPIRED DESIGN

# publisherOf[].label
A COMPARISON OF A PENALTY FINITE-ELEMENT MODEL WITH THE STREAM FUNCTION-VORTICITY MODEL OF NATURAL-CONVECTION IN ENCLOSURES

# publisherOf[].label
Characterizing Mist Distribution in Through-Tool Minimum Quantity Lubrication Drills

# publisherOf[].label
EFFECT OF UNEVEN WALL TEMPERATURE ON LOCAL HEAT-TRANSFER IN A ROTATING SQUARE CHANNEL WITH SMOOTH WALLS AND RADIAL OUTWARD FLOW

# publisherOf[].label
Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing-Part II: Parametric Studies

# publisherOf[].label
Rotordynamic evaluation of a roughened-land hybrid bearing

# publisherOf[].label
New Predictive Methodology for the Onset of Flow Instability in Single Horizontal Microtube With an Inlet Orifice

# publisherOf[].label
A Novel Method for Calculating the Parametric Hypervolume Indicator

# publisherOf[].label
NUMERICAL SIMULATION OF THERMAL PERFORMANCE OF A HIGH ASPECT RATIO THERMAL ENERGY STORAGE DEVICE

# publisherOf[].label
Shear Bands in Materials Processing: Understanding the Mechanics of Flow Localization From Zener's Time to the Present

# publisherOf[].label
Green's functions for infinite and semi-infinite anisotropic thin plates

# publisherOf[].label
Exploring Automated Text Classification to Improve Keyword Corpus Search Results for Bioinspired Design

# publisherOf[].label
Effect of Mechanical Alloying on Al6061-Graphene Composite Fabricated by Semi-Solid Powder Processing

# publisherOf[].label
Closure to "Discussion of 'A Review of the Rotordynamic Thermally Induced Synchronous Instability (Morton) Effect'" (Tong, X., Palazzolo, A., and Suh, J., 2017, ASME Appl. Mech. Rev., 69(6), p. 060801)

# publisherOf[].label
Reynolds-Averaged Simulation of the Fully Developed Turbulent Drag Reduction Flow in Concentric Annuli

# publisherOf[].label
BENCHMARK EFFORTS TO SUPPORT STUDIES OF ADVANCED VHTRs

# publisherOf[].label
HepatoSeal Multimodal Mono-Bipolar Device for Liver Resection Surgery

# publisherOf[].label
Supramolecular Structure and Stability of the GNNQQNY -Sheet Bilayer Filament: A Computational Study

# publisherOf[].label
A Model Science-Based Learning STEM Program

# publisherOf[].label
TOWARDS HIGH TURNDOWN RATIO SHAPE MEMORY ALLOY-DRIVEN MORPHING RADIATORS

# publisherOf[].label
A Function-Based Methodology for Analyzing Critical Events

# publisherOf[].label
Eccentricity effects on the rotordynamic coefficients of plain annular seals: Theory versus experiment

# publisherOf[].label
Heat Transfer in Rotating, Trailing Edge, Converging Channels With Partial Length Pin-Fins

# publisherOf[].label
Heat Transfer in a Rib and Pin Roughened Rotating Multipass Channel With Hub Turning Vane and Trailing-Edge Slot Ejection

# publisherOf[].label
THE EFFECT OF MICROSTRUCTURAL MORPHOLOGIES ON THE EFFECTIVE ELECTRO-MECHANICAL PROPERTIES OF PIEZOELECTRIC PARTICLE COMPOSITES

# publisherOf[].label
Temperature Field Reconstruction of Surfaces Heated Through Radiative Heat Transfer Using Convolutional Neural Networks

# publisherOf[].label
SUSTAINABLE DISTRIBUTION DESIGN: CONTRASTING DISPOSABLE, RECYCLABLE, AND REUSABLE STRATEGIES FOR PACKAGING MATERIALS USING A TOTAL COST ANALYSIS WITH AN ILLUSTRATION OF MILK DISTRIBUTION

# publisherOf[].label
An Investigation on the Effectiveness of Cross-Sectional Tapering for Broadband Non-Reflective Traveling Waves Generation in Beams With Passive Discontinuities

# publisherOf[].label
The Development of a Dual-Injection Hydrogen-Fueled Engine With High Power and High Efficiency

# publisherOf[].label
Cosine Error-Free Metrology Tool Path Planning for Thickness Profile Measurements

# publisherOf[].label
COMPARISON OF MODEL PREDICTIONS AND PERFORMANCE TEST DATA FOR A PROTOTYPE THERMAL ENERGY STORAGE MODULE

# publisherOf[].label
An Enhanced Axisymmetric Solid Element for Rotor Dynamic Model Improvement

# publisherOf[].label
Functional Analysis: A Fundamental Empirical Study for Reverse Engineering, Benchmarking and Redesign

# publisherOf[].label
NONLINEAR AND DISSIPATIVE CHARACTERISTICS OF A COMBINED RANDOM - CNOIDAL WAVE FIELD

# publisherOf[].label
Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling-Part I: TEHD-CFD Model Validation and Improvements

# publisherOf[].label
Numerical Study of Particle Transport and Deposition in a Horizontal Channel Using a Lagrangian-Based Modelling Approach

# publisherOf[].label
Effect of Leakage Flow Path Wear on Axial Thrust in Downhole Electrical Submersible Pump Unit

# publisherOf[].label
Turbulent Mixing Process of a Round Jet With Slot Lobes

# publisherOf[].label
Surface Variation Reduction for Face Milling Based on High-Definition Metrology

# publisherOf[].label
A Market-Based Design Strategy for a Universal Product Family

# publisherOf[].label
Surface Heating Effect on Local Heat Transfer in a Rotating Two-Pass Square Channel With 60 Angled Rib Turbulators

# publisherOf[].label
TRAVELING WAVES AS A DE-POWDERING PROCESS FOR ADDITIVELY MANUFACTURED PARTS

# publisherOf[].label
Auto-Ignition of Gas Turbine Lubricating Oils in a Shock Tube Using Spray Injection

# publisherOf[].label
Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels with Angled Ribs under High Rotation Numbers

# publisherOf[].label
LEAKAGE AND DYNAMIC FORCE COEFFICIENTS OF A POCKET DAMPER SEAL OPERATING UNDER A WET GAS CONDITION: TESTS VS. PREDICTIONS

# publisherOf[].label
Laminar Heat Transfer Behavior of a Phase Change Material Fluid in Microchannels With Staggered Pins

# publisherOf[].label
SIMULATING EDDY CURRENT SENSORS IN BLADE TIP TIMING APPLICATION: MODELING AND EXPERIMENTAL VALIDATION

# publisherOf[].label
Including Functional Models of Biological Phenomena as Design Stimuli

# publisherOf[].label
Thermodynamic Considerations Related to Knock: Results From an Engine Cycle Simulation

# publisherOf[].label
Aircraft Flight Control Using Nonlinear Adaptive Backstepping

# publisherOf[].label
Internal cooling near trailing edge of a gas turbine airfoil with cooling airflow through blockages with holes

# publisherOf[].label
Development of Periodic Unsteady Turbulent Wakes in a Curved Channel at Zero Streamwise Pressure Gradient

# publisherOf[].label
Film Cooling Comparison of Full-Scale Turbine Vanes Using the Pressure Sensitive Paint Technique

# publisherOf[].label
SOLID ELEMENT ROTORDYNAMIC MODELING OF A ROTOR ON A FLEXIBLE SUPPORT STRUCTURE UTILIZING MIMO SUPPORT TRANSFER FUNCTIONS

# publisherOf[].label
On the Volumetric Assessment of Tool Wear in Machining Inserts With Complex Geometries: Need, Methodology and Validation

# publisherOf[].label
AUTONOMOUS LIGHTING AUDITS: PART 1-BUILDING NAVIGATION AND MAPPING

# publisherOf[].label
Intimal Thickening Sourced From Low Wall Shear Stress in Human Left Coronary Artery Was Observed by Optical Coherence Tomography

# publisherOf[].label
Thermal Performance of Double-Sided, Partial Height Strip Fin Arrays in a High Aspect Ratio, Rectangular Channel

# publisherOf[].label
ON THE LOCALIZATION OF BUCKLING PATTERNS

# publisherOf[].label
PREDICTION OF PRESSURE DROPS IN LIQUID-LIQUID TWO-PHASE FLOW ACROSS CIRCULAR CHANNELS

# publisherOf[].label
Acoustic Emission Characterization of Natural Fiber Reinforced Plastic Composite Machining Using a Random Forest Machine Learning Model

# publisherOf[].label
An Overview of Theories of Continuum Mechanics With Nonlocal Elastic Response and a General Framework for Conservative and Dissipative Systems

# publisherOf[].label
Subcooled pool boiling studies on nano-textured surfaces

# publisherOf[].label
NUMERICAL SIMULATION USING REALIZABLE k- TURBULENCE MODEL OF JET FLOW MIXING WITHIN ROD BUNDLES

# publisherOf[].label
A Vascular Access Port for Dialysis With a Polyurethane Foam Seal: A Pilot Study

# publisherOf[].label
PERFORMANCE MEASUREMENT AND QUALITY ASSURANCE APPLICATIONS FOR PASSENGER RAIL PLANNING

# publisherOf[].label
Analytical Predictions of the Air Gap Response of Floating Structures

# publisherOf[].label
Dynamic characteristics of the diverging taper honeycomb-stator seal

# publisherOf[].label
Linear Programming Performance Bounds for Markov Chains With Polyhedrally Translation Invariant Probabilities and Applications to Unreliable Manufacturing Systems and Enhanced Wafer Fab Models

# publisherOf[].label
Analyses of Deformation in Viscoelastic Sandwich Composites Subject to Moisture Diffusion

# publisherOf[].label
Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing-Part II: Dynamic Response

# publisherOf[].label
UNDERSTANDING THE RELATIONSHIP BETWEEN PITCH AGILITY AND PROPULSIVE AERODYNAMIC FORCES IN BIO-INSPIRED FLAPPING WING VEHICLES

# publisherOf[].label
Assessment of Binary Pressure-Sensitive Paint for Temperature and Heat Transfer Coefficient Measurement of Leading-Edge Film Cooling

# publisherOf[].label
A magnetohydrodynamic power panel for space reentry vehicles

# publisherOf[].label
Additively Manufactured Compliant Hybrid Gas Thrust Bearing for Supercritical Carbon Dioxide Turbomachinery: Experimental Evaluation and Fluid-Structure Model Predictions

# publisherOf[].label
CO and H2O Time-Histories in Shock-Heated Blends of Methane and Ethane for Assessment of a Chemical Kinetics Model

# publisherOf[].label
Adaptive Key Component Control for Nonlinear Evolving Systems

# publisherOf[].label
Combined Piezoelectric-Hydraulic Actuator Based Active Vibration Control for Rotordynamic System

# publisherOf[].label
FULL-SCALE TURBINE VANE END-WALL FILM-COOLING EFFECTIVENESS DISTRIBUTION USING PSP TECHNIQUE

# publisherOf[].label
EFFECT OF UNBALANCE FORCE DIRECTION ON A CRACKED ROTOR WHIRL RESPONSE

# publisherOf[].label
Thermodynamic Modeling of Ionic Polymer-Metal Composite Beams

# publisherOf[].label
Studying Shear Behavior of Ductile Metals Using an Atomic Force Microscope

# publisherOf[].label
A Process for Design, Verification, Validation, and Manufacture of Medical Devices Using Immersive VR Environments

# publisherOf[].label
Partially Averaged Navier-Stokes (PANS) Method for Turbulence Simulations-Flow Past a Square Cylinder

# publisherOf[].label
Quantifying Model Discrepancy in Coupled Multi-Physics Systems

# publisherOf[].label
Modeling of Brittle and Ductile Materials Drilling Using Smoothed-Particle Hydrodynamics

# publisherOf[].label
Utilizing a Cycle Simulation to Examine the Use of EGR for a Spark-Ignition Engine Including the Second Law of Thermodynamics

# publisherOf[].label
MODIFIED OPERATING PARAMETER-BASED IYER CORRELATION FOR THE COEFFICIENT OF PERFORMANCE (COP) PREDICTION OF DIFFERENT FLUID PAIRS IN DOUBLE-EFFECT VAPOR ABSORPTION REFRIGERATION (VAR) CYCLES

# publisherOf[].label
Correlation Between Impulse and Compliance Based Methods in Rigid Body Collisions

# publisherOf[].label
TRU-Fueled Very High Temperature Reactors for Applications Requiring an Extended Operation With Minimized Control and No Refueling

# publisherOf[].label
Numerical prediction of film cooling and heat transfer on the leading edge of a rotating blade with two rows holes in a 1-(1)/(2) turbine stage at design and off design conditions

# publisherOf[].label
PaDGAN: A Generative Adversarial Network for Performance Augmented Diverse Designs

# publisherOf[].label
EXPERIMENTAL INVESTIGATION ON FLOW INSTABILITY IN A SINGLE VERTICAL MICROTUBE

# publisherOf[].label
Theory versus experiment for the rotordynamic characteristics of a high pressure honeycomb annular gas seal at eccentric positions

# publisherOf[].label
Experimental Investigation of Thermal Energy Storage (TES) Platform Leveraging Phase Change Materials in a Chevron Plate Heat Exchanger

# publisherOf[].label
Control of a Directional Downhole Drilling System Using a State Barrier Avoidance Based Method

# publisherOf[].label
Experimental study of the effect of periodic unsteady wake flow on boundary layer development, separation, and reattachment along the surface of a low pressure turbine blade

# publisherOf[].label
Analysis of the Dynamical Behaviour of an Offshore Supply Vessel With Water on Deck

# publisherOf[].label
Creation of Assembly Models to Support Automated Concept Generation

# publisherOf[].label
Design and Optimization of a Contact-Aided Compliant Mechanism for Passive Bending

# publisherOf[].label
Effect of Trailing-Edge Ejection on Local Heat (Mass) Transfer in Pin Fin Cooling Channels in Turbine Blades

# publisherOf[].label
Numerical Simulation of Flow and Heat Transfer in Rotating Cooling Passage with Turning Vane in Hub Region

# publisherOf[].label
Mist Flow in Through-Tool Minimum Quantity Lubrication Drilling: Two-Phase Flow Simulation and Experimental Observation

# publisherOf[].label
Local Heat Transfer Coefficients Under Flows Induced by Vibrating Cantilevers

# publisherOf[].label
A NOTE ON CRITICAL-SPEED SOLUTIONS FOR FINITE-ELEMENT-BASED ROTOR MODELS

# publisherOf[].label
COMBUSTION CHARACTERIZATION OF A FUEL-FLEXIBLE PILOTED LIQUID-SPRAY FLAME APPARATUS USING ADVANCED LASER DIAGNOSTICS

# publisherOf[].label
Non-Contact Laser Ultrasonic Inspection for Cryogenically Introduced Interlayer Defects in Epoxy-Based Composites

# publisherOf[].label
Design and Control of a 6-DOF Positioner With High Precision

# publisherOf[].label
TURBULENT FLOW MEASUREMENTS AND VISUALIZATIONS OF SUPERSONIC JETS IMPINGING ON A FLAT PLATE AND AN INCLINED PLATE

# publisherOf[].label
Improvement of Surface Flatness in Face Milling by Varying the Tool Cutting Depth and Feed Rate

# publisherOf[].label
An Overview of the Direct Energy Conversion Proof of Principle Power Production Program

# publisherOf[].label
Effect of Squealer Geometry Arrangement on a Gas Turbine Blade Tip                     Heat Transfer

# publisherOf[].label
Suppressed Dry-out in Two-Phase Microchannels via Surface Structures

# publisherOf[].label
Interaction of Void Spacing and Material Size Effect on Inter-Void Flow Localization

# publisherOf[].label
Effects of Applied Potential on Friction of a PVDF Micro Gripper

# publisherOf[].label
Heat Transfer and Pressure Loss Correlations for Leading Edge, Jet Impingement Using Racetrack-Shaped Jets With Filleted Edges

# publisherOf[].label
MULTIPHASE FLOW IN A SUBSEA HILLY TERRAIN

# publisherOf[].label
Ignition Delay Time Measurements of C2HX Fuels and Comparison to Several Detailed Kinetics Mechanisms

# publisherOf[].label
Computational Assessment of Double-Inlet Collector in Solar Chimney Power Plant Systems

# publisherOf[].label
A Linear Time-Variant (LTV) Ionic-Polymer-Metal-Composite (IPMC) Electrical Model With Effects of Capacitors and Resistors

# publisherOf[].label
Co-Current Gas-Liquid Smooth-Stratified Flow in a Horizontal Reduced T-Junction Including Wavy and Slug Regime Transition Boundaries

# publisherOf[].label
MIMO active vibration control of magnetically suspended flywheels for satellite IPAC service

# publisherOf[].label
First Steps Towards the Development of a 3D Nuclear Fuel Behavior Solver With OpenFOAM

# publisherOf[].label
Coupling between heat and momentum transfer mechanisms for drag-reducing polymer and surfactant solutions

# publisherOf[].label
Leveraging Machine Learning (Artificial Neural Networks) for Enhancing Performance and Reliability of Thermal Energy Storage Platforms Utilizing Phase Change Materials

# publisherOf[].label
Capturing three-dimensional in vivo lumbar intervertebral joint kinematics using dynamic stereo-X-ray imaging.

# publisherOf[].label
INFLUENCE OF THE LATENT HEAT OF TRANSFORMATION AND THERMOMECHANICAL COUPLING ON THE PERFORMANCE OF SHAPE MEMORY ALLOY ACTUATORS

# publisherOf[].label
Drillstring Vibration Observation, Modeling and Prevention in the Oil and Gas Industry

# publisherOf[].label
Including Housing-Casing Fluid in a Lateral Rotordynamics Analysis on Electric Submersible Pumps

# publisherOf[].label
Flywheel energy storage system for naval applications

# publisherOf[].label
Evolving a Functional Basis for Engineering Design

# publisherOf[].label
AN APPROXIMATION ALGORITHM FOR A HETEROGENEOUS TRAVELING SALESMAN PROBLEM

# publisherOf[].label
Computational Fluid Dynamics Simulations of an Inertance type Pulse Tube Refrigerator

# publisherOf[].label
Twice-running-speed response due to elliptical bearing clearances

# publisherOf[].label
Nacelle Design for Mixed Turbofan Engines

# publisherOf[].label
ERROR QUANTIFICATION OF NUSSELT NUMBER ANALYSIS IN MINIATURE HEAT SINKS: VERIFICATION AND VALIDATION ASSESSMENT

# publisherOf[].label
NREL Phase VI Wind Turbine Modeling Using an Unsteady Panel Method

# publisherOf[].label
Results from an engine cycle simulation of compression ratio and expansion ratio effects on engine performance

# publisherOf[].label
On the Influence of the Entrance Section on the Rotordynamic Performance of a Pump Seal With Uniform Clearance: A Sharp Edge Versus A Round Inlet

# publisherOf[].label
Experimental Force Coefficients for a Fully-Partitioned Pocket Damper Seal and Comparison to Other Two Seal Types

# publisherOf[].label
An Equilibrium Prediction Method for Control and Fault Detection of Energy Systems

# publisherOf[].label
Numerical Study of Film Cooling Scheme on a Blunt-Nosed Body in Hypersonic Flow

# publisherOf[].label
COMBINED RANDOM SWELL AND TRANSIENT LONG WAVES: DISSIPATION CHARACTERISTICS

# publisherOf[].label
Functional Modeling-Based Digital Twin Architecture Representation: An Instructional Example of a COVID-19 Breathalyzer Kiosk

# publisherOf[].label
Three-Dimensional Reconstruction of Bubble Distribution in Two-Phase Flows With Metaball Technique

# publisherOf[].label
Sub-Optimal Tracking in Switched Systems With Controlled Subsystems and Fixed-Mode Sequence Using Approximate Dynamic Programming

# publisherOf[].label
Robust Stabilization of Discrete Linear Time Varying Internal Model Based System

# publisherOf[].label
Influence of groove size on the static and rotordynamic characteristics of short, laminar-flow annular seals

# publisherOf[].label
Handy-Potter: Rapid Exploration of Rotationally Symmetric Shapes Through Natural Hand Motions

# publisherOf[].label
EFFECT OF STEAM DILUTION ON LAMINAR FLAME SPEEDS OF SYNGAS FUEL BLENDS AT ELEVATED PRESSURES AND TEMPERATURES

# publisherOf[].label
Synthesizing Designs With Interpart Dependencies Using Hierarchical Generative Adversarial Networks

# publisherOf[].label
Direct Numerical Simulation of the Flow Through a Randomly Packed Pebble Bed

# publisherOf[].label
Robust Controller Design for Active Vibration Control

# publisherOf[].label
Creating Reduced Kinetics Models That Satisfy the Entropy Inequality

# publisherOf[].label
Imaging of Port Wine Stain Lesions Using a Multi-Sensor Photoacoustic Probe

# publisherOf[].label
Computational Modeling of Material Failure

# publisherOf[].label
A Computational Framework to Evaluate the Effectiveness of Intrasaccular Therapies for Cerebral Aneurysms

# publisherOf[].label
CHARACTERIZATION AND COMBUSTION PERFORMANCE OF CORN OIL-BASED BIOFUEL BLENDS

# publisherOf[].label
Average Heat Transfer Coefficients for Forced Convection on a Flat Plate with an Adiabatic Starting Length

# publisherOf[].label
FULLY PLASTIC CRACK PROBLEMS .2. APPLICATION OF CONSISTENCY CHECKS

# publisherOf[].label
Theoretical Approach for the Fast Estimation of the Turbulent Kinematic Viscosity for Internal Flows

# publisherOf[].label
Contact Transition Control of Nonlinear Mechanical Systems Subject to Unilateral Constraints

# publisherOf[].label
Precision Cutting Tool Wear Monitoring Method by Knife-Edge Diffraction Interferometry

# publisherOf[].label
Evaluation of a Machine Learning Turbulence Model in a Square Transverse Jet in Crossflow

# publisherOf[].label
GREEN WATER FLOW ON A FIXED MODEL STRUCTURE IN A LARGE WAVE BASIN UNDER RANDOM WAVES

# publisherOf[].label
FORCED COEFFICIENTS FORA SHORT LENGTH, OPEN-ENDS SQUEEZE FILM DAMPER WITH END GROOVES: EXPERIMENTS AND PREDICTIONS

# publisherOf[].label
WAVELET-BASED FILTERED-X LMS ALGORITHM FOR THE CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTORS

# publisherOf[].label
NUMERICAL INVESTIGATION OF SLIP FLOW AND HEAT TRANSFER IN ROTATING RECTANGULAR MICROCHANNELS

# publisherOf[].label
Bayesian Calibration of Multiple Coupled Simulation Models for Metal Additive Manufacturing: A Bayesian Network Approach

# publisherOf[].label
Thermodynamic Considerations for Advanced, High Efficiency IC Engines

# publisherOf[].label
The measured energy impact of infiltration in an outdoor test cell

# publisherOf[].label
Experimental Flow-Field Investigations Downstream a Scaled-Up Micro-Tangential-Jet Scheme Using the Particle Image Velocimetry Technique

# publisherOf[].label
LARGE EDDY SIMULATIONS OF JET FLOW INTERACTION WITHIN STAGGERED ROD BUNDLES

# publisherOf[].label
Film Cooling Effectiveness Distributions on a Flat Plate With a Double Hole Geometry Using PSP

# publisherOf[].label
Design and Characterization of a Resistively Heated Shape Memory Polymer Micro-Release Device

# publisherOf[].label
DECENTRALIZED CONTROL OF PRINT REGISTRATION IN ROLL-TO-ROLL PRINTING PRESSES

# publisherOf[].label
Numerical simulation of two-phase sloshing flow in LNG tank using finite-analytic level-set method

# publisherOf[].label
Investigation of microbubble boundary layer using particle tracking velocimetry

# publisherOf[].label
REVIEW ON BUBBLE DYNAMICS IN MICROCHANNEL HEAT SINK

# publisherOf[].label
Template-Free Fabrication of Aligned Nanoarray for Quantifying the Nanosurface-Single Cells Interaction

# publisherOf[].label
AN EXPERIMENTAL STUDY OF BI-DIRECTIONAL STRUCTURE VIBRATION SUPPRESSION USING LPC IMPACT DAMPERS

# publisherOf[].label
Theory and test correlation for laminate stacking factor effect on homopolar bearing stiffness

# publisherOf[].label
Heat Transfer in Trailing Edge, Wedge Shaped Cooling Channels With Slot Ejection Under High Rotation Numbers

# publisherOf[].label
ANALYSIS OF FILM COOLING EFFECTIVENESS ON A GAS TURBINE BLADE WITH AN UNSTEADY WAKE USING FAST RESPONSE PRESSURE SENSITIVE PAINT

# publisherOf[].label
Thermomechanical Coupling in Inelastic Solids

# publisherOf[].label
Periodic Motions of the Machine Tools in Cutting Process

# publisherOf[].label
In Vitro Study of Transcatheter Delivery of a Shape Memory Polymer Foam Embolic Device for Treating Cerebral Aneurysms

# publisherOf[].label
Damage Diagnostics of Composite Fan Blades Using the Modified Time Reversal Method

# publisherOf[].label
Flow of a Fluid of the Differential Type in a Journal Bearing

# publisherOf[].label
Simulation of Frictional Sliding Under Impact Shear Loading

# publisherOf[].label
Experimental Study on Near-Wall Flow Dynamics of a Pebble Bed with Advanced Measurement Techniques

# publisherOf[].label
Rotordynamic evaluation of a near-tangential-injection hybrid bearing

# publisherOf[].label
Accuracy of elastic property measurement in mandibular cortical bone is improved by using cylindrical specimens.

# publisherOf[].label
A Comparative Assessment of Simplified Models for Simulating Parametric Roll

# publisherOf[].label
SIMULATION AND CONTROL DESIGN FOR SHAPE MEMORY ALLOY TORQUE TUBES

# publisherOf[].label
Three-dimensional solutions of smart functionally graded plates

# publisherOf[].label
CURRENT STATE OF THE ART: PROBLEM-DRIVEN MULTI-FUNCTIONAL BIO-INSPIRED DESIGNS

# publisherOf[].label
Supporting negotiations in the early stage of large-scale mechanical system design

# publisherOf[].label
Heat Transfer in Trailing Edge, Wedge Shaped Cooling Channels with Slot Ejection under High Rotation Numbers

# publisherOf[].label
Device-based in vitro techniques for mechanical stimulation of vascular cells: a review.

# publisherOf[].label
A Combined Experimental and Numerical Study of the Turbine Blade Tip Film Cooling Effectiveness under Rotation Condition

# publisherOf[].label
Lubrication With Emulsion in Cold Rolling

# publisherOf[].label
Nonlinear Identification of Mechanical Parameters in a Squeeze Film Damper With Integral Mechanical Seal

# publisherOf[].label
VELOCITY, PRESSURE, AND DAM-BREAK SIMILARITY OF GREEN WATER FLOW ON A 3D STRUCTURE

# publisherOf[].label
Thermohydrodynamic analysis of process-liquid hydrostatic journal bearings in turbulent regime .1. The model and perturbation analysis

# publisherOf[].label
Heat Transfer in a Rotating, Two-Pass, Variable Aspect Ratio Cooling Channel With Profiled V-Shaped Ribs

# publisherOf[].label
Development of graphical indices for viewing building energy data: Part I

# publisherOf[].label
Gas Turbine Performance Simulation Using an Optimized Axial Flow Compressor

# publisherOf[].label
Design and Hardware in-the-Loop Validation of an Effective Super-Twisting Controller for Stick-Slip Suppression in Drill-String Systems

# publisherOf[].label
EFFECT OF RIB ANGLE ON LOCAL HEAT MASS-TRANSFER DISTRIBUTION IN A 2-PASS RIB-ROUGHENED CHANNEL

# publisherOf[].label
Flow Field Analysis of a Single Piezoelectric Fan

# publisherOf[].label
A micromechanical approach for analyzing thermo-mechanical responses of functionally graded materials

# publisherOf[].label
Using Sensing Coils to Detect and Correct Lateral Misalignments in an Inductive Power-Transfer Wireless Charging System

# publisherOf[].label
The Effects of Converging and Diverging Axial Taper on the Rotordynamic Coefficients of Liquid Annular Pressure Seals: Theory Versus Experiment

# publisherOf[].label
Synchronized Switch Harvesting on Inductor Interface to Promote Piezoelectric Stack Energy Harvesting From Human Walking

# publisherOf[].label
Bioinspired Materials Design: An Assessment of Methods to Improve a Text Mining Algorithm for Identifying Biological Material Structural Design Principles

# publisherOf[].label
A Combined Experimental and Numerical Study of the Turbine Blade Tip Film Cooling Effectiveness Under Rotation Condition

# publisherOf[].label
Modeling and Control of Strip Transport in Metal Peeling

# publisherOf[].label
Theoretical Prediction of Laminar Burning Speed and Ignition Delay Time of Gas-to-Liquid Fuel

# publisherOf[].label
Damage in Ceramic Matrix Composites With Arbitrary Microstructures

# publisherOf[].label
Dynamic and Thermal Analysis of Rotor Drop on Sleeve Type Catcher Bearings in Magnetic Bearing Systems

# publisherOf[].label
Heat Transfer Measurements in Rotating Blade–Shape Serpentine Coolant Passage With Ribbed Walls at High Reynolds Numbers

# publisherOf[].label
Evaluation of Sub-Zero and Residence Times After Continuous Versus Multiple Intermittent Cryogen Spray Cooling Exposure on Human Skin Phantom

# publisherOf[].label
A NUMERICAL APPROACH IN PREDICTING FLOW FIELD INDUCED BY RANDOMLY MOVING NANO PARTICLES

# publisherOf[].label
In Memoriam: Karl N. Reid, Jr., 1934-2021

# publisherOf[].label
Two Jeffcott-Based Modal Simulation Models for Flexible Rotating Equipment

# publisherOf[].label
NOX-HYDROCARBON KINETICS MODEL VALIDATION USING MEASUREMENTS OF H2O IN SHOCK-HEATED CH4/C2H6 MIXTURES WITH NO2 AS OXIDANT

# publisherOf[].label
AUTOMATED SUBSEA ARCHITECTURE OPTIMIZATION USING LOW-DIMENSIONAL MULTIPHASE FLOW MODELS

# publisherOf[].label
Impact of Thermal-Hydraulic Feedback and Differential Thermal Expansion on European Sodium-Cooled Fast Reactor Core Power Distribution

# publisherOf[].label
Film-cooling effectiveness on a rotating blade platform

# publisherOf[].label
Thermal and Electrical Performance Analysis of a Novel Medium Concentration Dual Photovoltaic System for Different Phase Change Materials

# publisherOf[].label
A THERMALLY ACTUATED MICROVALVE FOR IRRIGATION IN PRECISION AGRICULTURE APPLICATIONS

# publisherOf[].label
Special issue on analysis and control of multi-agent dynamic systems

# publisherOf[].label
Test results for liquid "damper" seals using a round-hole roughness pattern for the stators

# publisherOf[].label
Enhancement of Saturation Boiling of PF-5060 on Microporous Surface

# publisherOf[].label
Integrated Multi-Modular Fast Reactor Concept Design

# publisherOf[].label
Correlation of Longitudinal Intravascular Ultrasound Data for the Clinical Assessment of Coronary Artery Disease Progression

# publisherOf[].label
Three Dimensional PDMA Assembly: Design, Process, and Applications

# publisherOf[].label
Decorin Deficient Cells Demonstrate Increased Proliferation and Altered Phenotypic Properties

# publisherOf[].label
A Study of Anti-Rolling Tank on Floating Vessel

# publisherOf[].label
Adaptive Individual Blade Pitch Control to Reduce Platform Pitch Motion of a Floating Offshore Wind Turbine: Preliminary Study

# publisherOf[].label
PARTIALLY AVERAGED NAVIER-STOKES TURBULENCE MODELING OF FLOW IN 5X5 PWR FUEL ASSEMBLY WITH SPACER GRID

# publisherOf[].label
Effect of Icing on Ship Maneuvering Characteristics

# publisherOf[].label
Development of an inverse method to estimate overall building and ventilation parameters of large commercial buildings

# publisherOf[].label
Automated Manufacturability Analysis for Injection-Molded and Die-Cast Parts

# publisherOf[].label
Hierarchical divergence-free bases and their application to particulate flows

# publisherOf[].label
Influence of curvature and pressure gradient on turbulent wake development in curved channels

# publisherOf[].label
Heat Transfer from a Plate Elevated above a Host Surface and Washed by a Separated Flow Induced by the Elevation Step

# publisherOf[].label
Nanoscale direct patterning with a combination of micro zone plates and pulsed light sources

# publisherOf[].label
Energy Harvesting and Damping Capability of Quarter-Car Test Bed

# publisherOf[].label
A Product Architecture-Based Tool for Bioinspired Function-Sharing

# publisherOf[].label
Kinesthetic Metaphors for Precise Spatial Manipulation: A Study of Object Rotation

# publisherOf[].label
Evaluating Designer Learning and Performance in Interactive Deep Generative Design

# publisherOf[].label
Computation of flow and heat transfer in two-pass channels with 60 deg ribs

# publisherOf[].label
An Innovative Design for Drillstring Testbed for High Pressure High Temperature Drilling

# publisherOf[].label
Optimized realization of fault-tolerant heteropolar magnetic bearings

# publisherOf[].label
Partially-averaged Navier-Stokes model for turbulence: A Reynolds-averaged Navier-Stokes to direct numerical simulation bridging method

# publisherOf[].label
TEST-RESULTS FOR TURBULENT ANNULAR SEALS, USING SMOOTH ROTORS AND HELICALLY GROOVED STATORS

# publisherOf[].label
Direct Adaptive Rejection of Vortex-Induced Disturbances for a Powered Spar Platform

# publisherOf[].label
Influence of Grain Size Distribution on Ductile Intergranular Crack Growth Resistance

# publisherOf[].label
Motion Control Along Spatial Curves for Robot Manipulators: A Non-Inertial Frame Approach

# publisherOf[].label
Vibration Absorption in a Nonlinear Metamaterial Beam Incorporating Shape Memory Alloys

# publisherOf[].label
Comparison of Analytical and Centrifuge Model Tests for Suction Caissons Subjected to Combined Loads

# publisherOf[].label
A model of stress and strain in the interosseous ligament of the forearm based on fiber network theory.

# publisherOf[].label
Analysis of VVER1000/320 Operational Transient With CATHARE Computer Program

# publisherOf[].label
Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=2:1) With Discrete V-Shaped and Discrete Angled Rib Turbulators

# publisherOf[].label
SURFACE HEATING EFFECT ON LOCAL HEAT-TRANSFER IN A ROTATING 2-PASS SQUARE CHANNEL WITH 60-DEG ANGLED RIB TURBULATORS

# publisherOf[].label
Time-domain simulation of riser VIV in sheared current

# publisherOf[].label
Integrity of 3LPE Pipeline Coatings - Residual Stresses and Adhesion Degradation

# publisherOf[].label
Lubrication With Binary Mixtures: Liquid-Liquid Emulsion in an EHL Conjunction

# publisherOf[].label
COAL-WATER SLURRY SPRAY CHARACTERISTICS OF A POSITIVE DISPLACEMENT FUEL-INJECTION SYSTEM

# publisherOf[].label
EFFICIENCY CONSIDERATIONS OF LATER-PHASED LOW TEMPERATURE DIESEL COMBUSTION

# publisherOf[].label
Three-Dimensional Bubble Reconstruction in a Pipe Flow Using Shadow Technique

# publisherOf[].label
HYBRID ACTIVE VIBRATION CONTROL OF ROTORBEARING SYSTEMS USING PIEZOELECTRIC ACTUATORS

# publisherOf[].label
Influence of Matrix Material on Impact Properties of Chopped Carbon Fiber-Thermoplastic Composites Made Using FDM/FFF

# publisherOf[].label
Experimental Investigation of the Clocking Effect in a 1.5-Stage Axial TurbinePart I: Time-Averaged Results

# publisherOf[].label
Scuffing Resistance of Laser Textured Surfaces

# publisherOf[].label
Experimental Investigation of Louver Cooling Scheme on Gas Turbine Vane Suction Side

# publisherOf[].label
Understanding the Relation Between Designer Search Strategies and Designer Learning During Design Space Exploration

# publisherOf[].label
Thrust Measurements and Flow Field Analysis of a Piezoelectrically Actuated Oscillating Cantilever

# publisherOf[].label
A Theoretical Assessment of Surface Defect Machining and Hot Machining of Nanocrystalline Silicon Carbide

# publisherOf[].label
Passive Multi-Degree-of-Freedom Structural Control Using LPC Impact Dampers

# publisherOf[].label
Strategies for Analysis of Textile Composites

# publisherOf[].label
Suppression of Irregular Frequency Effect in Hydrodynamic Problems and Free-Surface Singularity Treatment

# publisherOf[].label
Development of a unique, passive, microgravity vortex separator

# publisherOf[].label
Analysis of wave run-up measurements on a mini-TLP

# publisherOf[].label
Rotordynamic Force Prediction of a Shrouded Centrifugal Pump Impeller-Part II: Stability Analysis

# publisherOf[].label
System Identification and Optimal Control of a 6-DOF Magnetic Levitation Stage With Nanopositioning Capabilities

# publisherOf[].label
INVESTIGATION OF FLOWZAN AS NON-NEWTONIAN CUTTING TRANSPORT FLUID IN DIRECTIONAL DRILLING APPLICATIONS VIA ELECTRICAL RESISTANCE TOMOGRAPHY METHOD

# publisherOf[].label
Design and Manufacture of a Morphing Structure for a Shape-Adaptive Supersonic Wind Tunnel Nozzle

# publisherOf[].label
The Effect of Static and Dynamic Loading on Degradation of PLLA Stent Fibers

# publisherOf[].label
EFFECT OF IMPINGEMENT SUPPLY CONDITION ON LEADING EDGE HEAT TRANSFER WITH ROUNDED IMPINGING JETS

# publisherOf[].label
A Study of the Effects of Inlet Preswirl on the Dynamic Coefficients of a Straight-Bore Honeycomb Gas Damper Seal

# publisherOf[].label
STATIC DESTABILIZING BEHAVIOR FOR GAS ANNULAR SEALS AT HIGH ECCENTRICITY RATIOS

# publisherOf[].label
Multi-Input-Multi-Output Control of a Utility-Scale, Shaftless Energy Storage Flywheel With a Five-Degrees-of-Freedom Combination Magnetic Bearing

# publisherOf[].label
Design of Controls to Attenuate Loads in the Controls Advanced Research Turbine

# publisherOf[].label
COMBINED PIEZOELECTRIC-HYDRAULIC ACTUATOR BASED ACTIVE VIBRATION CONTROL FOR ROTORDYNAMIC SYSTEM

# publisherOf[].label
Modeling of Internal Damage Evolution During Actuation Fatigue in Shape Memory Alloys

# publisherOf[].label
An Analytical Model to Predict Condensation of R-410A in a Horizontal Rectangular Channel

# publisherOf[].label
Void Growth in an Elastic-Plastic Medium

# publisherOf[].label
Analysis of Two-Phase Air/Water Bubbly Flow Experiment

# publisherOf[].label
A NUMERICAL STUDY OF FORCED CONVECTIVE HEAT TRANSFER CHARACTERISTICS OF SUPERCRITICAL FLUID IN A HORIZONTAL CIRCULAR-PIPE

# publisherOf[].label
OPTIMAL SWITCHING SYNTHESIS FOR JUMP LINEAR SYSTEMS WITH GAUSSIAN INITIAL STATE UNCERTAINTY

# publisherOf[].label
Two Jeffcott-Based Modal Simulation Models for Flexible Rotating Equipment

# publisherOf[].label
EFFECTS OF PROCESSING AND LOADING ON EQUIATOMIC NITI FATIGUE LIFE AND LOCALIZED FAILURE MECHANISMS

# publisherOf[].label
Backward Mapping Methodology for Design Synthesis

# publisherOf[].label
Investigation of Porosity and Microstructure-Induced Property Variations in Additive Manufactured Stainless Steel 316L

# publisherOf[].label
Impact of Frequency Dependence of Gas Labyrinth Seal Rotordynamic Coefficients on Centrifugal Compressor Stability

# publisherOf[].label
Limits on Transformation Strains for Non-Negative Dissipation

# publisherOf[].label
COMPUTATIONAL AND IN VIVO ANALYSIS OF THE ROLE OF SOLID BIOMECHANICS IN THE DEVELOPMENT OF INTIMAL THICKENING POST-STENTING

# publisherOf[].label
Suppression of Persistent Rotor Vibrations Using Adaptive Techniques

# publisherOf[].label
Fluid Flow and Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry in Turbulent Flow

# publisherOf[].label
ALGORITHMS FOR LOCALIZATION AND ROUTING OF UNMANNED VEHICLES IN GPS-DENIED ENVIRONMENTS

# publisherOf[].label
Heat Transfer in Rotating, Trailing Edge, Converging Channels With Smooth Walls and Pin-Fins

# publisherOf[].label
THE FUNCTIONAL BASIS OF STEADY-STATE THERMAL-ENERGY USE IN AIR-SIDE HVAC EQUIPMENT

# publisherOf[].label
A THEORETICAL LOOK AT THE IMPACT OF INCENTIVES ON DESIGN PROBLEM EFFORT PROVISION

# publisherOf[].label
Functional Tolerancing: A Design for Manufacturing Methodology

# publisherOf[].label
A Model for the Design of a Pomelo Peel Bioinspired Foam

# publisherOf[].label
Towards a Biomechanical Model of the Breast: A Simulation-Based Study

# publisherOf[].label
Trough Type Concentrating Solar Power Plant Cost Assessment With Component Scaling

# publisherOf[].label
A Microthermal Sensor for Cryoablation Balloons.

# publisherOf[].label
Advanced Five-Plane Lancet Needle Design, Grinding, and Tissue Insertion

# publisherOf[].label
Static Performance Characteristics and Rotordynamic Coefficients for a Four-Pad Ball-in-Socket Tilting Pad Journal Bearing

# publisherOf[].label
Dynamic Modeling of Powder Delivery Systems in Gravity-Fed Powder Feeders

# publisherOf[].label
3D Flow Simulations in a Simplified Right Ventricle Model

# publisherOf[].label
Evaluation of Different Squealer Cavity Configurations in a HPT Blade Tip Region and its Influence on the Heat Transfer

# publisherOf[].label
Control-oriented modeling of transcritical vapor compression systems

# publisherOf[].label
3D Reconstruction of the Left Ventricle From Four Echocardiographic Projections

# publisherOf[].label
Multi-Information Source Fusion and Optimization to Realize ICME: Application to Dual-Phase Materials

# publisherOf[].label
A COMPREHENSIVE STUDY OF THE SINTERING OF COPPER NANOPARTICLES USING FEMTOSECOND, NANOSECOND AND CONTINUOUS WAVE LASERS

# publisherOf[].label
A NUMERICAL CODE FOR WAVES IN A TWO-LAYER SHALLOW FLUID

# publisherOf[].label
GETRAN - A GENERIC, MODULARLY STRUCTURED COMPUTER CODE FOR SIMULATION OF DYNAMIC BEHAVIOR OF AERO AND POWER-GENERATION GAS-TURBINE ENGINES

# publisherOf[].label
Experimental Investigations of the Film Cooling Performance of a Micro-Tangential-Jet Scheme on a Gas Turbine Vane: Part 2  Heat Transfer Coefficient

# publisherOf[].label
Investigation of Mass Savings Potential of Zeolite Integrated Motor Thermal Management Systems in All-Electric Commercial Aircraft

# publisherOf[].label
Proto-TAI++: Exploring Perceptually Consistent Creation of Planar Shape Assemblies Through Multimodal Tangible Interactions

# publisherOf[].label
FunctionCAD: A Functional Modeling Application Based on the Function Design Framework

# publisherOf[].label
Characterization of the Flow and Surface Temperature Around Multiple Vortex Generators

# publisherOf[].label
Fabrication of Phase Reflection Sawtooth Gratings Optimized by Scalar and Vector Way by Using Diamond Cutting

# publisherOf[].label
IMPACT OF COUPLED WHIRLING AND TOOL GEOMETRY ON MACHINING DYNAMICS

# publisherOf[].label
A New Rotary Position-Control System With Color Sensing

# publisherOf[].label
Automated Multi-Zone Linear Parametric Black Box Modeling Approach for Building HVAC Systems

# publisherOf[].label
A New Method for the Prediction of Compressor Performance Maps Using One-Dimensional Row-by-Row Analysis

# publisherOf[].label
The Influence of Real Gas Properties on Predictions of Static and Rotordynamic Properties of Annular Seals for Injection Compressors

# publisherOf[].label
Investigation of the Urban Microclimate Variations Based on the Measured Weather Data: a Case Study of Education City and Lusail City of Qatar

# publisherOf[].label
Integration of Febio as an Instructional Tool in the Undergraduate Biomechanics Curriculum.

# publisherOf[].label
COEXISTENCE OF CREEP AND TRANSFORMATION IN HIGH TEMPERATURE SHAPE MEMORY ALLOYS

# publisherOf[].label
INFLUENCE OF SHOCK WAVE ON TURBINE VANE SUCTION SIDE FILM COOLING WITH COMPOUND-ANGLE SHAPED HOLES

# publisherOf[].label
CONTROL OF STRAIN CHARACTERISTICS OF SMA WIRES USING SEEBECK VOLTAGE

# publisherOf[].label
Water wave interaction on a truncated vertical cylinder

# publisherOf[].label
Computational Study of the Effects of Shock Waves on Film Cooling Effectiveness

# publisherOf[].label
AN ENERGY DELIVERY EFFICIENCY INDEX TO EVALUATE SIMULTANEOUS HEATING AND COOLING EFFECTS IN LARGE COMMERCIAL BUILDINGS

# publisherOf[].label
Methods and Principles for Concurrent Functional Tolerance Design

# publisherOf[].label
EFFICIENT SAMPLING METHODS FOR TRADEOFF STUDIES UNDER UNCERTAINTY

# publisherOf[].label
ROTOR-FLOATER-MOORING COUPLED DYNAMIC ANALYSIS OF MINI TLP-TYPE OFFSHORE FLOATING WIND TURBINES

# publisherOf[].label
A New Family of Higher-Order Time Integration Algorithms for the Analysis of Structural Dynamics

# publisherOf[].label
MIXED FINITE-ELEMENT MODELS FOR LAMINATED COMPOSITE PLATES

# publisherOf[].label
Modeling and Information in the Design Process

# publisherOf[].label
VIBRATION MODELING AND EXPERIMENTAL RESULTS OF TWO PHASE TWIN-SCREW PUMP

# publisherOf[].label
Residual-Flexibility Corrections for Transient Modal Rotordynamic Models

# publisherOf[].label
TURBULENT FLOW CHARACTERISTICS IN A BLOCKED EXTERIOR SUBCHANNEL OF A HELICALLY WRAPPED ROD BUNDLE

# publisherOf[].label
The effects of tank sloshing on LNG vessel responses

# publisherOf[].label
Hindcasting Loss and Evaluating Implications of Track Location for the 2011 Joplin, Missouri Tornado

# publisherOf[].label
LARGE EDDY SIMULATION OF EMULSIFIED CANOLA OIL SPRAYS IN SWIRL -PROMOTED COMBUSTION CHAMBER

# publisherOf[].label
Temperature Dependence of Aerated Turbine Lubricating Oil Degradation From a Lab-Scale Test Rig

# publisherOf[].label
Development of a Computer Program for Three Dimensional Analysis of Zero Speed First Order Wave Body Interaction in Frequency Domain

# publisherOf[].label
Optimization of cryogen spray cooling for port wine stain laser therapy using photoacoustic measurement of epidermal melanin

# publisherOf[].label
MEASUREMENTS VERSUS PREDICTIONS FOR THE ROTORDYNAMIC CHARACTERISTICS OF A 5-PAD, ROCKER-PIVOT, TILTING-PAD BEARING IN LOAD BETWEEN PAD CONFIGURATION

# publisherOf[].label
Interaction of Flow and Film Cooling Effectiveness Between Double-Jet Film-Cooling Holes With Various Spanwise Distances

# publisherOf[].label
DESIGN OF ORIGAMI STRUCTURES WITH SMOOTH FOLDS

# publisherOf[].label
Computation of Flow and Heat Transfer in Rotating Rectangular Channels (AR = 4) With V-Shaped Ribs by a Reynolds Stress Turbulence Model

# publisherOf[].label
Heat transfer enhancement for turbulent flow through blockages with round and elongated holes in a rectangular channel

# publisherOf[].label
TRAVELING WAVE PHENOMENON THROUGH PIEZOELECTRIC ACTUATION OF A FREE-FREE CYLINDRICAL TUBE

# publisherOf[].label
Analysis of Transient Laminar Convective Heat Transfer Inside a Circular Duct

# publisherOf[].label
NUCLEAR SYSTEMS FOR A LOW CARBON ELECTRICAL GRID

# publisherOf[].label
An Undergraduate Laboratory: The Effect of Nanoparticle Self Assembly on the Electrical and Mechanical Properties of Nanocomposites

# publisherOf[].label
Analysis of the MSFR Core Neutronics Adopting Different Neutron Transport Models

# publisherOf[].label
Simulation of the Onset of Gas Entrainment From a CANDU Reactor Channel Under LOCA Conditions: II

# publisherOf[].label
Time Resolved PIV Measurements of a Slot Lobed Jet Issuing Into a Crossflow

# publisherOf[].label
Effects of Sterilization on Shape Memory Polyurethane Embolic Foam Devices.

# publisherOf[].label
Design of State-Space-Based Control Algorithms for Wind Turbine Speed Regulation

# publisherOf[].label
REPRESENTING USER ACTIVITY AND PRODUCT FUNCTION FOR UNIVERSAL DESIGN

# publisherOf[].label
Tracking Control of Periodic Signals With Varying Magnitude and Its Application to Hybrid Powertrain

# publisherOf[].label
IMPACT OF SPINDLE SPEED ON MICRO-MILLING STABILITY

# publisherOf[].label
MECHANIX: A SKETCH RECOGNITION TRUSS TUTORING SYSTEM

# publisherOf[].label
Effects of Size and Surface Treatment on Fatigue Life of Fused Filament Fabrication Manufactured Acrylonitrile Butadiene Styrene Parts

# publisherOf[].label
The Flow of a Non-Newtonian Fluid Past Projections and Depressions

# publisherOf[].label
Coupling Between Internal Vortex Shedding and the Axial Acoustic Modes in a Choked Duct Flow: New Experiments

# publisherOf[].label
Extended Kalman Filter for Stereo Vision-Based Localization and Mapping Applications

# publisherOf[].label
Effect of Freestream Turbulence Intensity on Film Cooling Jet Structure and Surface Effectiveness Using PIV and PSP

# publisherOf[].label
Laminar Flow Forced Convection Heat Transfer Behavior of a Phase Change Material Fluid in Microchannels

# publisherOf[].label
HEAT TRANSFER IN TRAILING EDGE WEDGE-SHAPED PIN-FIN CHANNELS WITH SLOT EJECTION UNDER HIGH ROTATION NUMBERS

# publisherOf[].label
Resonant Frequencies in Web Process Lines Due to Idle Rollers and Spans

# publisherOf[].label
Experimental response of a rotor supported on Rayleigh step gas bearings

# publisherOf[].label
Rotation effect on jet impingement heat transfer in smooth rectangular channels with four heated walls and radially outward crossflow

# publisherOf[].label
The Needle With Lancet Point: Geometry for Needle Tip Grinding and Tissue Insertion Force

# publisherOf[].label
Linear and Nonlinear Approach of Hydropneumatic Tensioner Modeling for Spar Global Performance

# publisherOf[].label
Nuclear Power: On PRA and Protective System Maintenance

# publisherOf[].label
EXPERIMENTAL STUDY OF JET FLOW IMPINGEMENT WITHIN A ROD BUNDLE USING PIV TECHNIQUE

# publisherOf[].label
Uncertainty Propagation Analysis of Computational Models in Laser Powder Bed Fusion Additive Manufacturing Using Polynomial Chaos Expansions

# publisherOf[].label
Design of Radiation Tolerant Nanostructured Metallic Multilayers

# publisherOf[].label
An Economic Analysis Method of Energy Saving Strategies in Newly Constructed Buildings

# publisherOf[].label
Performance Evaluation of a Hydraulic Turbine Used As a Turbodrill for Oil and Gas Applications in Post-Salt Environment

# publisherOf[].label
A Subspace-Inclusive Sampling Method for the Computational Design of Compositionally Graded Alloys

# publisherOf[].label
Experimental Investigation of Film Cooling Effectiveness for a New Shaped Hole at the Leading Edge

# publisherOf[].label
Film Cooling Effectiveness on the Leading Edge of a Rotating Turbine Blade

# publisherOf[].label
Cooling Performance of Arrays of Vibrating Cantilevers

# publisherOf[].label
Design, Fabrication, and Testing of a Novel Thermally Actuated Tesla Valve: A Hybrid Microvalve

# publisherOf[].label
Stability of Non-Axisymmetric Rotor and Bearing Systems Modeled With Three-Dimensional-Solid Finite Elements

# publisherOf[].label
Laminar Flame Speed Experiments of Alternative Liquid Fuels

# publisherOf[].label
CENTRIFUGAL-ACCELERATION MODES FOR INCOMPRESSIBLE FLUID IN THE LEAKAGE ANNULUS BETWEEN A SHROUDED PUMP IMPELLER AND ITS HOUSING

# publisherOf[].label
THE DESTRUCTION OF EXERGY DURING THE COMBUSTION PROCESS FOR A SPARK-IGNITION ENGINE

# publisherOf[].label
Generation and Propagation of Thermoacoustic Waves in Mildly Supercritical Carbon Dioxide

# publisherOf[].label
SIMULTANEOUS TIME-FREQUENCY CONTROL OF ACTIVE MAGNETIC BEARING

# publisherOf[].label
AN ANALYTICAL MODEL TO PREDICT NITRIC OXIDE CONCENTRATION AND SOOT EMISSIVITY IN A DIESEL ENGINE

# publisherOf[].label
Refined Model for Inclined Load Capacity of Suction Caissons

# publisherOf[].label
Rotordynamic Force Coefficients for Three Types of Annular Gas Seals With Inlet Preswirl and High Differential Pressure Ratio

# publisherOf[].label
Analysis of In-Flight Oxidation During Reactive Spray Atomization and Deposition Processing of Aluminum

# publisherOf[].label
A Simple Higher-Order Theory for Laminated Composite Plates

# publisherOf[].label
DESIGN AND FABRICATION OF A NOVEL AUTONOMOUS PIPELINE SCANNING ROBOT

# publisherOf[].label
An Empirical Study of the Impact of Task Expectation Framing on Design Decision Delegation

# publisherOf[].label
Interactions Between Structural Remodeling and Hypertrophy in the Right Ventricle in Response to Pulmonary Arterial Hypertension.

# publisherOf[].label
Elastic/plastic contact mechanics-based analysis of hard disk drive media damage from slider corner impacts

# publisherOf[].label
Numerical Study on the Effect of Real Syngas Compositions on Ignition Delay Times and Laminar Flame Speeds at Gas Turbine Conditions

# publisherOf[].label
Generalization of the Fourier series approach to model hourly energy use in commercial buildings

# publisherOf[].label
Numerical Investigation of Multistage Viscous Micropump Configurations

# publisherOf[].label
CRACK GROWTH TESTING OF AN X80 PIPELINE GIRTH WELD USING SE(T) AND SE(B) FRACTURE SPECIMENS

# publisherOf[].label
Direct Numerical Simulation of the Flow in a Bare Rod Bundle at Different Prandtl Numbers

# publisherOf[].label
Study of Subcooled Film Boiling on a Horizontal Disc:1 Part 2Experiments

# publisherOf[].label
Impingement Heat Transfer Enhancement on a Cylindrical, Leading Edge Model With Varying Jet Temperatures

# publisherOf[].label
DESIGN OF DELAY INDEPENDENT STATE FEEDBACK CONTROL FOR ROLL-TO-ROLL PRINTING APPLICATIONS

# publisherOf[].label
Kinematics of an Articulated Connecting Rod and Its Effect on Simulated Compression Pressures and Port Timings

# publisherOf[].label
Modal Reduction Technique for Predicting the Onset of Chaotic Behavior due to Lateral Vibrations in Drillstrings

# publisherOf[].label
The Flow of a Non-Newtonian Fluid Past Projections and Depressions

# publisherOf[].label
SENSITIVITY STUDY OF THE SOUTH TEXAS PROJECT POWER PLANT STEADY-STATE SIMULATIONS USING RELAP5-3D COUPLED WITH DAKOTA

# publisherOf[].label
MICROFLOW CYTOMETER: HYDRODYNAMIC FOCUSING AND SEPARATION OF SAMPLE STREAM

# publisherOf[].label
Direct Linearization of Continuous and Hybrid Dynamical Systems

# publisherOf[].label
PROJECT BASED ACTIVITIES TO ATTRACT STUDENTS TO MARINE ENGINEERING AND TECHNOLOGY CAREERS

# publisherOf[].label
Research Workshop Tribology Issues in Biology and Medicine

# publisherOf[].label
COMMENTS ON A NEWLY-IDENTIFIED DESTABILIZING ROTORDYNAMIC MECHANISM ARISING IN VERTICAL HYDRAULIC TURBINES AND THE BACK SHROUDS OF CENTRIFUGAL IMPELLERS

# publisherOf[].label
"USED FUEL" VECTORS AND WASTE MINIMIZATION STRATEGIES FOR VHTRs OPERATING WITHOUT REFUELING

# publisherOf[].label
Thermal Characterization of a Turbulent Free Jet with Planar Laser Induced Fluorescence (PLIF)

# publisherOf[].label
Turbopump Booster Turbine Performance: Comparison Between Monophase and Multiphase Flows Using CFD

# publisherOf[].label
INVESTIGATION OF INTERFACIAL THERMAL RESISTANCE ON NANO-STRUCTURES USING MOLECULAR DYNAMICS SIMUALTIONS

# publisherOf[].label
Adaptive Tracking Control for Linear Infinite Dimensional Systems

# publisherOf[].label
Computation of flow and heat transfer in rotating rectangular channels (AR=4 : 1) with pin-fins by a Reynolds stress turbulence model

# publisherOf[].label
Function Design Framework (FDF): Integrated Process and Function Modeling for Complex Systems

# publisherOf[].label
Energetic and Economic Potential for Load Control for Residential Customers in Austin, TX

# publisherOf[].label
Full Coverage Film Cooling Performance for Combustor Cooling Manufactured Using DMLS

# publisherOf[].label
An Inverse Heat Transfer Method for Determining Workpiece Temperature in Minimum Quantity Lubrication Deep Hole Drilling

# publisherOf[].label
MODELING OF TEMPERATURE DISTRIBUTION IN A MOVING WEB TRANSPORTED OVER A HEAT TRANSFER ROLLER

# publisherOf[].label
Predicting Well Performance in Naturally Fractured Reservoir

# publisherOf[].label
Analysis of a CRDM Nozzle Break LOCA Without Scram Using the U.S. NRC Coupled Code TRAC-M/PARCS

# publisherOf[].label
Adaptive Dimensionality Reduction for Fast Sequential Optimization With Gaussian Processes

# publisherOf[].label
Superlubricity and Near-Wearless Sliding in Carbon Films

# publisherOf[].label
Observer Design for Axial Flow Compressor

# publisherOf[].label
MODELING MATERIAL REMOVAL IN LAPPING OF BRITTLE MATERIALS

# publisherOf[].label
Thermodynamically Consistent Variational Approach for Modeling Brittle Fracture in Thick Plates by a Hybrid Phase Field Model

# publisherOf[].label
Real-Time Analysis of Engine Power, Thermal Efficiency, and Emission Characteristics Using Refined and Transesterified Waste Vegetable Oil

# publisherOf[].label
DEVELOPMENT OF A MULTI-BODY VESSEL DYNAMICS SIMULATION TOOL

# publisherOf[].label
Technology Characterization Models and Their Use in Systems Design

# publisherOf[].label
Experimental and Numerical Evaluation of a Scaled-Up Micromixer With Groove Enhanced Division Elements

# publisherOf[].label
DIRECT NUMERICAL SIMULATION AND LINEAR STABILITY ANALYSIS OF THE FLOW IN A PEBBLE BED

# publisherOf[].label
DESIGN AND SYNTHESIS OF A HIGH PERFORMANCE COATING

# publisherOf[].label
Teaching Design and Automation Principles Through a National Robotics Competition

# publisherOf[].label
MULTI-PARAMETRIC TUNING OF DYNAMIC AIR CONDITIONING MODELS USING EXPERIMENTAL DATA

# publisherOf[].label
A Sensor Fusion Based Pan-Tilt Platform for Activity Tracking and Fall Detection

# publisherOf[].label
Cryogen Droplet Impingement Onto Indented Surfaces Relevant to Dermatologic Laser Surgery Therapies

# publisherOf[].label
Modal Wavelets Analysis to Gas-Liquid Two Phase Flow PIV Images

# publisherOf[].label
THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC COEFFICIENTS OF ANNULAR GAS SEALS .1. TEST FACILITY AND APPARATUS

# publisherOf[].label
Frequency dependency of measured and predicted rotordynamic coefficients for a load-on-pad flexible-pivot tilting-pad bearing

# publisherOf[].label
Assessment of a Reynolds stress closure model for appendage hull junction flows

# publisherOf[].label
ELASTOMERIC FENDER SYSTEMS SUBJECT TO RANDOM EXCITATION

# publisherOf[].label
A STUDY FOR ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF A LONG-HONEYCOMB SEAL WITH TWO-PHASE, MAINLY AIR MIXTURES

# publisherOf[].label
TIME-DOMAIN SIMULATION OF A MULTI-BODY FLOATING SYSTEM IN WAVES

# publisherOf[].label
Fuel flexibility influences on premixed combustor blowout, flashback autoignition and stability

# publisherOf[].label
NOISE REDUCTION IN A HIGH LIFT WING USING SMAS: COMPUTATIONAL FLUID-STRUCTURAL ANALYSIS

# publisherOf[].label
Design of Horizontal Mechanical Presses for Deep Drawing and Ironing Process

# publisherOf[].label
Heat transfer in a two-pass rectangular channel (AR=1 : 4) under high rotation numbers

# publisherOf[].label
Flow and Pressure Characteristics Downstream of a Segmental Blockage in a Turbulent Pipe Flow

# publisherOf[].label
FRICTION-FACTOR DATA FOR FLAT-PLATE TESTS OF SMOOTH AND HONEYCOMB SURFACES

# publisherOf[].label
Modeling and Theory of Intermittent Motions in a Machine Tool With a Friction Boundary

# publisherOf[].label
Experimental Evaluation of a Wavy Trailing Edge Cooling Design as an Alternative to Pressure Side Cutback Cooling

# publisherOf[].label
Turbulent Heat Transfer Between a Series of Parallel Plates With Surface-Mounted Discrete Heat Sources

# publisherOf[].label
Zero dimensional quasi-predictive thermodynamic simulation for establishing initial cylinder conditions for CFD simulation of diesel combustion

# publisherOf[].label
Mapping and Enforcement of Minimally Restrictive Manufacturability Constraints in Mechanical Design

# publisherOf[].label
ASSESSMENT OF RANS, LES, AND HYBRID RANS/LES MODELS FOR THE PREDICTION OF LOW-PR TURBULENT FLOWS

# publisherOf[].label
A HYPERHEURISTIC APPROACH TO LEVERAGING DOMAIN KNOWLEDGE IN MULTI-OBJECTIVE EVOLUTIONARY ALGORITHMS

# publisherOf[].label
Unsteady Tip Leakage Flow Characteristics and Heat Transfer on Turbine Blade Tip and Casing

# publisherOf[].label
Evaluation of Pore Geometry Effects on Porous Cell Thermal Behavior

# publisherOf[].label
Full-State Feedback Control of a Variable-Speed Wind Turbine: A Comparison of Periodic and Constant Gains

# publisherOf[].label
A Nonlinear Finite Element Framework for Viscoelastic Beams Based on the High-Order Reddy Beam Theory

# publisherOf[].label
Rigid Formation of a Group of Vehicles Using Constraint Forces

# publisherOf[].label
DYNAMIC MEASUREMENTS OF MICRO-METER PARTICLE DETACHMENT ON GLASS SURFACES

# publisherOf[].label
An Eco-Industrial Park-Based Method for Net Zero Community Creation

# publisherOf[].label
ROTARY ULTRASONIC MACHINING OF CFRP: EFFECTS OF ABRASIVE PROPERTIES

# publisherOf[].label
EFFECT OF DENSITY RATIO ON FLAT PLATE FILM COOLING WITH SHAPED HOLES USING PSP

# publisherOf[].label
Flow Field Characterization at the Onset of Gas Entrainment in a Single Downward Discharge Using Particle Image Velocimetry

# publisherOf[].label
A Model for Improved Prediction of Force Coefficients in Grooved Squeeze Film Dampers and Oil Seal Rings

# publisherOf[].label
Design and Implementation of an Ionic-Polymer-Metal-Composite Aquatic Biomimetic Robot

# publisherOf[].label
Occupant Behavior Modeling for Building Performance Simulation: Review of the Recent Advances and Research Trends

# publisherOf[].label
DEVELOPMENT OF A HYBRID HEAT SINK FOR THERMAL MANAGEMENT OF PHOTOVOLTAIC CELLS

# publisherOf[].label
Temperature Field Reconstruction of Surfaces Heated Through Radiative Heat Transfer Using Convolutional Neural Networks

# publisherOf[].label
PIEZOELECTRIC VIBRATION CONTROL OF A SANDWICH BEAM WITH TIP MASS

# publisherOf[].label
CFD comparison to 3D laser anemometer and rotordynamic force measurements for grooved liquid annular seals

# publisherOf[].label
Calculating the eigenfrequency of rotating acoustic annulus inside labyrinth seals of turbomachines

# publisherOf[].label
A Step Further on the Control of Acceleration of Gas Turbines With Controlled Variable Geometry and Combustion Emissions

# publisherOf[].label
On the Effect of Latent Heat on the Fracture Toughness of Pseudoelastic Shape Memory Alloys

# publisherOf[].label
2-DIMENSIONAL MODELS OF BOUNDARY AND MIXED FRICTION AT A LINE CONTACT

# publisherOf[].label
A Machine Learning Approach to Aircraft Sensor Error Detection and Correction

# publisherOf[].label
Rotordynamics of a Two-Phase Flow Twin Screw Pump

# publisherOf[].label
Detection of Failed Mooring Lines of Spread-Moored FPSO Using Platform Motions and Artificial Neural Networks

# publisherOf[].label
Design and Optimization of a Shape Memory Alloy-Based Self-Folding Sheet

# publisherOf[].label
A CONTINUUM MODEL FOR VOID NUCLEATION BY INCLUSION DEBONDING

# publisherOf[].label
Simulation and analysis of a magnetoelastically driven micro-pump

# publisherOf[].label
On failure mechanisms in flip chip assembly - Part 1: Short-time scale wave motion

# publisherOf[].label
Fluid and thermal dynamics of cryogen sprays impinging on a human tissue phantom.

# publisherOf[].label
Enhanced Specific Heat Capacity of Molten Salt-Based Carbon Nanotubes Nanomaterials

# publisherOf[].label
Special Issue on Conservation and Solar Buildings

# publisherOf[].label
Effect of GTL-like Jet Fuel Composition on GT Engine Altitude Ignition Performance - Part I: Combustor operability

# publisherOf[].label
Modeling a Bidirectional Converter of Photovoltaic Systems for Flywheel Energy Storage Applications

# publisherOf[].label
DEVELOPMENT OF A BIODEGRADABLE REGENERATIVE IMPLANT FOR THE TREATMENT OF LONG BONE COMMINUTED FRACTURES

# publisherOf[].label
ACTIVE ARTIFICIAL HAIR CELLS FOR USE IN FLUID ENVIRONMENTS

# publisherOf[].label
Three-Dimensional Numerical Simulations of Flows Past Smooth and Rough/Bare and Helically Straked Circular Cylinders Allowed to Undergo Two Degree-of-Freedom Motions

# publisherOf[].label
DYNAMIC ANALYSIS AND SLIDING MODE CONTROL OF A NOVEL EXTENDABLE MODULAR MULTI-DOFS LINK

# publisherOf[].label
Chaotic Synchronization of a Class of Nonlinear Systems via Sampled-Data State Feedback

# publisherOf[].label
Preliminary Evaluation of the Bump at the End of the Railway Bridge

# publisherOf[].label
Nonlinear Time-Domain Simulation of the Heaving-Buoy Type Wave Energy Converter by Using Three-Dimensional Potential Numerical Wave Tank Under Irregular Wave Conditions

# publisherOf[].label
Quantifying the Predictive Abilities of Speculative Fiction: A Feasibility Study

# publisherOf[].label
EXPERIMENTAL INVESTIGATIONS OF A COMB-LIKE FILM COOLING SCHEME

# publisherOf[].label
Multiaxis Maglev Positioner With Nanometer Resolution Over Extended Travel Range

# publisherOf[].label
TIME-RESOLVED VELOCITY MEASUREMENTS IN A MATCHED REFRACTIVE INDEX FACILITY OF RANDOMLY PACKED SPHERES

# publisherOf[].label
Computational Fluid Dynamics Analysis and Structural Safety Assessment of a Mitigation Device to Minimize Consequence of a Containment Bypass Nuclear Accident

# publisherOf[].label
Experimental Investigation of Two-Phase Flow in a Multi-Branch Reduced T-Junction With Co-Current Stratified Gas-Liquid Flow

# publisherOf[].label
Moving-Boundary Heat Exchanger Models with Variable Outlet Phase

# publisherOf[].label
Experimental Study of the Transient Turbulence Generated by a Bubble Using PIV

# publisherOf[].label
AN EXPERIMENTAL INVESTIGATION OF ANALOGY FORMATION USING THE ENGINEERING-TO-BIOLOGY THESAURUS

# publisherOf[].label
EXPERIMENTAL IMPLEMENTATION OF OPPOSED SMA WIRES FOR ACTUATOR CONTROL

# publisherOf[].label
VALIDATION OF QUASI-STEADY ANALYSIS FOR LYMPHATIC FLUID FLOW AND MASS TRANSPORT

# publisherOf[].label
EXPERIMENTAL INVESTIGATION OF MECHANICAL AND STRUCTURAL INHOMOGENEITY IN BOVINE CAROTID ARTERIES

# publisherOf[].label
Transient analysis of plain and tilt pad journal bearings including fluid film temperature effects

# publisherOf[].label
Ultrasonic Imaging and Velocimetry in Two-Phase Pipe Flow

# publisherOf[].label
AN EXPERIMENTAL STUDY OF A NOVEL IMPACT DAMPER IN FREE VIBRATION OF STRUCTURES

# publisherOf[].label
Preliminary Analysis of the MSFR Fuel Cycle Using Modified-EQL3D Procedure

# publisherOf[].label
Experimental Study of the Type VI Stilling Basin Performance

# publisherOf[].label
Modeling and Simulation of Capillary Microfluidic Networks Based on Electrical Analogies

# publisherOf[].label
Modeling of the Onset of Gas Entrainment Through a Finite-Side Branch

# publisherOf[].label
Heat (mass) transfer in a serpentine channel with right-angled turns

# publisherOf[].label
The Onset of Gas Entrainment From a Stratified Two-Phase Region Through a Single Side-Oriented Branch

# publisherOf[].label
Prediction of flow and heat transfer in rotating two-pass rectangular channels with 45-deg rib turbulators

# publisherOf[].label
Thermal Cycling of Calcium Chloride Hexahydrate With Strontium Chloride as a Phase Change Material for Latent Heat Thermal Energy Storage Applications in a Nondifferential Scanning Calorimeter Set-Up

# publisherOf[].label
Aiding Airway Obstruction Diagnosis With Computational Fluid Dynamics and Convolutional Neural Network: A New Perspective and Numerical Case Study

# publisherOf[].label
A FORCED RESPONSE ANALYSIS AND APPLICATION OF IMPACT DAMPERS TO ROTORDYNAMIC VIBRATION SUPPRESSION IN A CRYOGENIC ENVIRONMENT

# publisherOf[].label
Identification of Wind Turbine Response to Turbulent Inflow Structures

# publisherOf[].label
Laminar Flame Speed Experiments of Alternative Liquid Fuels

# publisherOf[].label
Interaction of Flow and Film-Cooling Effectiveness Between Double-Jet Film-Cooling Holes With Various Spanwise Distances

# publisherOf[].label
Influence of Coolant Density on Turbine Blade Tip Film Cooling at Transonic Cascade Flow Conditions Using the Pressure-Sensitive Paint Technique

# publisherOf[].label
Special Issue: Proceedings of the Century Fracture Mechanics Summit

# publisherOf[].label
Effects of Blowing and Density Ratios on Unsteady Film Cooling Effectiveness Using Fast-Response Pressure-Sensitive Paint

# publisherOf[].label
A Comparative Study of Active Control Methods for Mitigation of Torsional Stick-Slip Vibrations in Drillstring Systems

# publisherOf[].label
Test and theory correlation study for a flexible rotor on fault-tolerant magnetic bearings

# publisherOf[].label
BIO-INSPIRED MODELING APPROACHES FOR HUMAN NETWORKS WITH LINK DISSIPATION

# publisherOf[].label
Evaluating the Effect of a Student-Centered Pedagogical Approach on Students Skills and Knowledge in Computer-Aided Design (CAD) Course

# publisherOf[].label
COUPLED TIME-DOMAIN HYDRO-ELASTIC SIMULATION FOR SUBMERGED FLOATING TUNNEL UNDER WAVE EXCITATIONS

# publisherOf[].label
PTV EXPERIMENTS OF SUBCOOLED BOILING FLOW THROUGH A RECTANGULAR CHANNEL

# publisherOf[].label
MESOSCOPIC SIMULATION OF SLIP MOTION FOR GAS FLOW IN NANOCHANNELS

# publisherOf[].label
Confinement of freezing front by laser irradiation during cryosurgery

# publisherOf[].label
Discussion: A New Rate Principle Suitable for Analysis of Inelastic Deformation of Plates and Shells (Mukherjee, S., and Kollmann, F. G., 1985, ASME J. Appl. Mech., 52, pp. 533535)

# publisherOf[].label
Cutting Force of Hollow Needle Insertion in Soft Tissue

# publisherOf[].label
Measured Leakage and Rotordynamic Force Coefficients for Two Liquid Annular Seal Configurations: Smooth-Rotor/Grooved-Stator Versus Grooved-Rotor/Smooth-Stator

# publisherOf[].label
Annular Honeycomb Seals: Test Results for Leakage and Rotordynamic Coefficients; Comparisons to Labyrinth and Smooth Configurations

# publisherOf[].label
Performance Evaluation of a 5 kN Gas Turbine Based on Specially Designed Components

# publisherOf[].label
Transmission Clutch Fill Control Using a Customized Dynamic Programming Method

# publisherOf[].label
Monitoring-System Development of Gillnet Using Artificial Neural Network

# publisherOf[].label
Designing Robust Systems Using Bioinspired Product Architecture

# publisherOf[].label
Loss of Residual Heat Removal System Simulation Using CATHARE Thermal Hydraulic Code

# publisherOf[].label
Special Issue: Alan Needleman Symposium: New Frontiers in the Mechanics of Materials Biographical Sketch of Alan Needleman (2015)

# publisherOf[].label
Mobility and Geometrical Analysis of a Two Actuated Spoke Wheel Robot Modeled as a Mechanism With Variable Topology

# publisherOf[].label
A Simple Analytical Model for Specific Heat of Nanofluid With Tube Shaped and Disc Shaped Nanoparticles

# publisherOf[].label
STUDIES ON THE RELATIVE PERFORMANCE OF 3 OSCILLATING WATER COLUMN WAVE ENERGY DEVICES

# publisherOf[].label
COMBINATORIAL MOTION PLANNING FOR A DUBINS VEHICLE WITH PRECEDENCE CONSTRAINTS

# publisherOf[].label
Thoria-Based Cermet Nuclear Fuel: Sintered Microsphere Fabrication by Spray Drying

# publisherOf[].label
Continuous Commissioning(SM) of building energy systems

# publisherOf[].label
The Stick Motion of a Harmonically Excited, Friction-Induced Oscillator on a Sinusoidally Traveling Surface

# publisherOf[].label
Method and detailed analysis of individual hydrocarbon species from diesel combustion modes and diesel oxidation catalyst

# publisherOf[].label
A Process Modeling Methodology for Automation of Manual and Time Dependent Processes

# publisherOf[].label
Effectiveness of Shape Memory Alloy Golf Clubs in Enhancing Golfer Performance

# publisherOf[].label
Measured Comparison of Leakage and Rotordynamic Characteristics for a Slanted-Tooth and a Straight-Tooth Labyrinth Seal

# publisherOf[].label
ANALYSIS AND DESIGN OF AN ACTIVE SELF-FOLDING ANTENNA

# publisherOf[].label
On the Volumetric Assessment of Tool Wear in Machining Inserts With Complex GeometriesPart 1: Need, Methodology, and Standardization

# publisherOf[].label
Experimental force coefficients for a two-bladed labyrinth seal and a four-pocket damper seal

# publisherOf[].label
A Comparison of Augmentation Techniques During In-Tube Evaporation of R-113

# publisherOf[].label
TRANSITION PATHWAY FOR THE MINUS-END DIRECTED MOVEMENT OF KINESIN-14 NCD

# publisherOf[].label
The Future of Digital Twin Research and Development

# publisherOf[].label
Investigation of the Onset of Gas Entrainment in Dual Discharging Oriented Branches on a Curved Wall With Stratified Flow Using Stereo PIV

# publisherOf[].label
Two-Dimensional Vessel-Motion/Liquid-Sloshing Interactions and Impact Loads by Using a Particle Method

# publisherOf[].label
NOx-Hydrocarbon Kinetics Model Validation Using Measurements of H2O in Shock-Heated CH4/C2H6 Mixtures With NO2 As Oxidant

# publisherOf[].label
Eigensolution Reanalysis of Rotor Dynamic Systems by the Generalized Receptance Method

# publisherOf[].label
IMPINGEMENT HEAT TRANSFER ENHANCEMENT ON A CYLINDRICAL, LEADING EDGE MODEL WITH VARYING JET TEMPERATURES

# publisherOf[].label
Angled InjectionHydrostatic Bearings Analysis and Comparison to Test Results

# publisherOf[].label
Modeling of Temperature Distribution in Moving Webs in Roll-to-Roll Manufacturing

# publisherOf[].label
FRICTION FACTOR BEHAVIOR FROM FLAT-PLATE TESTS OF SMOOTH AND HOLE-PATTERN ROUGHENED SURFACES WITH SUPPLY PRESSURES UP TO 84 BARS

# publisherOf[].label
MEASUREMENTS VERSUS PREDICTIONS FOR ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF A CONVERGENT-TAPERED, HONEYCOMB-STATOR/SMOOTH-ROTOR ANNULAR GAS SEAL

# publisherOf[].label
Temperature and Water Vapor Pressure Effects on the Friction Coefficient of Hydrogenated Diamondlike Carbon Films

# publisherOf[].label
Tilting Pad Journal Bearing Misalignment Effect on Thermally Induced Synchronous Instability (Morton Effect)

# publisherOf[].label
Some Remarks on the Equilibrium of Granular Materials Described by Constitutive Relations That Depend on the Gradients of the Density or Volume Fraction

# publisherOf[].label
A Low-Cost Rotary Optical Potentiometer Mechanism Based on Optoelectronics Technique

# publisherOf[].label
Characterization of Tab-Induced Counter-Rotating Vortex Pair for Mixing Applications

# publisherOf[].label
Bioinspired Origami: Case Studies Using a Keyword Search Algorithm

# publisherOf[].label
Near-Wall Velocimetry in the Impingement-Zones of a Microdroplet and a Round Jet Stream

# publisherOf[].label
Heat transfer in trailing edge, wedge-shaped cooling channels under high rotation numbers

# publisherOf[].label
Effects of Non-Uniform Heating on Two-Phase Flow through Microchannels

# publisherOf[].label
Influence of Coolant Density on Turbine Platform Film-Cooling With Stator-Rotor Purge Flow and Compound-Angle Holes

# publisherOf[].label
The Impact of Hole Depth on the Rotordynamic and Leakage Characteristics of Hole-Pattern-Stator Gas Annular Seals

# publisherOf[].label
Rub-Induced Parametric Excitation in Rotors

# publisherOf[].label
Local Heat Transfer Measurements in Microchannels Using Liquid Crystal Thermography: Methodology Development and Validation

# publisherOf[].label
CO and OH Imaging in Flames Using a Single Broadband Femtosecond Laser Pulse

# publisherOf[].label
Comparison of Near-Nozzle Spray Performance of Gas-to-Liquid and Jet A-1 Fuels Using Shadowgraph and Phase Doppler Anemometry

# publisherOf[].label
Coupling Effects of Viscous Sheet and Ambient Fluid on Boundary Layer Flow and Heat Transfer in Power-Law Fluids

# publisherOf[].label
AUTOMATED GRAPH GRAMMAR GENERATION FOR ENGINEERING DESIGN WITH FREQUENT PATTERN MINING

# publisherOf[].label
Modeling of the Onset of Gas Entrainment From a Stratified Two-Phase Region Through Branches on a Curved Surface

# publisherOf[].label
LAMINAR FLAME SPEED AND IGNITION DELAY TIME DATA FOR THE KINETIC MODELING OF HYDROGEN AND SYNGAS FUEL BLENDS

# publisherOf[].label
COMBINED EFFECTS OF JET PLATE THICKNESS AND FILLET RADIUS ON LEADING EDGE JET IMPINGEMENT WITH ROUND AND RACETRACK SHAPED JETS

# publisherOf[].label
Layer-wise Anomaly Detection in Laser Powder-bed Fusion Metal Additive Manufacturing

# publisherOf[].label
USING SUPPORT VECTOR MACHINES TO FORMALIZE THE VALID INPUT DOMAIN OF MODELS IN DATA-DRIVEN PREDICTIVE MODELING FOR SYSTEMS DESIGN

# publisherOf[].label
EXPERIMENTAL OBSERVATIONS ON THE CENTRAL NERVOUS SYSTEM'S GOVERNING STRATEGIES ON THE ARM REACHING WITH REDUCED MOBILITY

# publisherOf[].label
MODELING THE EFFECTS OF HEAT TRANSFER PROCESSES ON MATERIAL STRAIN AND TENSION IN ROLL TO ROLL MANUFACTURING

# publisherOf[].label
Critical Heat Flux Prediction and Uncertainty Quantification with Bayesian Optimized Deep Ensemble

# publisherOf[].label
Elasto-viscoplastic dispersive waves in silicon wafers

# publisherOf[].label
A numerical study of flow and heat transfer in rotating rectangular channels (AR=4) with 45 deg rib turbulators by Reynolds stress turbulence model

# publisherOf[].label
OPTIMIZATION OF A COMPOSITE MORPHING WING WITH SHAPE MEMORY ALLOY TORSIONAL ACTUATORS

# publisherOf[].label
CONCEPTUAL DESIGN OF A FORMULA HYBRID POWERTRAIN SYSTEM UTILIZING FUNCTIONALITY-BASED MODELING TOOLS

# publisherOf[].label
Exploring System of Systems Resilience vs. Affordability Trade-Space Using a Bio-Inspired Metric

# publisherOf[].label
An Electromechanical Simulation Method for Active Vibration Control of a Magnetic Bearing Supported Rotor

# publisherOf[].label
Effects of wall flexibility on the rotordynamic coefficients of turbulent cryogenic annular seals

# publisherOf[].label
iFEED: Interactive Feature Extraction for Engineering Design

# publisherOf[].label
Effect of Strain Nodes and Electrode Configuration on Piezoelectric Energy Harvesting From Cantilevered Beams

# publisherOf[].label
LEVERAGING LOGGED INTERMEDIATE DESIGN ATTRIBUTES FOR IMPROVED KNOWLEDGE DISCOVERY IN ENGINEERING DESIGN

# publisherOf[].label
Flow Induced Cylinder Oscillation and Its Control With High Order Spectral Difference Method on Deformable Mesh

# publisherOf[].label
Analyses of Dynamic Ductile Crack Growth

# publisherOf[].label
Optimization of trailing edge ejection mixing losses: A theoretical and experimental study

# publisherOf[].label
Experimental Rotordynamic Coefficient Results for Teeth-on-Rotor and Teeth-on-Stator Labyrinth Gas Seals

# publisherOf[].label
REVIEW OF STATE-LEVEL LOAN AND GRANT FUNDING PROGRAMS FOR LOCAL FREIGHT RAIL INFRASTRUCTURE

# publisherOf[].label
Prediction of viscous ship roll damping by unsteady Navier-Stokes techniques

# publisherOf[].label
Supporting Designer Learning and Performance in Design Space Exploration: A Goal-Setting Approach

# publisherOf[].label
LOCAL HEAT-TRANSFER IN ENCLOSED CO-ROTATING DISKS WITH AXIAL THROUGHFLOW

# publisherOf[].label
TOWARDS HIGH ENERGY DENSITY, HIGH CONDUCTIVITY THERMAL ENERGY STORAGE COMPOSITES

# publisherOf[].label
THERMAL INFLUENCE ON PRINTLET QUALITY IN THE SELECTIVE LASER SINTERING OF PHARMACEUTICAL FORMULATIONS

# publisherOf[].label
COMPUTATIONAL ANALYSIS OF FLUID FLOW IN PEBBLE BED MODULAR REACTOR USING DIFFERENT TURBULENCE MODELS

# publisherOf[].label
AUTONOMOUS LIGHTING AUDITS: PART 2-LIGHT IDENTIFICATION AND ANALYSIS

# publisherOf[].label
Using Support Vector Machines to Formalize the Valid Input Domain of Predictive Models in Systems Design Problems

# publisherOf[].label
Heat Transfer Characteristics of Turbulent Flow in a Square Channel With Angled Discrete Ribs

# publisherOf[].label
The Effects of Temperature, Stress and Salinity on the Creep of Frozen Saline Soil

# publisherOf[].label
TIME-DOMAIN SIMULATION OF MULTIBODY FLOATING SYSTEMS BASED ON STATE-SPACE MODELING TECHNOLOGY

# publisherOf[].label
HERMETICALLY SEALED SQUEEZE FILM DAMPER FOR OPERATION IN OIL-FREE ENVIRONMENTS

# publisherOf[].label
DRY-FRICTION WHIP AND WHIRL PREDICTIONS FOR A ROTOR-STATOR MODEL WITH RUBBING CONTACT AT TWO LOCATIONS

# publisherOf[].label
Closure to Discussion of Eccentricity Effects on the Rotordynamic Coefficients of Plain Annular Seals: Theory Versus Experiment (1997, ASME J. Tribol., 119, pp. 447448)

# publisherOf[].label
Computational Evaluation of Thermal Barrier Coatings: Two-Phase Thermal Transport Analysis

# publisherOf[].label
Numerical Simulations and Experimental Characterization of Heat Transfer From a Periodic Impingement of Droplets

# publisherOf[].label
Effects of Chip Seizure on Steady State Motion of a Machine-Tool

# publisherOf[].label
COMPARISON OF PEBBLE BED VELOCITY PROFILES BETWEEN HIGH-FIDELITY AND INTERMEDIATE-FIDELITY CODES

# publisherOf[].label
Three-Dimensional Stereo Measurements in Bubbly Pipe Flows With Particle Tracking Velocimetry

# publisherOf[].label
Design and Optimization of an SMA-Based Self-Folding Structural Sheet With Sparse Insulating Layers

# publisherOf[].label
Heat Transfer and Flow Field Characteristics of Variable Aspect Ratio, Serpentine Passages

# publisherOf[].label
Bayesian Inference Calibration of Building Energy Models for Arid Weather

# publisherOf[].label
Study of insertion force and deformation for suturing with precurved NiTi guidewire.

# publisherOf[].label
Generative Infills for Additive Manufacturing Using Space-Filling Polygonal Tiles

# publisherOf[].label
Robust Adaptive Control of Mildly Nonlinear Systems With Time Varying Input/Output Delays

# publisherOf[].label
Utilization of Plutonium and Higher Actinides in the HTGR as Possibility to Maintain Long-Term Operation on One Fuel Loading

# publisherOf[].label
Assessment of steady state PSP and transient IR measurement techniques for leading edge film cooling

# publisherOf[].label
Compliant Hybrid Gas Bearing Using Modular Hermetically Sealed Squeeze Film Dampers

# publisherOf[].label
MODELS FOR PREDICTION OF SOILING-CAUSED PHOTOVOLTAIC POWER OUTPUT DEGRADATION BASED ON ENVIRONMENTAL VARIABLES IN DOHA, QATAR

# publisherOf[].label
An Analysis of Polymer Coated Metal Rod Extrusion

# publisherOf[].label
Effect of Turbulator Width and Spacing on the Thermal Performance of Angled Ribs in a Rectangular Channel (AR=3:1)

# publisherOf[].label
Rotordynamic coefficients for a tooth-on-stator labyrinth seal at 70 bar supply pressures: Measurements versus theory and comparisons to a hole-pattern stator seal

# publisherOf[].label
A Damage Mechanics Based Approach to Durability Assessment of Composite Materials

# publisherOf[].label
Practical Airgap Prediction for Offshore Structures

# publisherOf[].label
Test Results for Sawtooth-Pattern Damper Seals: Leakage and Rotordynamic Coefficients

# publisherOf[].label
Design Manifolds Capture the Intrinsic Complexity and Dimension of Design Spaces

# publisherOf[].label
EDDY-CURRENT EFFECTS ON THE DESIGN OF ROTOR-MAGNETIC BEARING SYSTEMS

# publisherOf[].label
Damage Mechanisms in Nanolayered Metallic Composites

# publisherOf[].label
MEASUREMENT VERSUS PREDICTIONS OF ROTORDYNAMIC COEFFICIENTS OF A HOLE-PATTERN GAS SEAL WITH NEGATIVE PRESWIRL

# publisherOf[].label
INVESTIGATION OF THE DYNAMICS OF INCOMPRESSIBLE FLOW IN DOMAINS OF MULTIPLE CLOSE-PACKED SPHERES

# publisherOf[].label
The Effect of Honeycomb Relative Density on Its Effective Elastic Properties: A Theoretical and Experimental Study

# publisherOf[].label
Film Cooling Effectiveness Distributions on a Turbine Blade Cascade Platform With Stator-Rotor Purge and Discrete Film Hole Flows

# publisherOf[].label
COMPUTATIONAL DESIGN OF A RECONFIGURABLE ORIGAMI SPACE STRUCTURE INCORPORATING SHAPE MEMORY ALLOY THIN FILMS

# publisherOf[].label
Additively Manufactured Compliant Hybrid Gas Thrust Bearing for sCO2 Turbomachinery: Experimental Evaluation and Fluid-Structure Model Predictions

# publisherOf[].label
Strength and Fracture of a Multifunctional Polystyrene Nanocomposite

# publisherOf[].label
Study of a Microfluidic System Based One-Step Blood Cell-Free Region for Biomarker Detection

# publisherOf[].label
IDENTIFICATION AND QUANTIFICATION OF RESIDUAL STRAINS DURING CURING OF CARBON FIBER EPOXY LAMINATES

# publisherOf[].label
Nonlinear Model Reference Adaptive Control for Limit Cycle Oscillations

# publisherOf[].label
Ground-Based Response of a Spinning, Cyclic Symmetric Rotor Assembled to a Flexible Stationary Housing via Multiple Bearings

# publisherOf[].label
Identification of force coefficients in a squeeze film damper with a mechanical end seal - Centered circular orbit tests

# publisherOf[].label
An Exact Robust Differentiator Based on Continuous Fractional Sliding Modes

# publisherOf[].label
On the Leakage and Dynamic Force Coefficients of a Novel Stepped Shaft Pocket Damper Seal: Experimental and Numerical Verification

# publisherOf[].label
Overview of the Development and Enforcement of Process-Driven Manufacturability Constraints in Product Design

# publisherOf[].label
NoodlePrint: Cooperative Multi-Robot Additive Manufacturing With Helically Interlocked Tiles

# publisherOf[].label
Rotordynamic Morton Effect Simulation With Transient, Thermal Shaft Bow

# publisherOf[].label
Heat transfer in a two-pass rectangular channel (AR=1 : 4) under high rotation numbers

# publisherOf[].label
The Correlation of the Volumetric Wear Rate of Turning Tool Inserts With Carbide Grain Sizes

# publisherOf[].label
A Stabilization of Fixed Gain Controlled Infinite Dimensional Systems by Augmentation With Direct Adaptive Control

# publisherOf[].label
Modeling of a Membrane Mirror Strip Actuated Using a Piezoelectric Bimorph

# publisherOf[].label
Experimental Study of a Single Microchannel Flow Under Nonuniform Heat Flux

# publisherOf[].label
An Evaluation of Passive Wall Treatment With Circumferential Grooves in a High-Performance Multi-Stage Axial Compressor

# publisherOf[].label
TURNING REGION HEAT TRANSFER IN FIVE, STATIONARY AND ROTATING, MULTI-PASS CHANNELS WITH VARIOUS ASPECT RATIOS

# publisherOf[].label
Study of Compact Heat Exchangers Operating in Self-Sustained Oscillatory Flows

# publisherOf[].label
Real-Time Estimation of Mean Remaining Life Using Sensor-Based Degradation Models

# publisherOf[].label
Unsteady Wake Over a Linear Turbine Blade Cascade With Air and CO2 Film Injection: Part I  Effect on Heat Transfer Coefficients

# publisherOf[].label
Rheological and Wall-Slip Behaviors of Polymer Based Drilling Foams

# publisherOf[].label
The Space Shuttle Main Engine High-Pressure Fuel Turbopump Rotordynamic Instability Problem

# publisherOf[].label
ADDITIVE MANUFACTURING FOR CIVIL INFRASTRUCTURE DESIGN AND CONSTRUCTION: CURRENT STATE AND GAPS

# publisherOf[].label
Expensive Black-Box Model Optimization via a Gold Rush Policy

# publisherOf[].label
Investigation of Cooling Performance of a Swirl Microchannel Heat Sink by Numerical Simulation

# publisherOf[].label
Reduction of vortex-driven oscillations in a choked duct through active control

# publisherOf[].label
The effects of compression ratio and expansion ratio on engine performance including the second law of thermodynamics: Results from a cycle simulation

# publisherOf[].label
Investigation of Buoyancy Effects on Heat Transfer Characteristics of Supercritical Carbon Dioxide in Heating Mode

# publisherOf[].label
Functional Decomposition in Engineering: A Survey

# publisherOf[].label
ADAPTING ADA ARCHITECTURAL DESIGN KNOWLEDGE TO PRODUCT DESIGN: GROUNDWORK FOR A FUNCTION BASED APPROACH

# publisherOf[].label
Modeling of the Onset of Gas Entrainment From a Stratified Two-Phase Region Through Two Side Branches

# publisherOf[].label
Development of two-dimensional wakes within curved channels: Theoretical framework and experimental investigation

# publisherOf[].label
DRILLSTRING SIMULATOR: A NOVEL SOFTWARE MODEL FOR STICK-SLIP AND BIT-BOUNCE VIBRATIONS

# publisherOf[].label
An Experimental Performance Evaluation of a Cold-Region Photovoltaic System With Tracking

# publisherOf[].label
Direct Numerical Simulation of the Flow Through a Structured Pebble Bed Near a Wall Boundary

# publisherOf[].label
Heat Transfer in a Rotating, Blade-Shaped, Two-Pass Cooling Channel With a Variable Aspect Ratio

# publisherOf[].label
Development of Framework to Examine the Focal Association Between Wall Shear Stress and Coronary Artery Disease Progression in the Clinical Setting

# publisherOf[].label
A COMPREHENSIVE STUDY OF ASYMMETRIC MICRO-DROPLET SPLITTING IN T-JUNCTION

# publisherOf[].label
CYCLIC VARIABILITY IN DIESEL/GASOLINE DUAL-FUEL COMBUSTION ON A MEDIUM-DUTY DIESEL ENGINE

# publisherOf[].label
A gas-surface interaction model for spatial and time-dependent friction coefficient in reciprocating contacts: Applications to near-frictionless carbon

# publisherOf[].label
t-METASET: Task-Aware Acquisition of Metamaterial Datasets Through Diversity-Based Active Learning

# publisherOf[].label
Transmural LV Systolic Wall Thickening Gradients and Models of Heart Wall Mechanics

# publisherOf[].label
Heat Transfer in Water-Cooled Silicon Carbide Milli-Channel Heat Sinks for High Power Electronic Applications

# publisherOf[].label
Numerically Investigating the Effects of Cross-Links in Scaled Microchannel Heat Sinks

# publisherOf[].label
Prediction of dry-friction whirl and whip between a rotor and a stator

# publisherOf[].label
USING A PRINCIPAL-AGENT MODEL TO INVESTIGATE DELEGATION IN SYSTEMS ENGINEERING

# publisherOf[].label
Modeling Unsteady Boundary Layer Transition on a Curved Plate Under Periodic Unsteady Flow Conditions: Aerodynamic and Heat Transfer Investigations

# publisherOf[].label
Creating Reduced Kinetics Models That Satisfy the Entropy Inequality

# publisherOf[].label
On the characteristics and mechanism of rolling instability and chatter

# publisherOf[].label
Discrete-Time Adaptive Fractional Nonlinear Control Using Fuzzy Rules Emulating Networks

# publisherOf[].label
Combined steady state and transient analysis of a patrol vessel as affected by varying amounts of damping and periodic and random wave excitation

# publisherOf[].label
Anomalous Diffusion in Short-Pulse Laser Interactions With Random Media

# publisherOf[].label
CFD SIMULATION OF A COOLANT FLOW AND A HEAT TRANSFER IN A PEBBLE BED REACTOR

# publisherOf[].label
Numerical Simulation of Flow and Heat Transfer in Rotating Cooling Passage With Turning Vane in Hub Region

# publisherOf[].label
Discussion of "A Review of Thickness-Accommodation Techniques in Origami-Inspired Engineering" (Lang, RJ, Tolman, KA, Crampton, EB, Magleby, SP, and Howell, LL, 2018, ASMEAppl. Mech. Rev., 70(1), p. 010805

# publisherOf[].label
Thrust Force Characterization of Oscillating Cantilevers Operating Near Resonance

# publisherOf[].label
RELATION BETWEEN FLOW VELOCITY AND IMPACT PRESSURE IN A GREEN WATER FLOW

# publisherOf[].label
Modulation of Diastolic Filling Using an Epicardial Diastolic Recoil Device

# publisherOf[].label
Modeling the pneumatic subsystem of an S-cam air brake system

# publisherOf[].label
MODELING THE EFFECT OF OXIDATION ON DAMAGE IN SIC TI-15-3 METAL-MATRIX COMPOSITES

# publisherOf[].label
Stress-Strain Behavior of Perfluorosulfonic Acid Membranes at Various Temperatures and Humidities: Experiments and Phenomenological Modeling

# publisherOf[].label
HEAT TRANSFER MEASUREMENTS IN ROTATING BLADE-SHAPE SERPENTINE COOLANT PASSAGE WITH RIBBED WALLS AT HIGH REYNOLDS NUMBERS

# publisherOf[].label
Formation of a group of vehicles with full information using constraint forces

# publisherOf[].label
Damage Initiation and Evolution in Woven Composites

# publisherOf[].label
PIEZOELECTRIC SUBORDINATE OSCILLATOR ARRAYS: PERFORMANCE RECOVERY AND ROBUSTNESS TO UNCERTAINTY

# publisherOf[].label
MEASUREMENTS OF FLOW MODIFICATION BY PARTICLE DEPOSITION INSIDE A PACKED BED USING TIME-RESOLVED PIV

# publisherOf[].label
Nonlinear NWT Simulation for Oscillating-Water-Column Wave Energy Converter

# publisherOf[].label
Exercise Can Reverse the Phenotype of Biglycan Deficient Mice

# publisherOf[].label
High-Temperature Ignition Kinetics of Gas Turbine Lubricating Oils

# publisherOf[].label
Kinematics and Dynamics of a Sliding/Bouncing Two Mass System

# publisherOf[].label
CO Laser Absorption Measurements During Syngas Combustion at High Pressure

# publisherOf[].label
Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing-Part I: Static Response

# publisherOf[].label
A perspective on methods for analysis of measured energy data from commercial buildings

# publisherOf[].label
Effect of Reynolds number and periodic unsteady wake flow condition on boundary layer development, separation, and re-attachment along the suction surface of a low pressure turbine blade

# publisherOf[].label
DEVELOPMENT AND TESTING OF AN AUTOMATED BUILDING COMMISSIONING ANALYSIS TOOL (ABCAT)

# publisherOf[].label
Phase Change Material Behavior in Finite Thickness Slabs Under a Step Response Heat

# publisherOf[].label
Heat Transfer Enhancement in a Rectangular Cooling Channel With Airfoil Shaped Fins

# publisherOf[].label
Computational Investigation of Dynamic Properties of Actin Networks With Crosslinking Proteins

# publisherOf[].label
Clearance Effects on Rotordynamic Performance of a Long Smooth Seal With Two-Phase, Mainly-Air Mixtures

# publisherOf[].label
A Review of the Rotordynamic Thermally Induced Synchronous Instability (Morton) Effect

# publisherOf[].label
Shape Memory Polymer Foam/PEG Hydrogel Composite Lung Biopsy Sealants with Multimodal Contrast

# publisherOf[].label
Optimization of Power Control for Autonomous Hybrid Electric Vehicles With Flexible Power Demand

# publisherOf[].label
Effects of dressing type on 3D tissue microdeformations during negative pressure wound therapy: a computational study.

# publisherOf[].label
Pressure Measurements in a Wire-Wrapped 61-Pin Hexagonal Fuel Bundle

# publisherOf[].label
Active Control of Cantilevered Pipes Conveying Fluid With Constraints on Input Energy

# publisherOf[].label
Discussion of "Non-Axisymmetric Flows and Rotordynamic Forces in an Eccentric Shrouded Centrifugal Compressor-Part 2: Analysis" (Song, J., and Song S. J., ASME J. Eng. Gas Turbines Power, 141(11), p. 111015)

# publisherOf[].label
A Computational Approach to Conceptual Design

# publisherOf[].label
Influence of Shearing Surface Topography on Frictional Properties of ZnS Nanowire-Based Lubrication System across Ductile Surfaces

# publisherOf[].label
Heat transfer in trailing edge, wedge-shaped cooling channels under high rotation numbers

# publisherOf[].label
AERODYNAMIC AND STRUCTURAL EVALUATION OF AN SMA SLAT-COVE FILLER USING COMPUTATIONAL AND EXPERIMENTAL TOOLS AT MODEL SCALE

# publisherOf[].label
Combined effect of grid turbulence and unsteady wake on film effectiveness and heat transfer coefficient of a gas turbine blade with air and CO2 film injection

# publisherOf[].label
Heat Transfer in Rotating, Trailing-Edge, Converging Channels With Smooth Walls and Pin-Fins

# publisherOf[].label
A NEW, ITERATIVE, SYNCHRONOUS-RESPONSE ALGORITHM FOR ANALYZING THE MORTON EFFECT

# publisherOf[].label
Nonlinear Deformations of Cantilever Beams with Piezoelectric Patches

# publisherOf[].label
On the Development of Incompressible Round and Equilateral Triangular Jets Due to Reynolds Number Variation

# publisherOf[].label
Friction Factor Behavior From Flat-Plate Tests of Smooth and Hole-Pattern Roughened Surfaces With Supply Pressures up to 84 bars

# publisherOf[].label
Transit Draft Heave and Pitch Motion Analysis of the Mobile Offshore Base (MOB) Using Reverse MI/SO Techniques

# publisherOf[].label
Understanding Product Similarity Using Customer Needs

# publisherOf[].label
Empirical Studies of Design Ideation: Alignment of Design Experiments With Lab Experiments

# publisherOf[].label
Directed Particle Motion Driven by Superimposed Two-Dimensional Traveling Waves

# publisherOf[].label
Simulation of unsteady incompressible viscous flow using higher order implicit Runge-Kutta methods - Staggered grid

# publisherOf[].label
Cooling Capacity Figure of Merit for Phase Change Materials

# publisherOf[].label
Bayesian Calibrating Educational Building Thermal Models to Hourly Indoor Air Temperature: Methodology and Case Study

# publisherOf[].label
Three-Dimensional Printing of Hydrogel Filters Containing Algae Cells for Copper Removal From Contaminated Water

# publisherOf[].label
Strain Capacity of X70 Pipeline Steel Subjected to Biaxial Loading Condition

# publisherOf[].label
Computationally Efficient Down-Hole Drilling System Dynamics Modeling Integrating Finite Element and Transfer Matrix

# publisherOf[].label
ANALYTICAL SOLUTION FOR PSEUDOELASTIC RESPONSE OF A SHAPE MEMORY ALLOY THICK-WALLED CYLINDER UNDER INTERNAL PRESSURE

# publisherOf[].label
Rigorous Code Verification: An Additional Tool to Use With the Method of Manufactured Solutions

# publisherOf[].label
Analytical Modeling of Annular Flow Boiling Heat Transfer in Mini- and Microchannel Heat Sinks

# publisherOf[].label
Direct Numerical Simulation of Pebble Bed Flows: Database Development and Investigation of Low-Frequency Temporal Instabilities

# publisherOf[].label
Experimental heat transfer in a rotating triangular duct: Effect of model orientation

# publisherOf[].label
Experimental Investigation of a Bubbly Flow by Means of an Image Analysis Technique

# publisherOf[].label
THE STATE OF THE ART OF ORIGAMI-INSPIRED PRODUCTS: A REVIEW

# publisherOf[].label
Effects of stent design parameters on normal artery wall mechanics.

# publisherOf[].label
Boundary Layer Receptivity to Sound: Navier-Stokes Computations

# publisherOf[].label
Rotordynamic Stability Effects of Shrouded Centrifugal Impellers With Combined Whirl and Precession

# publisherOf[].label
ON THE COMPETITION BETWEEN FAILURE AND INSTABILITY IN PROGRESSIVELY SOFTENING SOLIDS

# publisherOf[].label
Tuning of a Rigid-Body Dynamics Model of a Flapping Wing Structure With Compliant Joints

# publisherOf[].label
Interaction of Ships and Ocean Structures With Ice Loads and Stochastic Ocean Waves

# publisherOf[].label
Aerodynamic Design of Flat Delta Kite Based on Polhamus Concept of Leading Edge Suction Analogy

# publisherOf[].label
A Computational Technique for Concept Generation

# publisherOf[].label
ASYMMETRICAL HEAT DISTRIBUTION PATTERN IN MINATURE HEAT SINKS DUE TO CONJUGATE HEAT TRANSFER

# publisherOf[].label
DEVELOPMENT OF A SMA-BASED, SLAT-COVE FILLER FOR REDUCTION OF AEROACOUSTIC NOISE ASSOCIATED WITH TRANSPORT-CLASS AIRCRAFT, WINGS

# publisherOf[].label
How Work From Home Has Affected the Occupant's Well-Being in the Residential Built Environment: An International Survey Amid the Covid-19 Pandemic

# publisherOf[].label
A Review on Corrosion and Wear of Additively Manufactured Alloys

# publisherOf[].label
An Experimental Study of the Load-Orientation Sensitivity of Three-Lobe Bearings

# publisherOf[].label
MICROWAVE SYNTHESIS OF PLANT-BASED SUPERCAPACITOR ELECTRODES FOR FLEXIBLE ELECTRONICS

# publisherOf[].label
Binary Time Series Prediction Using Recurrent Networks

# publisherOf[].label
Active vibration control of rotating machinery with a hybrid piezohydraulic actuator system

# publisherOf[].label
A Base Study to Investigate MASH Conservativeness of Occupant Risk Evaluation

# publisherOf[].label
PREPARATION OF METAL NANOCOMPOSITE POWDER USING ELECTROLESS PLATING

# publisherOf[].label
TEST-RESULTS FOR ROUND-HOLE-PATTERN DAMPER SEALS - OPTIMUM CONFIGURATIONS AND DIMENSIONS FOR MAXIMUM NET DAMPING

# publisherOf[].label
Analysis of PIV Image Using Modal Wavelet Transform: Proposal of a Modal Wavelet Transform and Application to PIV Image Analysis

# publisherOf[].label
RAPID CHARACTERIZATION OF SHAPE MEMORY ALLOY MATERIAL PARAMETERS USING COMPUTATIONAL INTELLIGENCE METHODS

# publisherOf[].label
Heat transfer coefficients on the squealer tip and near-tip regions of a gas turbine blade with single or double squealer

# publisherOf[].label
Rub-Induced Parametric Excitation in Rotors

# publisherOf[].label
AN EXPERIMENTAL STUDY OF HEAT TRANSFER CHARACTERISTICS OF MICROENCAPSULATED PHASE CHANGE MATERIAL SLURRY IN A COIL HEAT EXCHANGER

# publisherOf[].label
Vibration Modeling and Experimental Results of Two Phase Flow Twin-Screw Pump

# publisherOf[].label
Increasing System Robustness Through a Utility-Based Analysis

# publisherOf[].label
Squeeze Film Damper Suppression of Thermal Bow-Morton Effect Instability

# publisherOf[].label
Computational Studies of Interfacial Reactions at Anode Materials: Initial Stages of the Solid-Electrolyte-Interphase Layer Formation

# publisherOf[].label
A Comparative Numerical Study of Aerodynamics and Heat Transfer on Transitional Flow Around a Highly Loaded Turbine Blade with Flow Separation Using RANS, URANS and LES

# publisherOf[].label
Study of cubic splines and Fourier series as interpolation techniques for filling in short periods of missing building energy use and weather data

# publisherOf[].label
Flow and heat transfer in a rotating square channel with 45 deg angled ribs by Reynolds stress turbulence model

# publisherOf[].label
Organic Solar Cell With Carbon Nanotube Anode

# publisherOf[].label
Orientation Effects on Fatigue Behavior of Additively Manufactured Stainless Steel

# publisherOf[].label
Extending Classical Friction Loss Modeling to Predict the Viscous Performance of Pumping Devices

# publisherOf[].label
A Technique for Producing Ice From NaCl Brine for Studying Fundamental Deformation Behavior

# publisherOf[].label
Probing the Accuracy of Experimental Data on Nusselt Numbers Within Miniature Heat Sinks

# publisherOf[].label
STRUCTURE OF WATER HYDRATION AROUND COLLAGEN

# publisherOf[].label
Computational Study of the Effects of Shock Waves on Film Cooling Effectiveness

# publisherOf[].label
Vascular Fluid Damping of Flexible Multifunctional Composite Cantilevers: Experiment, Modeling and Analysis

# publisherOf[].label
Sensor Fault Diagnosis in Smart Structures

# publisherOf[].label
APPLICATION OF NANOFLUIDS IN A SHELL-AND-TUBE HEAT EXCHANGER

# publisherOf[].label
Experimental Study of the Nano-Fin Effect (nFE) During Thin Film Evaporation From Nanopores in Anodic Aluminum Oxide (AAO) Membrane Substrates Integrated With Nano-Thermocouple / Thin Film Thermocouple (TFT) Array

# publisherOf[].label
Synthesizing Designs With Inter-Part Dependencies Using Hierarchical Generative Adversarial Networks

# publisherOf[].label
Efficient Parametric Optimization for Expensive Single Objective Problems

# publisherOf[].label
Experimental rotordynamic coefficient results for (a) a labyrinth seal with and without shunt injection and (b) a honeycomb seal

# publisherOf[].label
Waste Heat Recovery Potential of Advanced Internal Combustion Engine Technologies

# publisherOf[].label
Fabrication of Graphene Reinforced Aluminum Composite by Semi-Solid Processing

# publisherOf[].label
EFFECT OF RIB SPACING ON HEAT TRANSFER IN A TWO-PASS RECTANGULAR CHANNEL (AR=1:4) WITH A SHARP ENTRANCE AT HIGH ROTATION NUMBERS

# publisherOf[].label
Theory and Test Correlation for Laminate Stacking Factor Effect on Homopolar Bearing Stiffness

# publisherOf[].label
Development of a Mobile Robot Providing a Natural Way to Interact With Electronic Devices

# publisherOf[].label
Constitutive Modeling of Asphalt Bound Granular Materials: Theoretical Background

# publisherOf[].label
A Procedure for the Pre-Conceptual Design of Fast Reactors and Application to a Gas-Cooled Sub-Critical Transmuter

# publisherOf[].label
DEPOSITION VELOCITY AND PENETRATION EFFICIENCY IN A SQUARE CHANNEL USING A LAGRANGIAN-BASED MODELING APPROACH

# publisherOf[].label
Finite Element Modeling of the Workpiece Thermal Distortion in MQL Deep-Hole Drilling

# publisherOf[].label
Leading Edge Jet Impingement Under High Rotation Numbers

# publisherOf[].label
A Combined Numerical and Experimental Study of the Effect of Non-Axisymmetric Contouring on Performance and Film Cooling Behavior of a Rotating Turbine Endwall

# publisherOf[].label
Visualization of the Evaporating Liquid-Vapor Interface in Micropillar Arrays

# publisherOf[].label
Experimental leakage and rotordynamic results for helically grooved annular gas seals

# publisherOf[].label
UPLIFT CAPACITY OF SUCTION CAISSONS IN SAND FOR GENERAL CONDITIONS OF DRAINAGE

# publisherOf[].label
Assigning Students Teachers Role: A Student-Centered Approach in Computer-Aided Design Education

# publisherOf[].label
DESIGN OF MOORING LINES FOR DEEP-WATER APPLICATIONS

# publisherOf[].label
Computational Aerodynamics: Solvers and Shape Optimization

# publisherOf[].label
Computational Fluid Dynamics-Machine Learning Prediction of Machinery Coupling Windage Heating and Power Loss

# publisherOf[].label
Dry-Friction Whirl and Whip Between a Rotor and a Stator: Effect of Rotor-Stator Coupling Due to Seals and Rotor Rigid-Body Dynamics

# publisherOf[].label
Thermodynamic Considerations Regarding the Use of Exhaust Gas Recirculation for Conventional and High Efficiency Engines

# publisherOf[].label
Compact Nonlinear Signal Representation in Machine Tool Operations

# publisherOf[].label
Experimentally tractable, pseudo-elastic constitutive law for biomembranes: II. Application.

# publisherOf[].label
Numerical Simulations of Two-Stroke Cycle Engines Using Coal Fuels

# publisherOf[].label
Relating Entropy Flux With Heat Flux in Two-Temperature Thermodynamic Model for Metal Thermoviscoplasticity

# publisherOf[].label
Testing State-Space Controls for the Controls Advanced Research Turbine

# publisherOf[].label
Systematic Design of a Piezo-Electric Stack Energy Harvester From Walking Locomotion

# publisherOf[].label
Characterization of thermal properties and heat transfer behavior of microencapsulated phase change material slurry and multiwall carbon nanotubes in aqueous suspension

# publisherOf[].label
Impact of Tool Geometry on Cutting Dynamics

# publisherOf[].label
SPRAY CHARACTERISTICS OF FISCHER-TROPSCH ALTERNATE JET FUELS

# publisherOf[].label
Catcher Bearing Life Prediction Using a Rainflow Counting Approach

# publisherOf[].label
Modeling and Multivariable Control of a High Precision Multidimensional Positioner

# publisherOf[].label
TIME-RESOLVED STUDY OF LASER-INDUCED BUBBLES AND SHOCKWAVES IN AGAR GEL TISSUE PHANTOMS

# publisherOf[].label
Predicted Rotordynamic Behavior of a Labyrinth Seal as Rotor Surface Speed Approaches Mach 1

# publisherOf[].label
Advances in Nonlinear Dynamic Engine Simulation With an Example: Dynamic Performance Behavior of a Gas Turbine With One Reheat Turbine Stage and Two Combustion Chambers

# publisherOf[].label
Nonlinear Control Methods for High Energy Limit Cycle Oscillations

# publisherOf[].label
Study and Analysis of a Power Turbine Preliminary Design for a Small Turboshaft

# publisherOf[].label
Creation of an OpenFOAM Fuel Performance Class Based on FRED and Integration Into the GeN-Foam Multi-Physics Code

# publisherOf[].label
Experimental Investigation of Double Rows Film Cooling on Vane Pressure Side

# publisherOf[].label
Uniaxial Tension of a Class of Compressible Solids With Plastic Non-Normality

# publisherOf[].label
SIMULATION OF WIND FARM OPERATIONS AND MAINTENANCE

# publisherOf[].label
NONLINEAR CONTROL OF A DISTRIBUTED SYSTEM - SIMULATION AND EXPERIMENTAL RESULTS

# publisherOf[].label
Additional Test Results for Round-Hole-Pattern Damper Seals: Leakage, Friction Factors, and Rotordynamic Force Coefficients

# publisherOf[].label
Coolant Channel and Flow Characteristics of MQL Drill Bits: Experimental and Numerical Analyses

# publisherOf[].label
A Study on Outcome Framing and Risk Attitude in Engineering Decisions Under Uncertainty

# publisherOf[].label
Interfacial Thermal Resistance Between a Carbon Nanoparticle and Molten Salt Eutectic: Effect of Material Properties, Particle Shapes and Sizes

# publisherOf[].label
The Influence of In Situ Reheat on Turbine-Combustor Performance

# publisherOf[].label
CALCULATION OF TURBULENT KINETIC ENERGY BUDGETS FOR FLOW THROUGH A PEBBLE BED USING DNS

# publisherOf[].label
Wave Runup on Cylinders Subject to Deep Water Random Waves

# publisherOf[].label
LARGE EDDY SIMULATION OF 5-TUBE BUNDLE HELICAL COIL STEAM GENERATOR TEST SECTION

# publisherOf[].label
Propeller Design Methods: An Overview, From Classic Theories to Modern Propeller Design Techniques

# publisherOf[].label
A STUDY ON THE LEAKAGE AND ROTORDYNAMIC COEFFICIENTS OF A LONG-SMOOTH SEAL WITH LAMINAR-TWO-PHASE, MAINLY-OIL MIXTURES

# publisherOf[].label
System Identification and Multivariate Controller Design for a Satellite Ultraquiet Isolation Technology Experiment (SUITE)

# publisherOf[].label
On the Physics of the Flow Separation Along a Low Pressure Turbine Blade Under Unsteady Flow Conditions

# publisherOf[].label
A High Resolution Simulation of a Single Shock-Accelerated Particle

# publisherOf[].label
Dynamic Response Control of Top-Tension Risers by a Variable Damping and Stiffness System With Magneto-Rheological Damper

# publisherOf[].label
Dynamic force coefficients of a multiple-blade, multiple-pocket gas damper seal: Test results and predictions

# publisherOf[].label
Characterizing the Onset of Gas Entrainment in a Single Discharging Bottom Branch Through Flow Visualization

# publisherOf[].label
Collaborative Mind-Mapping: A Study of Patterns, Strategies, and Evolution of Maps Created by Peer-Pairs

# publisherOf[].label
Optimization of Confined Laminar Natural Convection for Dry Cask Storage Systems

# publisherOf[].label
A Perspective on Plasticity, Dissipation and the Second Law of Thermodynamics

# publisherOf[].label
Measurements Versus Predictions for Rotordynamic Characteristics of a Flexure Pivot-Pad Tilting Pad Bearing in an LBP Condition at Higher Unit Loads

# publisherOf[].label
Progressive Damage Simulation of Thick Viscoelastic Laminate With Homogenization Technique

# publisherOf[].label
ON THE SOLUTIONS TO FORCED MOTIONS OF RECTANGULAR COMPOSITE PLATES

# publisherOf[].label
The Correlation of Volumetric Tool Wear and Wear Rate of Machining Tools With the Material Removal Rate of Titanium Alloys

# publisherOf[].label
CONTROLLING BIFURCATION AND DYNAMIC BEHAVIOR IN VIBRO-IMPACT SYSTEM

# publisherOf[].label
Comparative Study Between Structured and Unstructured Meshes Applied in Turbopumps Hydraulic Turbine

# publisherOf[].label
Double Overhung Disk and Parameter Effect on Rotordynamic Synchronous Instability-Morton Effect-Part I: Theory and Modeling Approach

# publisherOf[].label
USE OF SIMPLIFIED SYSTEM MODELS TO MEASURE RETROFIT ENERGY SAVINGS

# publisherOf[].label
COMPARATIVE LIFT-OFF PERFORMANCE IN FLEXURE PIVOT PAD AND HYBRID (HYDROSTATIC AND HYDRODYNAMIC) BEARINGS WITH WATER AS THE TEST FLUID

# publisherOf[].label
Numerical Modeling of Nanofluid Thermal Conductivity: The Effect of Nanonetwork on Thermal Transport Behavior

# publisherOf[].label
FRICTION-FACTOR CHARACTERISTICS FOR NARROW CHANNELS WITH HONEYCOMB SURFACES

# publisherOf[].label
Using Simulator Data to Facilitate Human Reliability Analysis

# publisherOf[].label
THERMAL EFFECTS IN CRYOGENIC LIQUID ANNULAR SEALS .2. NUMERICAL-SOLUTION AND RESULTS

# publisherOf[].label
EXPERIMENTAL INVESTIGATION OF MICRO HEAT PIPES FABRICATED IN SILICON-WAFERS

# publisherOf[].label
A General-Purpose Test Facility for Evaluating Gas Lubricated Thrust Bearings

# publisherOf[].label
A Finite Element Approach to Pad Flexibility Effects in Tilt Pad Journal Bearings: Part IIAssembled Bearing and System Analysis

# publisherOf[].label
Effect of Reflection and Incubation on Artificial-Intelligence-Assisted Design Space Exploration

# publisherOf[].label
Heat Transfer, Pressure Drop, and Mass Flow Rate in Pin Fin Channels With Long and Short Trailing Edge Ejection Holes

# publisherOf[].label
A New, Iterative, Synchronous-Response Algorithm for Analyzing the Morton Effect

# publisherOf[].label
TOWARD CONSIDERING RISK ATTITUDES IN ENGINEERING ORGANIZATIONS USING UTILITY THEORY

# publisherOf[].label
EVALUATION OF GRADE CROSSING HAZARD RANKING MODELS

# publisherOf[].label
IDENTIFYING PRODUCT SCALING PRINCIPLES: A STEP TOWARDS ENHANCING BIOMIMETIC DESIGN

# publisherOf[].label
Optimization of a Bend-Twist-and-Sweep Compliant Mechanism

# publisherOf[].label
SENSITIVITY ANALYSIS OF A PWR RESPONSE DURING A LOSS OF COOLANT ACCIDENT UNDER A HYPOTHETICAL CORE BLOCKAGE SCENARIO USING RELAP5-3D

# publisherOf[].label
Ignition of Aged Lubricants in a Shock Tube

# publisherOf[].label
WAVE-ISLAND INTERACTIONS ABOUT CIRCULAR ARTIFICIAL ISLANDS

# publisherOf[].label
Comparisons of Overall Performance Among Double-Jet Film Cooling Holes, Cylinder Holes, and Fan-Shaped Holes

# publisherOf[].label
EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER IN A LEADING EDGE, TWO-PASS SERPENTINE PASSAGE AT HIGH ROTATION NUMBERS

# publisherOf[].label
EVAPORATOR SUPERHEAT REGULATION VIA EMULATION OF SEMI-ACTIVE FLOW CONTROL

# publisherOf[].label
SIZE-DEPENDENT ANTIBACTERIAL BEHAVIOR OF GRAPHENE QUANTUM DOTS

# publisherOf[].label
Particulate Matter Emissions from Late Injection High EGR Low Temperature Diesel Combustion

# publisherOf[].label
Heat Transfer and Pressure Loss Correlations for Leading Edge, Jet Impingement Using Racetrack-Shaped Jets With Filleted Edges

# publisherOf[].label
A TURBOCHARGED, SPARK-IGNITION ENGINE: RESULTS FROM AN ENGINE CYCLE SIMULATION INCLUDING THE SECOND LAW OF THERMODYNAMICS

# publisherOf[].label
Effect of Strip-Fin Height on Jet Impingement Heat Transfer in a Rectangular Channel With Two Jet-to-Target Surface Spacings

# publisherOf[].label
Translation of Cryobiological Techniques to Socially Economically Deprived PopulationsPart 1: Cryogenic Preservation Strategies

# publisherOf[].label
Networked real-time control strategy dealing with Stochastic time delays and packet losses

# publisherOf[].label
New materials and coatings for superlubricity and near-wearless sliding

# publisherOf[].label
Morton Effect Cyclic Vibration Amplitude Determination for Tilt Pad Bearing Supported Machinery

# publisherOf[].label
Nonlinear State Estimation and Feedback Control of Nonlinear and Bilinear Distributed Parameter Systems

# publisherOf[].label
Numerical Evaluation of the Effect of Ni4Ti3 Precipitates on the Overall Thermo-Mechanical Response of NiTi Shape Memory Alloys

# publisherOf[].label
Precision Control of Force Produced by Ionic Polymer Metal Composite

# publisherOf[].label
Design and Characterization of an Endovascular Mechanical Thrombectomy Device

# publisherOf[].label
Subject-specific finite element modeling of the tibiofemoral joint based on CT, magnetic resonance imaging and dynamic stereo-radiography data in vivo.

# publisherOf[].label
Research Opportunities and Challenges in Engineering System Evolution

# publisherOf[].label
Selective Laser Melting of Stainless Steel 316L for Mechanical Property-Gradation

# publisherOf[].label
A neuro-fuzzy system for tool condition monitoring in metal cutting

# publisherOf[].label
Translating Terms of the Functional Basis Into Biologically Meaningful Keywords

# publisherOf[].label
Simulations and Analysis of the Reshocked Inclined Interface Richtmyer-Meshkov Instability for Linear and Nonlinear Interface Perturbations

# publisherOf[].label
Film Cooling Effectiveness Comparison on Full-Scale Turbine Vane Endwalls Using Pressure-Sensitive Paint Technique

# publisherOf[].label
Modeling the Onset of Gas Entrainment in a Single Downward Discharge From a Stratified Gas-Liquid Region With Liquid Crossflow

# publisherOf[].label
Stented artery biomechanics in the presence of stenoses and tapering

# publisherOf[].label
A Multivariable Numerical Investigation of Wavy-Based Microchannel Heat Sink Geometry Toward Optimal Thermal Performance

# publisherOf[].label
DATA ANALYTICS METHODS FOR WIND ENERGY APPLICATIONS

# publisherOf[].label
A Generalized Approach for Commercial and Industrial Load Shifting Control

# publisherOf[].label
A Virtual Reality Based Decision Support Framework for Manufacturing Simulation

# publisherOf[].label
Self-Propelled Swimming Simulations of Self-Assembling Smart Boxes

# publisherOf[].label
CFD Analysis and Structural Safety Assessment of a Bypass Mitigation Device Used During a Ti-SGTR Accidental Release From a MSSV

# publisherOf[].label
A NONCALORIMETRIC METHOD FOR HEAT-TRANSFER COEFFICIENT MEASUREMENT OF BUILDING THERMAL ENVELOPES

# publisherOf[].label
CRACK GROWTH BEHAVIOR IN NITI SHAPE MEMORY ALLOYS UNDER MODE-I ISOTHERMAL LOADING: EFFECT OF STRESS STATE

# publisherOf[].label
The Effects of Inner-Liquid Motion on LNG Vessel Responses

# publisherOf[].label
Development of a two-dimensional turbulent wake in a curved channel with a positive streamwise pressure gradient

# publisherOf[].label
APPLICATION OF SMA ACTUATORS TO SPACESUIT GLOVE MOBILITY

# publisherOf[].label
Active Nanocomposite Polymers: Enhancing Sensing and Actuation Performance

# publisherOf[].label
Multi-Axis Maglev Positioner With High Resolution Over Large Travel Range

# publisherOf[].label
SIZE EFFECT ON THE PHASE TRANSFORMATION OF IN-21AT%TL NANOWIRES

# publisherOf[].label
The effect of roughness on the impact dynamics and heat transfer of cryogen droplets impinging onto indented skin phantoms

# publisherOf[].label
TESTING OF NOVEL COMPLIANT SPINES FOR PASSIVE WING MORPHING

# publisherOf[].label
Measurements versus predictions for the dynamic impedance of annular gas seals - Part II: Smooth and honeycomb geometries

# publisherOf[].label
Joint Special Issue: Advances in Design and Manufacturing for Sustainability

# publisherOf[].label
ROTORDYNAMIC FORCE COEFFICIENTS OF A HYBRID BRUSH SEAL: MEASUREMENTS AND PREDICTIONS

# publisherOf[].label
Local heat transfer in a rotating two-pass triangular duct with smooth walls

# publisherOf[].label
2D Discrete Module Beam (DMB) Method Formulation to Simulate Hydro-Elastic Structures With Two Horizontal Bending Axes

# publisherOf[].label
Pad-Pivot Friction Effect on Nonlinear Response of a Rotor Supported by Tilting-Pad Journal Bearings

# publisherOf[].label
NOx-Hydrocarbon Kinetics Model Validation Using Measurements of H₂O in Shock-Heated CH₄/C₂H₆ Mixtures With NO₂ as Oxidant

# publisherOf[].label
Nonstationary Vibration Signal Analysis Using Wavelet-Based Time-Frequency Filter and Wigner-Ville Distribution

# publisherOf[].label
INVESTIGATION OF FLOW BOILING ON NANOSTRUCTURED SURFACES

# publisherOf[].label
Damping Characteristics of Fluidic Pressure-Fed Mechanism for Positioning Applications

# publisherOf[].label
P3GA: An Algorithm for Technology Characterization

# publisherOf[].label
Numerical Investigation of Film and Impingement Cooling Schemes for Gas Turbine Application

# publisherOf[].label
Prediction of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels With 45 Rib Turbulators

# publisherOf[].label
Classification of Sensor Measurements From Non-Newtonian Fluids Using Batch and Online Analysis of Data

# publisherOf[].label
Characteristics of Nanopatterns and the Associated Thermal Mechanisms During Near Field Laser-Material Interaction of Nanosecond Laser on Different Targets

# publisherOf[].label
Adaptive Disturbance Tracking Control With Wind Speed Reduced Order State Estimation for Region II Control of Large Wind Turbines

# publisherOf[].label
UNDERSTANDING ECOLOGICAL EFFICIENCY AND ROBUSTNESS FOR NETWORK DESIGN USING THERMODYNAMIC POWER CYCLES

# publisherOf[].label
Effect of Dispersion Homogeneity on Specific Heat Capacity Enhancement of Molten Salt Nanomaterials Using Carbon Nanotubes

# publisherOf[].label
Full-Field Dependence on Inlet Modeling of Non-Isothermal Turbulent Jets Using Validated Large Eddy Simulations

# publisherOf[].label
Down-Hole Directional Drilling Dynamics Modeling Based on a Hybrid Modeling Method With Model Order Reduction

# publisherOf[].label
Modeling Print Registration in Roll-to-Roll Printing Presses

# publisherOf[].label
Relating Metabolism Suppression and Nucleation Probability During Supercooled Biopreservation.

# publisherOf[].label
Experimental Identification of Dynamic Force Coefficients for a 110 mm Compliantly Damped Hybrid Gas Bearing

# publisherOf[].label
Air Gap Response of Floating Structures: Statistical Predictions Versus Observed Behavior

# publisherOf[].label
Exergetic Analysis of Solar-Powered Hybrid Energy Conversion and Storage Scenarios for Stationary Applications

# publisherOf[].label
ARTIFICIAL COCHLEAR HAIR CELLS USING ACTIVE PIEZOELECTRIC MATERIALS

# publisherOf[].label
GRAPH-BASED INTERPRETATION OF L-SYSTEM ENCODINGS TOWARD AEROELASTIC TOPOLOGY OPTIMIZATION OF A MORPHING AIRFOIL IN SUPERSONIC FLOW

# publisherOf[].label
FULLY PLASTIC CRACK PROBLEMS .1. SOLUTIONS BY A PENALTY METHOD

# publisherOf[].label
Modeling the Onset of Gas Entrainment in a Reduced T-Junction With Co-Current Stratified Gas-Liquid Flow

# publisherOf[].label
Design of a Reconfigurable SMA-Based Solar Array Deployment Mechanism

# publisherOf[].label
Experimental Investigation of the Effect of Purge Flow on Film Cooling Effectiveness on a Rotating Turbine with Non-Axisymmetric Endwall Contouring

# publisherOf[].label
System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems

# publisherOf[].label
NUMERICAL SIMULATIONS OF JET FLOW MIXING WITHIN ROD BUNDLES

# publisherOf[].label
VIBRATION OF THICK RECTANGULAR-PLATES OF BIMODULUS COMPOSITE-MATERIAL

# publisherOf[].label
An Iwatsubo-Based Solution for Labyrinth Seals: Comparison to Experimental Results

# publisherOf[].label
PREDICTING THE OUTPUT OF A TRIBOELECTRIC ENERGY HARVESTER UNDERGOING MECHANICAL PRESSURE

# publisherOf[].label
Feature Recognition for Injection-Molded and Die-Cast Parts

# publisherOf[].label
SPRAY CHARACTERISTICS OF ALTERNATIVE JET FUEL AT ELEVATED AMBIENT CONDITIONS

# publisherOf[].label
On the Causes of Rolling Instability and Chatter

# publisherOf[].label
In-Line Monitoring of Balling Phenomenon in Directed Energy Deposition Processes

# publisherOf[].label
Discrete-Time Closed-Loop Model Identification of Fixed-Structure Unstable Multivariable Systems

# publisherOf[].label
3D PRINTING OF MEDICAL MODELS: A LITERATURE REVIEW

# publisherOf[].label
Aero-Elastic-Control-Floater-Mooring Coupled Dynamic Analysis of Floating Offshore Wind Turbine in Maximum Operation and Survival Conditions

# publisherOf[].label
Cross-sectional deformation of the aorta as measured with magnetic resonance imaging.

# publisherOf[].label
A Modal Transient Simulation Model for Flexible Asymmetric Rotors

# publisherOf[].label
DESIGN OF BEND-AND-SWEEP COMPLIANT MECHANISM FOR PASSIVE SHAPE CHANGE

# publisherOf[].label
TWO-PHASE FLOW VISUALIZATION FOR A HYBRID HEAT SINK

# publisherOf[].label
CONSTITUTIVE MODELING OF MAGNETIC FIELD-INDUCED PHASE TRANSFORMATION IN NIMNCOIN MAGNETIC SHAPE MEMORY ALLOYS

# publisherOf[].label
The Role of Protective System Reliability Analysis in the Study of System Safety

# publisherOf[].label
A Three-Dimensional Constitutive Model for Polycrystalline Shape Memory Alloys Under Large Strains Combined With Large Rotations

# publisherOf[].label
Fischer-Tropsch Fuel Characterization via Microturbine Testing and Fundamental Combustion Measurements

# publisherOf[].label
Aerodynamic Analysis of Conventional and Boundary Layer Ingesting Propellers

# publisherOf[].label
On the State Estimation of an Agonistic-Antagonistic Muscle System

# publisherOf[].label
ANALYSIS OF TOPOGRAPHICAL CHANGES AND ADHESION FAILURES IN GOLD-TO-GOLD METAL RF MEMS SWITCHES WITH CYCLING

# publisherOf[].label
A THERMALLY ACTUATED MICROVALVE FOR SMART IRRIGATION IN PRECISION AGRICULTURE APPLICATIONS

# publisherOf[].label
Bubbly Flow Identification Using Particle Image Velocimetry

# publisherOf[].label
Toward the Use of Machine Learning Models in the Aid of Predictive Maintenance of Nuclear Reactors

# publisherOf[].label
Exploring the Use of Functional Models in Biomimetic Conceptual Design

# publisherOf[].label
Floquet Modal Analysis of a Teetered-Rotor Wind Turbine

# publisherOf[].label
Rotational buoyancy effects on heat transfer in five different aspect-ratio rectangular channels with smooth walls and 45 degree ribbed walls

# publisherOf[].label
Experimental Investigation of Film-Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Periodic Unsteady Flow Conditions

# publisherOf[].label
An Adaptive Control Framework for Unknown Input Estimation

# publisherOf[].label
Re-shaping semi-active structural response via simple applications of embedded computation, sensors and valves

# publisherOf[].label
Numerical Simulation of Piston Effect in Supercritical Carbon Dioxide

# publisherOf[].label
A Simplified Micromechancial Model for Analyzing Viscoelastic-Viscoplastic Response of Unidirectional Fiber Compositese

# publisherOf[].label
Simulation of Micro/Nanopowder Mixing Characteristics for Dry Spray Additive Manufacturing of Li-Ion Battery Electrodes

# publisherOf[].label
Interpretations of indentation size effects

# publisherOf[].label
Co-Current Stratified Gas-Liquid Flow in a Horizontal Pipe With Discharging Branches

# publisherOf[].label
EXPERIMENTAL STUDY OF THE EFFECT OF FUEL PROPERTIES ON SPRAY PERFORMANCE OF ALTERNATIVE JET FUEL

# publisherOf[].label
Some Studies of the Effects of Axial Conduction in a Tube Wall on the Steady-State Laminar Convective Heat Transfer

# publisherOf[].label
An Axial-Flow Compressor for Operation With Humid Air and Water Injection

# publisherOf[].label
Effects of manufacturing-induced voids on local failure in polymer-based composites

# publisherOf[].label
A Kinematic Model Coupling Cytoskeletal Dynamics With JNK Activation in Response to Matrix Stretching

# publisherOf[].label
Aero-Thermal Optimization and Experimental Verification for the Discrete Film Cooling of a Turbine Airfoil

# publisherOf[].label
Nonlinear Wave-Body Interactions for Arbitrarily Shaped Body Using 3D Numerical Wave Tank

# publisherOf[].label
VORTEX GENERATION IN TWO INTRACRANIAL ANEURYSMS

# publisherOf[].label
STACKELBERG GAME BASED MODEL OF HIGHWAY DRIVING

# publisherOf[].label
HEAT TRANSFER PERFORMANCE OF SIO2-WATER NANOFLUID IN A PLATE HEAT EXCHANGER

# publisherOf[].label
Lattice Rotation Patterns and Strain Gradient Effects in Face-Centered-Cubic Single Crystals Under Spherical Indentation

# publisherOf[].label
Computational Methods to Predict and Avoid Design Failure

# publisherOf[].label
Design and Experimental Investigation of Rotational Angle-Based Tracking Control

# publisherOf[].label
IGNITION AND COMBUSTION OF HEAVY HYDROCARBONS USING AN AEROSOL SHOCK-TUBE APPROACH

# publisherOf[].label
Iterative Modeling and Identification of a CO2 Air Conditioning System

# publisherOf[].label
LEADING EDGE JET IMPINGEMENT UNDER HIGH ROTATION NUMBERS

# publisherOf[].label
BIODIESEL FUEL'S EFFECTS ON INFLUENCING PARAMETERS OF BRAKE FUEL CONVERSION EFFICIENCY IN A MEDIUM DUTY DIESEL ENGINE

# publisherOf[].label
Characterization and detection of crack-induced rotary instability

# publisherOf[].label
A Comparison of Experimental Rotordynamic Coefficients and Leakage Characteristics Between Hole-Pattern Gas Damper Seals and a Honeycomb Seal

# publisherOf[].label
Rotordynamic coefficients measurements versus predictions for a high-speed flexure-pivot tilting-pad bearing (load-between-pad configuration)

# publisherOf[].label
An Expert System for Differential Diagnosis of Myocardial Infarction

# publisherOf[].label
Fail Safe, High Temperature Magnetic Bearing for High Efficiency Gas Turbine Engine Applications

# publisherOf[].label
Characterization of the Behavior of Confined Laminar Round Jets

# publisherOf[].label
The Elephant in the Cell: Nuclear Mechanics and Mechanobiology.

# publisherOf[].label
Parametric Study and Correlation of Racetrack Shaped Jets for Leading Edge Impingement

# publisherOf[].label
MEASURED COMPARISON OF LEAKAGE AND ROTORDYNAMIC CHARACTERISTICS FOR A SLANTED-TOOTH AND A STRAIGHT-TOOTH LABYRINTH SEAL

# publisherOf[].label
A Comparison of Graph-Theoretic Approaches for Resilient System of Systems Design

# publisherOf[].label
COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF TWO PARALLEL RECTANGULAR JETS USING OPENFOAM

# publisherOf[].label
The Impact of Pad Flexibility on the Rotordynamic Coefficients of Tilting-Pad Journal Bearings

# publisherOf[].label
Conjugate Heat Transfer and Film Cooling of a Multi-Stage Cooling Scheme

# publisherOf[].label
The Ultrahigh Efficiency Gas Turbine Engine With Stator Internal Combustion

# publisherOf[].label
A Novel Method to Design and Optimize Flat-Foldable Origami Structures Through a Genetic Algorithm

# publisherOf[].label
Tribological Evaluation of Electrical Resistance of Lubricated Contacts

# publisherOf[].label
ON THE IMMERSED BOUNDARY METHOD: FINITE ELEMENT VERSUS FINITE VOLUME APPROACH

# publisherOf[].label
Discussion: A Global Approach of Thermal Effects Including Pad Deformations in Tilting-Pad Journal Bearings Submitted to Unbalance Load (Fillon, M., Desbordes, H., Frne, J., and Chan Hew Wai, C., 1996, ASME J. Tribol., 118, pp. 169174)

# publisherOf[].label
Impingement Heat Transfer on a Cylindrical, Concave Surface With Varying Jet Geometries

# publisherOf[].label
Motion Response Control of the DWSC Spar Based on State-Space Model

# publisherOf[].label
Assessment of Minimally Invasive Device That Provides Simultaneous Adjustable Cardiac Support and Active Synchronous Assist in an Acute Heart Failure Model

# publisherOf[].label
Extraction of Anisotropic Mechanical Properties From Nanoindentation of SiC-6H Single Crystals

# publisherOf[].label
Rotation Effect on Jet Impingement Heat Transfer in Smooth Rectangular Channels With Four Heated Walls and Film Coolant Extraction

# publisherOf[].label
AN ELASTIC STRESS-STRAIN RELATION FOR SPHERE ARRAYS UNDERGOING INITIAL-STAGE SINTERING

# publisherOf[].label
Fractal estimation of flank wear in turning

# publisherOf[].label
Effect of Rotation on Heat Transfer in Narrow Rectangular Cooling Channels (AR = 8:1 and 4:1) With Pin-Fins

# publisherOf[].label
Impact Response of Elasto-Plastic Granular Chains Containing an Intruder Particle

# publisherOf[].label
QuickProbe : Quick Physical Prototyping-in-Context Using Physical Scaffolds in Digital Environments

# publisherOf[].label
ASSESSING THE EFFECT OF INCENTIVE ON COMPUTER-AIDED DESIGN INTENT

# publisherOf[].label
Water Lubricated Sliding Wear of Si3N4/BN Fibrous Monoliths

# publisherOf[].label
GUST: Quantifying Free-Form Geometric Uncertainty of Metamaterials Using Small Data

# publisherOf[].label
A Proposal for Passive Wall Treatment Applied in High Performance Axial Flow Compressors

# publisherOf[].label
Pool boiling experiments on multiwalled carbon nanotube (MWCNT) forests

# publisherOf[].label
Simulation Model of Automated HVAC System Control Strategy With Thermal Comfort and Occupancy Considerations

# publisherOf[].label
Augmented Adaptive Control of Flexible Structures Using Residual Mode Filters

# publisherOf[].label
Enhanced Specific Heat of Silica Nanofluid

# publisherOf[].label
A bulk-flow analysis of multiple-pocket gas damper seals

# publisherOf[].label
Correlations Between Spray Properties and Heat Transfer Dynamics During Cryogen Spray Cooling

# publisherOf[].label
COMPLIANT HYBRID GAS BEARING USING MODULAR HERMETICALLY-SEALED SQUEEZE FILM DAMPERS

# publisherOf[].label
ACTIVE VIBRATION CONTROL OF ROTATING MACHINERY USING PIEZOELECTRIC ACTUATORS INCORPORATING FLEXIBLE CASING EFFECTS

# publisherOf[].label
A Constraint Satisfaction Algorithm for the Generalized Inverse Phase Stability Problem

# publisherOf[].label
A design to increase the static stiffness of hole pattern stator gas seals

# publisherOf[].label
Thermal Performance of Double-Sided, Partial Height Strip Fin Arrays in a High Aspect Ratio, Rectangular Channel

# publisherOf[].label
A PREDICTIVE STRATEGY TO CONTROL TIME-VARYING DELAY SYSTEMS: LEAN-BURN ENGINES

# publisherOf[].label
FREQUENCY DOMAIN ANALYSIS OF THE INTERACTIONS BETWEEN MULTIPLE SHIPS WITH NONZERO SPEED IN WAVES OR CURRENT-WAVE INTERACTIONS

# publisherOf[].label
Laminar Heat Transfer Between a Series of Parallel Plates With Surface-Mounted Discrete Heat Sources

# publisherOf[].label
Static and Dynamic Performance of Pressure Dam Bearings With Dam Steps That Are (I) Square and (II) Filleted

# publisherOf[].label
An Algorithm for Multi-Objective Efficient Parametric Optimization

# publisherOf[].label
Specific Grinding Energy Causing Thermal Damage in Precision Gear Steels

# publisherOf[].label
Numerical Tools for High Performance Axial Compressor Design for Teaching Purpose

# publisherOf[].label
Thermal Spray Processing of Nanostructured Materials

# publisherOf[].label
Numerical Prediction of Film Cooling and Heat Transfer on the Leading Edge of a Rotating Blade in a 1-1/2 Turbine Stage

# publisherOf[].label
The Direction of Cyclic Stretch-Induced Stress Fiber Orientation Depends on Matrix Rigidity

# publisherOf[].label
Impact of Aortic Prosthetic Heart Valve Dysfunction on Left Ventricular Afterload and on the Accuracy of Echo-Doppler Measurements

# publisherOf[].label
Heat Transfer in Water-Cooled Silicon Carbide Milli-Channel Heat Sinks for High Power Electronic Applications

# publisherOf[].label
Taking the Guess Work Out of the Initial Guess: A Solution Interval Method for Least-Squares Parameter Estimation in Nonlinear Models

# publisherOf[].label
Measurements of Leakage and Power Loss in a Hybrid Brush Seal

# publisherOf[].label
Mixed convective heat transfer between a series of vertical parallel plates with planar heat sources

# publisherOf[].label
MODEL GUIDED MIXING OF CERAMIC POWDERS WITH GRADED PARTICLE SIZES IN BINDER JETTING ADDITIVE MANUFACTURING

# publisherOf[].label
GUIDED WAVE PROPAGATION IN TUBULAR SECTION WITH MULTI-LAYERED VISCOELASTIC COATING PART II- CIRCUMFERENTIAL WAVES

# publisherOf[].label
Experimental Investigation of Flow Boiling Heat Transfer Characteristics of FC-72 in Cross-Linked Microchannel Heat Sinks Using Thermochromatic Liquid Crystals

# publisherOf[].label
New steps to improve rotordynamic stability predictions of centrifugal compressors

# publisherOf[].label
EFFECT OF FREESTREAM TURBULENCE INTENSITY ON FILM COOLING JET STRUCTURE AND SURFACE EFFECTIVENESS USING PIV AND PSP

# publisherOf[].label
ANISOTROPIC EFFECT ON DUCTILE CRACK GROWTH OF PRESSURIZED PIPES UNDER FULLY BENDING MOMENT

# publisherOf[].label
REDUCTION OF ACTUATION LOADS IN A SELF-DEPLOYING SMA-BASED SLAT-COVE FILLER FOR A TRANSPORT AIRCRAFT

# publisherOf[].label
INVESTIGATION OF ELASTIC META-STRUCTURES WITH PERIODIC LOCALIZED STRESS-FIELDS

# publisherOf[].label
AUGMENTED HEAT-TRANSFER IN SQUARE CHANNELS WITH PARALLEL, CROSSED, AND V-SHAPED ANGLED RIBS

# publisherOf[].label
ESTIMATING ZONAL FLOW CONTRIBUTIONS IN DEEP WATER ASSETS FROM PRESSURE AND TEMPERATURE DATA

# publisherOf[].label
A thermodynamic framework for describing solidification of polymer melts

# publisherOf[].label
Property-Graded Stainless Steel 316L by Selective Laser Melting: Characterization & Design

# publisherOf[].label
THREE DIMENSIONAL SIMULATION OF RAYLEIGH-BENARD CONVECTION FOR RAPID MICROSCALE POLYMERASE CHAIN REACTION

# publisherOf[].label
Stratification in Nuclear Reactor Components

# publisherOf[].label
DESIGN, MICROFABRICATION AND TESTING OF BRAIN-ON-A-CHIP (BOC) PLATFORM USING NEURAL ORGANOIDS (SPHEROIDS)

# publisherOf[].label
IMPROVING TILTING-PAD JOURNAL BEARING PREDICTIONS: PART I - MODEL DEVELOPMENT AND IMPACT OF ROTOR-EXCITED VERSUS BEARING-EXCITED IMPEDANCE COEFFICIENTS

# publisherOf[].label
Rotation Effect on Jet Impingement Heat Transfer in Smooth Rectangular Channels With Four Heated Walls and Radially Outward Crossflow

# publisherOf[].label
Special Issue: Networks and Graphs for Engineering Systems and Design

# publisherOf[].label
Dry-Friction Whip and Whirl Predictions for a Rotor-Stator Model With Rubbing Contact at Two Locations

# publisherOf[].label
DEVELOPING A TAXONOMY OF RISK-MITIGATING ACTIONS FROM A LEGACY DATABASE OF A LARGE DESIGN ORGANIZATION

# publisherOf[].label
Fractional coverage model for the adsorption and removal of gas species and application to superlow friction diamond-like carbon

# publisherOf[].label
Fractional PD-ID Error Manifolds for Robust Tracking Control of Robotic Manipulators

# publisherOf[].label
FLOW VELOCITY AND IMPACT PRESSURE IN LIQUID SLOSHING

# publisherOf[].label
Guest Editorial for the Special Issue on Micro/Nanoscale Transport Phenomena

# publisherOf[].label
A Numerical Study on Reducing the Stator Blade Surface Temperature in the Ultra-High Efficiency Gas Turbine Engine by Indexing Fuel Injectors and Using Film Cooling

# publisherOf[].label
Comparison of Diesel Engine Efficiency and Combustion Characteristics Between Different Bore Engines

# publisherOf[].label
A Test Apparatus and Facility to Identify the Rotordynamic Coefficients of High-Speed Hydrostatic Bearings

# publisherOf[].label
AUTOIGNITION STUDY OF "GAS-TO-LIQUID" FISCHER-TROPSCH JET FUELS

# publisherOf[].label
Nanoscale motion control with a compact minimum-actuator magnetic levitator

# publisherOf[].label
A 4-PARAMETER CHANGE-POINT MODEL FOR PREDICTING ENERGY-CONSUMPTION IN COMMERCIAL BUILDINGS

# publisherOf[].label
Tracking of Periodic Trajectories for Switched Systems Under Time-Varying Asynchronous Switching

# publisherOf[].label
Effect of unsteady wake passing frequency on boundary layer transition, experimental investigation, and wavelet analysis

# publisherOf[].label
NON-LINEAR IMPEDANCE-BASED STRUCTURAL HEALTH MONITORING FOR DAMAGE DETECTION AND IDENTIFICATION

# publisherOf[].label
TEST-RESULTS FOR ROTORDYNAMIC COEFFICIENTS OF THE SSME HPOTP TURBINE INTERSTAGE SEAL WITH 2 SWIRL BRAKES

# publisherOf[].label
Automated Three-Dimensional Reconstruction of the Left Ventricle From Multiple-Axis Echocardiography.

# publisherOf[].label
Second Order Difference Frequency Wave-Current Loading Using Kelvin-Newman Approximation

# publisherOf[].label
Experimental and Numerical Investigation of Heat Transfer and Film Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Unsteady Wake Flow Condition

# publisherOf[].label
INVESTIGATION OF HIGH TEMPERATURE NANOFLUIDS FOR SOLAR THERMAL POWER CONVERSION AND STORAGE APPLICATIONS

# publisherOf[].label
Impact of Turbine Blade Stagger Angle Adjustment On the Efficiency and Performance of Gas Turbines During Off-Design and Dynamic Operation

# publisherOf[].label
An Experimental Study of Local Heat Transfer Distribution Between Blockages With Holes in a Rectangular Channel

# publisherOf[].label
Direct Adaptive Individual Blade Pitch Control for Large Wind Turbines

# publisherOf[].label
Exploring the Use of Category and Scale to Scope a Biological Functional Model

# publisherOf[].label
Modeling, Simulation and Experimental Validation of Heat Transfer During Selective Laser Melting

# publisherOf[].label
Optimal Control of Material Micro-structures

# publisherOf[].label
Ignition and Flame Speed Kinetics of Two Natural Gas Blends With High Levels of Heavier Hydrocarbons

# publisherOf[].label
INTERACTION IN DECENTRALIZED CONTROL SYSTEMS: APPLICATION TO ROLL-TO-ROLL SYSTEMS

# publisherOf[].label
A design to improve the effective damping characteristics of hole-pattern-stator annular gas seals

# publisherOf[].label
A Transient Computational Fluid Dynamics, Phase Modulated, Multifrequency Approach for Impeller Rotordynamic Forces

# publisherOf[].label
High Temperature Characterization of a Radial Magnetic Bearing for Turbomachinery

# publisherOf[].label
Thermo-Fluidic Characteristics in a Cross-Linked Silicon Microchannel Heat Sink

# publisherOf[].label
Effects of a wire mesh on droplet size and velocity distributions of cryogenic sprays

# publisherOf[].label
EXPERIMENTAL AND NUMERICAL CHARACTERIZATION OF DROPLET-INDUCED SPREADING-SPLASHING TRANSITION IN SURFACE COOLING

# publisherOf[].label
DEVELOPING A MODEL FOR MASS TRANSPORT OF NITRIC OXIDE IN THE LYMPHATIC SYSTEM

# publisherOf[].label
SENSORLESS CONTROL OF SMA USING SEEBECK VOLTAGE

# publisherOf[].label
CFD-Based Correlation for Forced Convection Heat Transfer in Circular Ducts of Internally Heated Molten Salts

# publisherOf[].label
An Axial Flow Compressor for Operation With Humid Air and Water Injection

# publisherOf[].label
Adaptive Tool Replacement Policies in Machining Economics

# publisherOf[].label
CH Kinetics Measurements and Their Importance for Modeling Prompt NOx Formation in Gas Turbines

# publisherOf[].label
NUCLEATION AND BOUNDARY LAYER GROWTH OF SHEAR BANDS IN MACHINING

# publisherOf[].label
Comparison of Turbulent Jets Issuing from Various Sharp Contoured Nozzles

# publisherOf[].label
Experimental Study and Finite Element Modeling of Workpiece Temperature in Finish Cylinder Boring

# publisherOf[].label
Turning Region Heat Transfer in Five, Stationary and Rotating, Multi-Pass Channels With Various Aspect Ratios

# publisherOf[].label
Outcome Based Assessment and Continuous Improvement Model for Engineering Technology Programs

# publisherOf[].label
Optimal Setpoints for HVAC Systems via Iterative Cooperative Neighbor Communication

# publisherOf[].label
Experimental Study of the Static and Dynamic Characteristics of a Long (L/D=0.75) Labyrinth Annular Seal Operating Under Two-Phase (Liquid/Gas) Conditions

# publisherOf[].label
Measuring Human Learning in Design Space Exploration to Assess Effectiveness of Knowledge Discovery Tools

# publisherOf[].label
PROBABILITY DISTRIBUTIONS FOR WAVE RUNUP ON OFFSHORE PLATFORM COLUMNS

# publisherOf[].label
Effect of Rib Angle on Local Heat/Mass Transfer Distribution in a Two-Pass Rib-Roughened Channel

# publisherOf[].label
A Two-Phase Framework for Linear Permanent-Magnet Machines and Multi-Axis Stages With Magnetic Levitation

# publisherOf[].label
Heat Transfer Enhancement in a Rectangular (AR=3:1) Channel With V-Shaped Dimples

# publisherOf[].label
Effect of Plenum Length and Diameter on Turbulent Heat Transfer in a Downstream Tube and on Plenum-Related Pressure Losses

# publisherOf[].label
High Rotation Number Effect on Heat Transfer in a Triangular Channel With 45, Inverted 45, and 90 Ribs

# publisherOf[].label
DESIGN OPTIMIZATION OF FOLDING SOLAR POWERED AUTONOMOUS UNDERWATER VEHICLES USING ORIGAMI ARCHITECTURE

# publisherOf[].label
CLOSENESS OF THE SOLUTIONS OF APPROXIMATELY DECOUPLED DAMPED LINEAR-SYSTEMS TO THEIR EXACT-SOLUTIONS

# publisherOf[].label
Validation of a Smoothed Particle Hydrodynamics Code for Internal Flow Simulations: Application to Hemodynamics in a Realistic Left Heart Cavity Model

# publisherOf[].label
Tilting Pad Journal Bearings: On Bridging the Hot Gap Between Experimental Results and Model Predictions

# publisherOf[].label
EFFECTIVE TUNING OF CASCADED CONTROL LOOPS FOR NONLINEAR HVAC SYSTEMS

# publisherOf[].label
THE INFLUENCE OF PEBBLE PLACEMENT ON THE WAKE OF TANDEM PEBBLES IN A FREE STREAM

# publisherOf[].label
Assessment of steady state PSP, TSP, and IR measurement techniques for flat plate film cooling

# publisherOf[].label
A Hybrid Model for Predicting Gas Entrainment in a Small Branch From a Co-Current Flowing Gas-Liquid Regime

# publisherOf[].label
In vivo stress analysis of a pacing lead from an angiographic sequence.

# publisherOf[].label
HIGH TEMPERATURE, PERMANENT MAGNET BIASED, FAULT TOLERANT, HOMOPOLAR MAGNETIC BEARING DEVELOPMENT

# publisherOf[].label
Bioinspiration of Product Architecture: Trading-Off System Effectiveness for System Robustness

# publisherOf[].label
Gait and Gait Transition for a Robot With Two Actuated Spoke Wheels

# publisherOf[].label
ON THE EFFECT OF THERMAL ENERGY TRANSPORT TO THE PERFORMANCE OF (SEMI)FLOATING RING BEARING SYSTEMS FOR AUTOMOTIVE TURBOCHARGERS

# publisherOf[].label
TREAT Transient Modeling and Impact of Graphite Thermal Scattering

# publisherOf[].label
Experimental Investigation of Solar-Thermal Desalination Platform Leveraging Dynamic Flash Evaporation and Swirl Flow Separator

# publisherOf[].label
EFFECTS OF HYDROGEN ADDITION ON THE FLAME SPEEDS OF NATURAL GAS BLENDS UNDER UNIFORM TURBULENT CONDITIONS

# publisherOf[].label
Prediction of Aeroacoustic Resonance in Cavities of Hole-Pattern Stator Seals

# publisherOf[].label
Modeling of Dry-Out Incipience for Flow Boiling in a Circular Microchannel at a Uniform Heat Flux

# publisherOf[].label
THERMAL EFFECTS IN CRYOGENIC LIQUID ANNULAR SEALS .1. THEORY AND APPROXIMATE SOLUTION

# publisherOf[].label
PROGRESSIVE MOORING-LINE FAILURE OF A DEEPWATER MODU IN HURRICANE CONDITIONS

# publisherOf[].label
Analysis of acoustic emission signals in machining

# publisherOf[].label
EVALUATING THE IMPACT OF CYBER-ATTACKS ON GRID-INTERACTIVE EFFICIENT BUILDINGS

# publisherOf[].label
LEVY TYPE SOLUTIONS FOR SYMMETRICALLY LAMINATED RECTANGULAR-PLATES USING 1ST-ORDER SHEAR DEFORMATION-THEORY

# publisherOf[].label
The maximum potential energy savings from optimizing cold deck and hot deck reset schedules for dual duct VAV systems

# publisherOf[].label
A FINITE ELEMENT STUDY OF STABLE CRACK-GROWTH IN SUPERELASTIC SHAPE MEMORY ALLOYS

# publisherOf[].label
Steady-State and Transient Dynamical Systems Analysis of Uncoupled and Coupled Very Large Amplitude Roll Response of a Vessel in Regular and Random Waves

# publisherOf[].label
Decentralized Control of Large-Scale Systems

# publisherOf[].label
Three-dimensional numerical simulations of circular cylinders undergoing two degree-of-freedom vortex-induced vibrations

# publisherOf[].label
A NEW PHYSICS BASED UNSTEADY TRANSITION MODEL USING THE UNIVERSAL INTERMITTENCY FUNCTION

# publisherOf[].label
Dynamic Force Coefficients of Hydrostatic Gas Films for Recessed Flat Plates: Experimental Identification and Numerical Predictions

# publisherOf[].label
FINITE-LENGTH SOLUTIONS FOR ROTORDYNAMIC COEFFICIENTS OF TURBULENT ANNULAR SEALS

# publisherOf[].label
Prediction of Rotordynamic Performance of Smooth Stator-Grooved Rotor Liquid Annular Seals Utilizing Computational Fluid Dynamics

# publisherOf[].label
Component Synthesis of Multicase, Rotating Machinery Trains by the Generalized Receptance Approach

# publisherOf[].label
Identification of Squeeze Film Damper Force Coefficients From Multiple-Frequency Noncircular Journal Motions

# publisherOf[].label
Cohesive-Shear-Lag Modeling of Interfacial Stress Transfer Between a Monolayer Graphene and a Polymer Substrate

# publisherOf[].label
Effect of channel orientation of local heat (mass) transfer distributions in a rotating two-pass square channel with smooth walls

# publisherOf[].label
Boundary Layer Two-Phase Bubbly Flow Equation

# publisherOf[].label
A note on Kellenberger's model for spiral vibrations

# publisherOf[].label
CH KINETICS MEASUREMENTS AND THEIR IMPORTANCE FOR MODELING PROMPT NOx FORMATION IN GAS TURBINES

# publisherOf[].label
A Design to Improve the Effective Damping Characteristics of Hole-Pattern-Stator Annular Gas Seals

# publisherOf[].label
HIGH TEMPERATURE MAGNETIC THRUST BEARING: THEORY AND EXPERIMENT

# publisherOf[].label
INVESTIGATION OF GTL-LIKE JET FUEL COMPOSITION ON GT ENGINE ALTITUDE IGNITION AND COMBUSTION PERFORMANCE PART II: DETAILED DIAGNOSTICS

# publisherOf[].label
EXPERIMENTAL CHARACTERIZATION OF SINGLE AND MULTIPLE DROPLET IMPINGEMENT ON SURFACES SUBJECT TO CONSTANT HEAT FLUX CONDITIONS

# publisherOf[].label
OPTIMIZATION OF FUEL STORAGE IN SPENT FUEL POOL

# publisherOf[].label
Comments on a Newly-Identified Destabilizing Rotordynamic Mechanism Arising in Vertical Hydraulic Turbines and the Back Shrouds of Centrifugal Impellers

# publisherOf[].label
Novel Approach for Optical Characterization of Thrust Collar Lubricated Area: Experimental and Numerical Results

# publisherOf[].label
Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy With Near Ultra-Fine Grained Structure

# publisherOf[].label
Simulation of Micro-Pore Formation in Spray Deposition Processes

# publisherOf[].label
Laminar Flame Speeds of Oxy-Methane Flames With CO2 Dilution at Elevated Pressures

# publisherOf[].label
Flutter Suppression of Wind Turbine Blade Using Adaptive Control

# publisherOf[].label
A Novel Chopped Pyroelectric Infrared Sensor for Detecting the Presence of Stationary and Moving Occupants

# publisherOf[].label
Tube bending under axial force and internal pressure

# publisherOf[].label
Evaluation of a Machine Learning Turbulence Model in a Square Transverse Jet in Crossflow

# publisherOf[].label
Thermal performance of angled, V-shaped, and W-shaped rib turbulators in rotating rectangular cooling channels (AR=4:1)

# publisherOf[].label
DEVELOPMENT OF A KEYWORD SEARCH ALGORITHM FOR BIOINSPIRED DESIGN OF FOLDABLE ENGINEERING APPLICATIONS

# publisherOf[].label
Test Results for Sawtooth-Pattern Damper Seals: Leakage and Rotordynamic Coefficients

# publisherOf[].label
Experimental Investigation of a Scaled-Up Passive Interdigital Micromixer With Circular-Sector Mixing Elements

# publisherOf[].label
Heat Transfer in Rotating Rectangular Channels (AR = 4:1) With V-Shaped and Angled Rib Turbulators With and Without Gaps

# publisherOf[].label
Modeling Rate Effects and Cyclic Loads With the Pressuremeter

# publisherOf[].label
A PROJECT-BASED LEARNING STEM PROGRAM FOR MIDDLE AND HIGH SCHOOL STUDENTS

# publisherOf[].label
How Solar and Storage Can Reduce Coincident Peak Loads and Payments: A Case Study in Austin, TX

# publisherOf[].label
COMPARISON OF STAGGERED AND IN-LINE V-SHAPED DIMPLE ARRAYS USING S-PIV

# publisherOf[].label
PARETO OPTIMAL SETPOINTS FOR HVAC NETWORKS VIA ITERATIVE NEAREST NEIGHBOR COMMUNICATION

# publisherOf[].label
Exploring Sample/Feature Hybrid Transfer for Gear Fault Diagnosis Under Varying Working Conditions

# publisherOf[].label
Contact transition control of nonlinear mechanical systems subject to a unilateral constraint

# publisherOf[].label
Comparison of Ultrasonic Wave Radiation Effects on Asphaltene Aggregation in Toluene-Pentane Mixture Between Heavy and Extra Heavy Crude Oils

# publisherOf[].label
Strain Localization in Determining the Constitutive Response of Polymers

# publisherOf[].label
Computation of a Lower Bound for a Vehicle Routing Problem With Motion Constraints

# publisherOf[].label
Some applications of automatic differentiation to rigid, flexible, and constrained multibody dynamics

# publisherOf[].label
State Estimation With Finite Signal-to-Noise Models via Linear Matrix Inequalities

# publisherOf[].label
Shock Absorption Using Linear Particle Chains With Multiple Impacts

# publisherOf[].label
NOVEL PIXELATED MULTICELLULAR REPRESENTATION FOR ORIGAMI STRUCTURES THAT INNOVATES COMPUTATIONAL DESIGN AND CONTROL

# publisherOf[].label
LOCAL HEAT MASS-TRANSFER DISTRIBUTIONS AROUND SHARP 180 DEG TURNS IN 2-PASS SMOOTH AND RIB-ROUGHENED CHANNELS

# publisherOf[].label
Amorphous Carbon Thin Films for Interfaces in MEMS

# publisherOf[].label
IGNITION AND OXIDATION OF 50/50 BUTANE ISOMER BLENDS

# publisherOf[].label
Thin Liquid Film Flow on a Rotating Annular Disk: Asymptotic Solution

# publisherOf[].label
TRANSIENT ANALYSIS OF TILT PAD JOURNAL BEARINGS INCLUDING EFFECTS OF PAD FLEXIBILITY AND FLUID FILM TEMPERATURE

# publisherOf[].label
The Effect of Credit Definition and Aggregation Strategies on Multi-Objective Hyper-Heuristics

# publisherOf[].label
Micro and nanoscale experiments and finite element studies of rail steels

# publisherOf[].label
Deformation Twinning During Impact of a Titanium Cylinder: Numerical Investigation

# publisherOf[].label
EFFECTS OF WELD STRENGTH MISMATCH ON J AND CTOD ESTIMATION PROCEDURES FOR SENT FRACTURE SPECIMENS BASED ON PLASTIC ETA-FACTORS

# publisherOf[].label
Simulation of Combustion Recession After End-of-Injection at Diesel Engine Conditions

# publisherOf[].label
COAL-FUELED DIESEL CYCLE SIMULATION - THE ROLE OF GROUP EFFECTS

# publisherOf[].label
Automatic Composition of Encoding Scheme and Search Operators in System Architecture Optimization

# publisherOf[].label
Subcooled Pool Boiling Experiments on Horizontal Heaters Coated With Carbon Nanotubes

# publisherOf[].label
LARGE EDDY SIMULATIONS OF JET FLOW INTERACTION WITHIN STAGGERED ROD BUNDLES

# publisherOf[].label
A Computer Model for Gas Turbine Blade Cooling Analysis

# publisherOf[].label
Design of Modern Controls for the Controlled Advanced Research Turbine (CART)

# publisherOf[].label
Thermoviscoplasticity in Body-Centered Cubic Metals: A Two-Temperature Model With Grain Boundary Evolution

# publisherOf[].label
MULTIPHASE FLOW DISTRIBUTION IN MQL DRILLING USING OPTICAL INTENSITY DISTRIBUTION BASED APPROACH

# publisherOf[].label
A SIMPLE HIGHER-ORDER THEORY FOR LAMINATED COMPOSITE PLATES

# publisherOf[].label
BIO-INSPIRED HUMAN NETWORK DESIGN: A MULTI-CURRENCY ROBUSTNESS METRIC INSPIRED BY ECOLOGICAL NETWORK ANALYSIS

# publisherOf[].label
Effect of Compliance and Backlash on the Output Speed of a Mechanical Transmission System

# publisherOf[].label
Measured Static and Rotordynamic Coefficient Results for a Rocker-Pivot, Tilting-Pad Bearing With 50 and 60% Offsets

# publisherOf[].label
An approach to characterize nonlinear viscoelastic material behavior using dynamic mechanical tests and analyses

# publisherOf[].label
ANALYTICAL SOLUTIONS OF REFINED PLATE THEORIES OF CROSS-PLY COMPOSITE LAMINATES

# publisherOf[].label
Workpiece Temperature During Deep-Hole Drilling of Cast Iron Using High Air Pressure Minimum Quantity Lubrication

# publisherOf[].label
The Direction of Cyclic Stretch-Induced Cell and Stress Fiber Alignment Depends on Matrix Rigidity

# publisherOf[].label
VISCOUS SHEAR BANDING IN CUTTING OF METALS

# publisherOf[].label
DESIGN OF A MULTIPLE-ACTUATION SHAPE MEMORY ALLOY PIPE COUPLER: MATERIAL DEVELOPMENT AND CHARACTERIZATION

# publisherOf[].label
Heat (mass) transfer in a diagonally oriented rotating two-pass channel with rib-roughened walls

# publisherOf[].label
An Object-Oriented Parallel Finite-Volume CFD Code

# publisherOf[].label
Dynamic Response Comparison of Mono and Dual Submerged Floating Tunnels

# publisherOf[].label
An experimental investigation of the survivability and friction characteristics of tin-coated and polymer-laminated steels

# publisherOf[].label
Dynamic modeling and monitoring of contour crafting - An extrusion-based layered manufacturing process

# publisherOf[].label
Assessment of Minimally Invasive Device That Provides Simultaneous Adjustable Cardiac Support and Active Synchronous Assist in an Acute Heart Failure Model

# publisherOf[].label
Heat Transfer and Friction in a Rectangular Channel With Varying Numbers of Walls Roughened With 90-Deg Transverse or 45-Deg V-Shaped Ribs

# publisherOf[].label
THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC COEFFICIENT OF LABYRINTH GAS SEALS .2. A COMPARISON TO EXPERIMENT

# publisherOf[].label
Stroke-Hover Intent Recognition for Mid-Air Curve Drawing Using Multi-Point Skeletal Trajectories

# publisherOf[].label
The Hermite Moment Model for Highly Skewed Response With Application to Tension Leg Platforms

# publisherOf[].label
Ignition of lean methane-based fuel blends at gas turbine pressures

# publisherOf[].label
THREE-DIMENSIONAL HYDROELASTIC DYNAMIC ANALYSES INCLUDING TORSION FOR A LARGE FLOATING PLATFORM IN FREQUENCY AND TIME DOMAINS

# publisherOf[].label
Multiscale Control to Meet the Conflicting Nanoscale Performance Requirements

# publisherOf[].label
TWO DIMENSIONAL MODIFIED REYNOLDS EQUATION INCLUDING PRESSURE DEPENDENT VISCOSITY EFFECT

# publisherOf[].label
A Framework for Sufficiency Estimation of Engineering Design Models

# publisherOf[].label
Numerical simulation of mixed convective flow over a three-dimensional horizontal backward facing step

# publisherOf[].label
Full- and Reduced-Order Fault Detection Filter Design With Application in Flow Transmission Lines

# publisherOf[].label
AN ANALYSIS OF WRINKLING IN THE SWIFT CUP TEST

# publisherOf[].label
Turbulent Heat Transfer and Friction in Pin Fin Channels With Lateral Flow Ejection

# publisherOf[].label
ESTIMATION OF LOCATION AND ORIENTATION FROM RANGE MEASUREMENTS

# publisherOf[].label
ROTORDYNAMICS OF A 2-PHASE FLOW TWIN SCREW PUMP

# publisherOf[].label
An Analytical Poroelastic Model of a Nonhomogeneous Medium Under Creep Compression for Ultrasound Poroelastography Applications-Part II.

# publisherOf[].label
SIMULATION OF FLUID-STRUCTURE INTERACTION OF CROSSFLOW THROUGH A TUBE BUNDLE AND EXPERIMENTAL VALIDATION

# publisherOf[].label
Topology Optimization of Lightweight Structures With Application to Bone Scaffolds and 3D Printed Shoes for Diabetics

# publisherOf[].label
Improving Tilting-Pad Journal Bearing Predictions-Part II: Comparison of Measured and Predicted Rotor-Pad Transfer Functions for a Rocker-Pivot Tilting-Pad Journal Bearing

# publisherOf[].label
Dynamic Characterization of a Novel Externally Pressurized Compliantly Damped Gas-Lubricated Bearing With Hermetically Sealed Squeeze Film Damper Modules

# publisherOf[].label
Measurements of Static and Dynamic Load Performance of a 102 MM Carbon-Graphite Porous Surface Tilting-Pad Gas Journal Bearing

# publisherOf[].label
Generative Design of Statistically Self-Similar Mechanical Structures

# publisherOf[].label
Experimental Observations on the Dynamic Response of Phase Change Materials

# publisherOf[].label
Floating Offshore Wind Turbine Dynamics: Large-Angle Motions in Euler-Space

# publisherOf[].label
DESIGN OF A MASSIVELY RECONFIGURABLE ORIGAMI SPACE STRUCTURE INCORPORATING SHAPE MEMORY ALLOYS

# publisherOf[].label
Study of Subcooled Film Boiling on a Horizontal Disc: Part IAnalysis

# publisherOf[].label
Thermal Characterization of a Turbulent Free Jet With Planar Laser Induced Fluorescence (PLIF)

# publisherOf[].label
Investigation Into a Steam Whirl Which Affected HP Rotors of 300 MW Steam Turbines

# publisherOf[].label
Experimental Investigations of the Effect of Scheme Exit Height and Double Row Injection on the Film Cooling Performance of a Micro Tangential Jet Scheme: Part II  Suction Side

# publisherOf[].label
Electronic Damping in Multifunctional Systems

# publisherOf[].label
Handy-Potter: Rapid 3D Shape Exploration Through Natural Hand Motions

# publisherOf[].label
CONCEPTS IN BIOMIMETIC DESIGN: METHODS AND TOOLS TO INCORPORATE INTO A BIOMIMETIC DESIGN COURSE

# publisherOf[].label
Three-Dimensional Solid Finite Element Contact Model for Rotordynamic Analysis: Experiment and Simulation

# publisherOf[].label
MODELING AND VIBRATION SUPPRESSION OF PRESSURIZED OPTICAL MEMBRANE

# publisherOf[].label
Direct Numerical Simulation of Near Field Thermal Radiation Based on Wiener Chaos Expansion of Thermal Fluctuating Current

# publisherOf[].label
Generation and Mapping of Minimally-Restrictive Manufacturability Constraints for Mechanical Design Problems

# publisherOf[].label
Second-Order Low-Frequency Wave Forces on a SPM Offloading Tanker in Shallow Water

# publisherOf[].label
Remarks on the Potential Cross Flow Over Tube Banks

# publisherOf[].label
Design and Development of a Sun Tracking Mechanism Using the Direct SMA Actuation

# publisherOf[].label
CHARACTERIZATION OF FORCES IN HIGH-SPEED BONE CUTTING AND GRINDING FOR HAPTICS RENDERING

# publisherOf[].label
Simulation of a Subcooled Boiling Experiment Using RELAP5/MOD3.2 Computer Code

# publisherOf[].label
An Experimental and Modeling Study of Electroosmotic Bulk and Near-Wall Flows in Two-Dimensional Micro- and Nanochannels

# publisherOf[].label
MOLECULAR DYNAMICS SIMULATION OF INTERFACIAL THERMAL RESISTANCE OF NANOFINS

# publisherOf[].label
Spray Performance of Alternative Jet Fuel Based Nanofuels at High-Ambient Conditions

# publisherOf[].label
TURBINE-FLOATER-TETHER COUPLED DYNAMIC ANALYSIS INCLUDING SECOND-ORDER SUM-FREQUENCY WAVE LOADS FOR A TLP-TYPE FOWT (FLOATING OFFSHORE WIND TURBINE)

# publisherOf[].label
A SMALL STRAIN AND MODERATE ROTATION THEORY OF ELASTIC ANISOTROPIC PLATES

# publisherOf[].label
AN EXPERIMENTAL STUDY OF IN VITRO TRANSDERMAL DRUG DELIVERY ASSISTED BY CRYOPNEUMATIC TECHNOLOGY

# publisherOf[].label
Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical Seal: Large Contact Force

# publisherOf[].label
INFLUENCE OF SURFACE HEAT-FLUX RATIO ON HEAT-TRANSFER AUGMENTATION IN SQUARE CHANNELS WITH PARALLEL, CROSSED, AND V-SHAPED ANGLED RIBS

# publisherOf[].label
Sensitivity Analysis and Uncertainty Quantification of a Digital Twin-Based Simulator for Small Modular and Microreactors

# publisherOf[].label
Genetic Algorithm Tracking Technique for Particle Image Velocimetry and Comparison With Other Tracking Models

# publisherOf[].label
PIEZOELECTRIC PUSHERS FOR ACTIVE VIBRATION CONTROL OF ROTATING MACHINERY

# publisherOf[].label
Crack Deflection Near a Ply Interface in a Composite Laminate

# publisherOf[].label
MODELING STIFFNESS LOSS IN QUASI-ISOTROPIC LAMINATES DUE TO MICROSTRUCTURAL DAMAGE

# publisherOf[].label
Heat Transfer in a Rotating, Blade-Shaped, Two-Pass Cooling Channel With a Variable Aspect Ratio

# publisherOf[].label
EXPERIMENTAL TEST-RESULTS FOR 4 HIGH-SPEED, HIGH-PRESSURE, ORIFICE-COMPENSATED HYBRID BEARINGS

# publisherOf[].label
VERTICAL RISER VIV SIMULATION IN UNIFORM CURRENT

# publisherOf[].label
A Time-Dependent Solver for Coupled Neutron-Transport Thermal-Mechanics Calculations and Simulation of a Godiva Prompt-Critical Burst

# publisherOf[].label
A Homogenization Scheme for Nonlinear Viscoelastic Behaviors of Particulate Reinforced Composites

# publisherOf[].label
AN EXPERIMENTAL AND NUMERICAL STUDY OF SHAPE MEMORY ALLOY-BASED TENSEGRITY/ORIGAMI STRUCTURES

# publisherOf[].label
TWO PHASE ANNULAR FLOW APPROXIMATION USING 1-D FLOW EQUATIONS COUPLED WITH A DRIFT FLUX MODEL FOR CONCURRENT FLOW IN VERTICAL OR NEAR VERTICAL CHANNELS

# publisherOf[].label
Measured Leakage and Rotordynamic Force Coefficients for Two Liquid Annular Seal Configurations: Smooth-Rotor/Grooved-Stator Versus Grooved-Rotor/Smooth-Stator

# publisherOf[].label
A PROCEDURE FOR PLOTTING THE SUN-PATH DIAGRAM, AND SHADING MASK PROTECTOR

# publisherOf[].label
Experimental Investigation of the Two-Phase Phenomena in a Small Discharge Installed on a Large Pipe With Stratified Gas-Liquid Flow

# publisherOf[].label
Fidelity of the estimation of the deformation gradient from data deduced from the motion of markers placed on a body that is subject to an inhomogeneous deformation field.

# publisherOf[].label
Heat Transfer and Pressure Loss in a Two-Pass, Rectangular Channel Featuring a Reduced Cross-Sectional Area After the 180-Deg Tip Turn With Different Turning Vane Configurations

# publisherOf[].label
Quantification of Uncertainty in Reserve Estimation From Decline Curve Analysis of Production Data for Unconventional Reservoirs

# publisherOf[].label
Using Parameterized Pareto Sets to Model Design Concepts

# publisherOf[].label
A Model Engineering-Based STEM Learning Program

# publisherOf[].label
Water Waves and Marine Structure Interaction

# publisherOf[].label
A Novel Bulk-Flow Model for Improved Predictions of Force Coefficients in Grooved Oil Seals Operating Eccentrically

# publisherOf[].label
Transit Draft Heave and Pitch Motion Analysis of the Mobile Offshore Base (MOB) Using Reverse MI/SO Techniques

# publisherOf[].label
LAMINAR FLAME SPEED MEASUREMENTS AND MODELING OF PURE ALKANES AND ALKANE BLENDS AT ELEVATED PRESSURES

# publisherOf[].label
Air-Fuel Ratio Control of Lean-Burn SI Engines Using Fuzzy Sliding-Mode Technique

# publisherOf[].label
Large Eddy Simulation of a 67-Pebble Bed Experiment

# publisherOf[].label
PIV Measurements of Jet Flow Mixing in the Vicinity of Rod Bundles using Matched-Index of Refraction

# publisherOf[].label
Simplified building and air-handling unit model calibration and applications

# publisherOf[].label
Chip Stick and Slip Motions of a Machine Tool in the Cutting Process

# publisherOf[].label
Biomechanics of the canine mandible during bone transport distraction osteogenesis.

# publisherOf[].label
Heat Transfer Coefficients and Film Cooling Effectiveness on the Endwall of a Transonic Turbine Vane Measured With the Reference Luminophore of Binary Pressure-Sensitive Paint

# publisherOf[].label
Reinforcement Learning for Control of a Shape Memory Alloy Based Self-Folding Sheet

# publisherOf[].label
Fine-Scale Simulation of Sandstone Acidizing

# publisherOf[].label
Two-Temperature Thermodynamics for Metal Viscoplasticity: Continuum Modeling and Numerical Experiments

# publisherOf[].label
Comparison of predictions with test results for rotordynamic coefficients of a four-pocket gas damper seal

# publisherOf[].label
An Analytical Two-Phase Flow Model for Prediction of Leakage in Wet Gas Labyrinth Seals and Pocket Damper Seals. Is Simplicity Still Desired?

# publisherOf[].label
A Novel Automotive Transmission Clutch Control Mechanism

# publisherOf[].label
Interdisciplinary Research on Designing Engineering Material Systems: Results From a National Science Foundation Workshop

# publisherOf[].label
OUTPUT REGULATION OF A CLASS OF NONLINEAR SYSTEMS USING DIFFERENTIAL-ALGEBRAIC EQUATIONS

# publisherOf[].label
Rib spacing effect on heat transfer and pressure loss in a rotating two-pass rectangular channel (AR=1:2) with 45-degree angled ribs

# publisherOf[].label
Liquid Holdup Discretized Solution's Existence and Uniqueness Using a Simplified Averaged One-Dimensional Upward Two-Phase Flow Transient Model

# publisherOf[].label
Large Eddy Simulation of Tube Bundle Geometries Using the Dynamic Subgrid Scale Model

# publisherOf[].label
CO Laser Absorption Measurements During Syngas Combustion at High Pressure

# publisherOf[].label
ANALYSIS OF SHAPE MEMORY ALLOY COMPONENTS USING BEAM, SHELL, AND CONTINUUM FINITE ELEMENTS

# publisherOf[].label
AERO-THERMAL SHAPE OPTIMIZATION FOR THE DISCRETE FILM COOLING OF A TURBINE AIRFOIL

# publisherOf[].label
On Kinematics in Sequential Three-Dimensional Stretch Bending: Analytical Springback Model

# publisherOf[].label
Detailed Results for Nitric Oxide Emissions as Determined From a Multiple-Zone Cycle Simulation for a Spark-Ignition Engine

# publisherOf[].label
Deploying Machine Learning (ML) for Improving Reliability and Resiliency of Thermal Energy Storage (TES) Platforms by Leveraging Phase Change Materials (PCM) for Sustainability Applications and Mitigating Food-Energy-Water (FEW) Nexus

# publisherOf[].label
A comparison of experimental rotordynamic coefficients and leakage characteristics between hole-pattern gas damper seals and a honeycomb seal

# publisherOf[].label
Comparative Analysis of Coefficient of Performance (COP) Correlations of Single-Effect Vapor Absorption Refrigeration (VAR) Cycle

# publisherOf[].label
Optimization of Trailing Edge Ejection Mixing Losses: A Theoretical and Experimental Study

# publisherOf[].label
Surface Effects on the Near-Tip Stresses for Mode-I and Mode-III Cracks

# publisherOf[].label
Biodiesel Effects on Influencing Parameters of Brake Fuel Conversion Efficiency in a Medium Duty Diesel Engine

# publisherOf[].label
EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF AERODYNAMIC BEHAVIOR OF A THREE-STAGE HP-TURBINE AT DIFFERENT OPERATING CONDITIONS

# publisherOf[].label
Heat Transfer in a Rotating, Blade-Shaped, Two-Pass Cooling Channel With Various 45-Deg Rib Turbulators and a Tip Turning Vane

# publisherOf[].label
DESIGN AND EVALUATION OF A MULTI-SENSOR UNIT FOR MEASURING PHYSIOLOGICAL STRESSORS OF MEDICAL TRANSPORT

# publisherOf[].label
A network approach to define modularity of product components

# publisherOf[].label
Electromechanical modeling of hybrid piezohydraulic actuator system for active vibration control

# publisherOf[].label
DYNAMIC ANALYSIS OF TURBULENT ANNULAR SEALS BASED ON HIRS LUBRICATION EQUATION

# publisherOf[].label
Theoretical Investigation of Autoignition of Combustible Gas Mixtures in Rapid Compression Machines

# publisherOf[].label
Bio-Inspired Avenues for Advancing Brain Injury Prevention

# publisherOf[].label
NUMERICAL AND MECHANISTIC MODELLING OF TWO-PHASE LIQUID -GAS FLOW'S PRESSURE DROP ACROSS SHARP -EDGED ORIFICES

# publisherOf[].label
A NEW HEAT-TRANSFER CORRELATION AND FLOW REGIME MAP FOR TUBE BUNDLES

# publisherOf[].label
TENSION METASTABLE FLUID DETECTION SYSTEMS FOR SPECIAL NUCLEAR MATERIAL DETECTION AND MONITORING

# publisherOf[].label
AN EXPERIMENTAL COMPARISON OF SEVERAL CURRENT VISCOPLASTIC CONSTITUTIVE MODELS AT ELEVATED-TEMPERATURE

# publisherOf[].label
Development of an automated control system verification platform for a solid oxide fuel cell

# publisherOf[].label
A study on control of accumulators in web processing lines

# publisherOf[].label
Novel Approach for Optical Characterization of Thrust Collar Lubricated Area: Experimental and Numerical Results

# publisherOf[].label
Discussion of "Non-Axisymmetric Flows and Rotordynamic Forces in an Eccentric Shrouded Centrifugal Compressor-Part 1: Measurement" (Song, J., Kim, S., Park, T. C., Cha, B.-J., Lim, D. H., Hong, J. S., Lee, T. W., and Song, S. J., ASME J. Eng. Gas Turbines Power, 141(11), p. 111014)

# publisherOf[].label
Effect of Blowing Ratio on the Film Cooling Effectiveness on a Flat Plate With Various Blockage Ratios

# publisherOf[].label
Measurement Versus Predictions of Rotordynamic Coefficients of a Hole-Pattern Gas Seal With Negative Preswirl

# publisherOf[].label
Computation of Lower Bounds for a Multiple Depot, Multiple Vehicle Routing Problem With Motion Constraints

# publisherOf[].label
UNSTEADY WAKE OVER A LINEAR TURBINE BLADE CASCADE WITH AIR AND CO2 FILM INJECTION .1. EFFECT ON HEAT-TRANSFER COEFFICIENTS

# publisherOf[].label
BUILDING ENERGY USE PREDICTION AND SYSTEM-IDENTIFICATION USING RECURRENT NEURAL NETWORKS

# publisherOf[].label
Evaluation of real-time torque-turn charts with application to intelligent make-up

# publisherOf[].label
Diameter and size distributions of Poly (lactide-co-glycolide) [PLG] based microspheres

# publisherOf[].label
ANALYSIS AND OPTIMIZATION OF A SHAPE MEMORY ALLOY-BASED SELF-FOLDING SHEET CONSIDERING MATERIAL UNCERTAINTIES

# publisherOf[].label
Thermal Response of Open-Cell Porous Materials: A Numerical Study and Model Assessment

# publisherOf[].label
RETROSPECTIVE TESTING OF AN AUTOMATED BUILDING COMMISSIONING ANALYSIS TOOL (ABCAT)

# publisherOf[].label
Harmonizing the Mooring System Reliability of Multiline Anchor Wind Farms

# publisherOf[].label
Film cooling effectiveness on the leading edge of a rotating film-cooled blade using pressure sensitive paint

# publisherOf[].label
Feedback Control Applied to Finite Element Models of Morphing Structures

# publisherOf[].label
Relative motion emulating robotic system as a test bed for aerial refueling using VISNAV and mobile stewart platforms

# publisherOf[].label
Print As a Dance Duet: Communication Strategies for Collision-Free Arm-Arm Coordination in Cooperative 3D Printing

# publisherOf[].label
Estimation of Room-Level Cooling Energy in Hot/Arid Climate by Machine Learning-Based Approaches

# publisherOf[].label
Tree-Based Ensemble Learning Models for Wall Temperature Predictions in Post-Critical Heat Flux Flow Regimes at Subcooled and Low-Quality Conditions

# publisherOf[].label
THE EFFECT OF FIBER CLUSTERS AND VOIDS ON THE COALESCENCE OF DEBONDS IN POLYMER MATRIX COMPOSITES

# publisherOf[].label
HYBRID FINITE-ELEMENT - BOUNDARY ELEMENT SIMULATION OF ROTATING MACHINERY SUPPORTED ON FLEXIBLE FOUNDATION AND SOIL

# publisherOf[].label
Computational Design of Compositionally Graded Alloys for Property Monotonicity

# publisherOf[].label
Application of Machine Learning for Enhancing the Transient Performance of Thermal Energy Storage Platforms for Supplemental or Primary Thermal Management

# publisherOf[].label
Stable Controller Interpolation and Controller Switching for LPV Systems

# publisherOf[].label
Tracheal Cartilage Ring Biomechanical Properties for Pediatric Exostent Design

# publisherOf[].label
NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF AN ORIFICE TYPE CRYOGENIC PULSE TUBE REFRIGERATOR

# publisherOf[].label
Method and Detailed Analysis of Individual Hydrocarbon Species From Diesel Combustion Modes and Diesel Oxidation Catalyst

# publisherOf[].label
ONE EXPLANATION FOR 2N RESPONSE DUE TO MISALIGNMENT IN ROTORS CONNECTED BY FLEXIBLE COUPLINGS

# publisherOf[].label
EXPERIMENTAL STUDY OF HELIX-FINNED SURFACE FOR NUCLEATE POOL BOILING

# publisherOf[].label
The Evolution of Computational Methods in Aerodynamics

# publisherOf[].label
Towards Failure Modeling in Complex Dynamic Systems: Impact of Design and Manufacturing Variations

# publisherOf[].label
Computational Design of Gradient Paths in Additively Manufactured Functionally Graded Materials

# publisherOf[].label
Assessment of Binary Pressure Sensitive Paint for Temperature and Heat Transfer Coefficient Measurement of Leading Edge Film Cooling

# publisherOf[].label
NUMERICAL STUDY ON COOLING CHARACTERISTICS OF DOUBLE-ROW CYLINDRICAL HOLES ON UPSTREAM ENDWALL

# publisherOf[].label
Ignition Chemistry of Syngas Highly Diluted in CO2

# publisherOf[].label
OPTIMIZATION OF STABILITY DISTRIBUTED CONTACT-AIDED COMPLIANT MECHANISMS IN A DYNAMIC STRUCTURE

# publisherOf[].label
FLUID FLOW AND HEAT TRANSFER OF LIQUID SODIUM IN SMALL-SCALE HEAT SINKS WITH DIFFERENT GEOMETRIES

# publisherOf[].label
Model-Based Dynamic Control of Active Thermal Management System

# publisherOf[].label
Numerical Study of Microchannel Heat Sinks With Non-Uniform Heat Flux Conditions

# publisherOf[].label
Modeling and simulation methods for MDOF structures and rotating machinery with impact dampers

# publisherOf[].label
TRIBOLOGICAL EVALUATION OF A HIGH-PERFORMANCE COMPOSITE COATING

# publisherOf[].label
BIOLOGICALLY INSPIRED CLOSED LOOP MANUFACTURING NETWORKS

# publisherOf[].label
A METHODOLOGY FOR THE COMPREHENSIVE ASSESSMENT OF INTERNATIONAL PROCUREMENT COSTS

# publisherOf[].label
Rotordynamic Coefficients Measurements Versus Predictions for a High Speed Flexure-Pivot Tilting-Pad Bearing (Load-Between-Pad Configuration)

# publisherOf[].label
A computational model for predicting damage evolution in laminated composite plates

# publisherOf[].label
Aeroelastic Suppression of Wind Turbine Blade Using Trailing-Edge Flap

# publisherOf[].label
Fluid Shear Stress Modulates S1P-Induced Endothelial Cell Invasion Into Three-Dimensional Matrices

# publisherOf[].label
Applied Tests of Design Skills-Part III: Abstract Reasoning

# publisherOf[].label
Flexure Behavior of Composite Spoolable Tubes

# publisherOf[].label
SIMULATIONS OF THE HINGE FLOW FIELDS OF A BILEAFLET MECHANICAL HEART VALVE UNDER PHYSIOLOGIC PULSATILE AORTIC CONDITIONS

# publisherOf[].label
Whole-Field Temperature and Velocity Measurements for Two-Phase Flow Using PIV/LIF

# publisherOf[].label
Pulsating Flow Past a Square Cylinder: Analysis of Force Coefficient Spectra and Vortex Structure Development

# publisherOf[].label
Nonlinear Kalman Filtering With Expensive Forward Models Via Measure Change

# publisherOf[].label
Special Section on Design and Fabrication of Microscale and Nanoscale Devices for Applications in Energy, Environment, and Medicine

# publisherOf[].label
EFFECT OF YIELD SURFACE CURVATURE ON NECKING AND FAILURE IN POROUS PLASTIC SOLIDS

# publisherOf[].label
Influence of heat treatment on the mechanical properties and damage development in a SiC/Ti-15-3 MMC

# publisherOf[].label
Governing Equations for Web Tension and Web Velocity in the Presence of Nonideal Rollers

# publisherOf[].label
Active Vibration Control of Rotating Machinery Using Piezoelectric Actuators Incorporating Flexible Casing Effects

# publisherOf[].label
Drilling Control System Using an Equivalent Input Disturbance-Based Control With a Neutral-Type Axial-Torsional Coupled Dynamics Model

# publisherOf[].label
Experimental Study of the Unsteady Boundary Layer Behavior on a Turbine Cascade

# publisherOf[].label
Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical End Seal: Centered Circular Orbit Tests

# publisherOf[].label
Rotordynamic Force Coefficients of a Hybrid Brush Seal: Measurements and Predictions

# publisherOf[].label
Use of differential scanning calorimetry and X-ray diffraction as experimental tools to understand how nucleating agent concentration affects supercooling in microencapsulated phase change materials

# publisherOf[].label
Ignition of lean CO/H₂/air mixtures at elevated pressures

# publisherOf[].label
Constitutive material modeling of cell: a micromechanics approach.

# publisherOf[].label
AN IMPROVED SUPPORT VECTOR DOMAIN DESCRIPTION METHOD FOR MODELING VALID SEARCH DOMAINS IN ENGINEERING DESIGN PROBLEMS

# publisherOf[].label
MECHANICS OF DEFORMATION-INDUCED DEGRADATION OF POLY(L-LACTIC ACID) ENDOVACULAR STENTS

# publisherOf[].label
VOID GROWTH IN AN ELASTIC-PLASTIC MEDIUM

# publisherOf[].label
LES of an Isothermal High Reynolds Number Turbulent Round Jet

# publisherOf[].label
Parametrization of All Stabilizing LTI Controllers for Multirate SISO Systems

# publisherOf[].label
SEAL-ROTORDYNAMIC-COEFFICIENT TEST-RESULTS FOR A MODEL SSME ATD-HPFTP TURBINE INTERSTAGE SEAL WITH AND WITHOUT A SWIRL BRAKE

# publisherOf[].label
EFFECT OF POLYMER CHAINS ON HEAT TRANSFER ON NANOFINS

# publisherOf[].label
Interactive Learning Platform for Turbine Design Using Reduced Order Methods

# publisherOf[].label
Dynamic Analysis of Floating Bodies Considering Multi-Body Interaction Effects

# publisherOf[].label
The Effect of Inlet Orifice on Critical Heat Flux and Flow Boiling Heat Transfer in Single Horizontal Microtube

# publisherOf[].label
DYNAMIC RESPONSE OF 3D-PRINTED BI-MATERIAL STRUCTURE USING DROP WEIGHT IMPACT TEST

# publisherOf[].label
Leakage and Dynamic Force Coefficients of a Pocket Damper Seal Operating Under a Wet Gas Condition: Tests Versus Predictions

# publisherOf[].label
Mixed Finite Element Models for Laminated Composite Plates

# publisherOf[].label
Engineering Design Tools for Shape Memory Alloy Actuators: CASMART Collaborative Best Practices and Case Studies

# publisherOf[].label
Mining Functional Model Graphs to Find Product Design Heuristics With Inclusive Design Illustration

# publisherOf[].label
The Influence of In Situ Reheat on Turbine-Combustor Performance

# publisherOf[].label
CHARACTERIZATION OF MICROMIST FOR EFFECTIVE MACHINING

# publisherOf[].label
Effect of Time-Dependent Boundary Conditions on Epidermal Tissue Damage During Port Wine Stain Laser Surgery

# publisherOf[].label
3D Core-Shell Simulation of Hydrogel Swelling Behavior for Controlled Drug Delivery

# publisherOf[].label
Spatial Manipulation in Virtual Peripersonal Space: A Study of Motor Strategies

# publisherOf[].label
A Novel Finite Element Model to Assess the Effect of Solid Stress Inside Tumors on Elastographic Normal Strains and Fluid Pressure

# publisherOf[].label
Numerical Simulation of a Microencapsulated Phase Change Material Slurry Flowing in a Helical Coil Heat Exchanger

# publisherOf[].label
Maglev Linear Actuator for Nanopositioning

# publisherOf[].label
Frontiers, Fundamentals, and Future Directions of Transport: From Theory to Applications - A Special Issue Honoring Dr. P. S. Ayyaswamy

# publisherOf[].label
Combined Effects of Freestream Pressure Gradient and Density Ratio on the Film Cooling Effectiveness of Round and Shaped Holes on a Flat Plate

# publisherOf[].label
The Effect of Nanoparticle Functionalization on Lubrication Performance of Nanofluids Dispersing Silica Nanoparticles in an Ionic Liquid

# publisherOf[].label
Heat Transfer in a Rotating, Blade-Shaped, Two-Pass Cooling Channel With Various 45 Deg Rib Turbulators and a Tip Turning Vane

# publisherOf[].label
The Numerical Investigation of a New Passive Micromixer With Improved Tesla Structure

# publisherOf[].label
The Influence of Transient Thermal Gradients and Substrate Constraint on Delamination of Thermal Barrier Coatings

# publisherOf[].label
Numerical Modeling and Analysis of Flexure-Pivot Tilting-Pad Bearing

# publisherOf[].label
Magnetohydrodynamic Turbulence Decay Under the Influence of Uniform or Random Magnetic Fields

# publisherOf[].label
Heat Transfer in a Rotating, Blade-Shaped Serpentine Cooling Passage With Discrete Ribbed Walls at High Reynolds Numbers

# publisherOf[].label
DETERMINING THE OPTIMUM NUMBER OF RFID READERS FOR EFFICIENT ASSET TRACKING

# publisherOf[].label
DESIGN OF A MINI HEAT SINK BASED ON CONSTRUCTAL THEORY FOR ELECTRONIC CHIP COOLING

# publisherOf[].label
High Rotation Number Effects on Heat Transfer in a Rectangular (AR=2:1) Two-Pass Channel

# publisherOf[].label
A NOVEL IMPACT DAMPER CONSISTING OF A LINEAR CHAIN OF PARTICLES

# publisherOf[].label
Designing Hybrid Neural Network Using Physical NeuronsA Case Study of Drill Bit-Rock Interaction Modeling

# publisherOf[].label
A comparison of rotordynamic-coefficient predictions for annular honeycomb gas seals using three different friction-factor models

# publisherOf[].label
AERODYNAMIC INVESTIGATION OF THE PERFORMANCE OF A TWO STAGE AXIAL TURBINE AT DESIGN AND OFF-DESIGN CONDITIONS

# publisherOf[].label
Modeling of Newtonian Fluids in Annular Geometries With Inner Pipe Rotation

# publisherOf[].label
Quantitative Measures for Design by Analogy

# publisherOf[].label
Constitutive Modeling of Asphalt Bound Granular Materials: Applications to Sand Asphalt

# publisherOf[].label
Analyses of Extreme Wave Heights in the Gulf of Mexico for Offshore Engineering Applications

# publisherOf[].label
First and Second Law Analyses of a Spark-Ignition Engine Using Either Isooctane or Hydrogen: An Initial Assessment

# publisherOf[].label
HEAT-TRANSFER CHARACTERISTICS OF TURBULENT-FLOW IN A SQUARE CHANNEL WITH ANGLED DISCRETE RIBS

# publisherOf[].label
IGNITION DELAY TIME EXPERIMENTS FOR NATURAL GAS/HYDROGEN BLENDS AT ELEVATED PRESSURES

# publisherOf[].label
A VIRTUAL FACTORY PLANNING AND ESTIMATION SYSTEM FOR ENGINEERING AND EDUCATION

# publisherOf[].label
The Effects of Cross Links on Adiabatic Two-Phase Flow Characteristics in Scaled Microchannel Heat Sinks

# publisherOf[].label
Influence of Nanoparticles on Spray Performance of Alternative Jet Fuels

# publisherOf[].label
On the physics of heat transfer and aerodynamic behavior of separated flow along a highly loaded low pressure turbine blade under periodic unsteady wake flow and varying of turbulence intensity

# publisherOf[].label
Fractional-Order Nonlinear Disturbance Observer Based Control of Fractional-Order Systems

# publisherOf[].label
Model-Based Analysis of a Photovoltaic Array Powering a Flywheel Energy Storage System

# publisherOf[].label
Impedance-Based Void Fraction Measurement and Flow Regime Identification in Microchannel Flows

# publisherOf[].label
Optimized Film Cooling Flow on a Contoured Endwall Within a Transonic Annular Cascade

# publisherOf[].label
A nonlinear viscoelastic modeling of fiber metal laminates

# publisherOf[].label
Effects of applied potential on friction of a piezoelectric material

# publisherOf[].label
Review of the uses and modeling of bitumen from ancient to modern times

# publisherOf[].label
Coupling of Volumetric Flowfield and Surface Effectiveness Measurements for Flat-Plate Film Cooling With Cylindrical Holes Using Tomographic Particle Image Velocimetry and Pressure-Sensitive Paint

# publisherOf[].label
Parametric Study and Experimental Correlation of an SMA Based Damping and Passive Vibration Isolation Device

# publisherOf[].label
Effects of High Frequency Droplet Train Impingement on Spreading-Splashing Transition, Film Hydrodynamics and Heat Transfer

# publisherOf[].label
Elastic Microplane Formulation for Transversely Isotropic Materials

# publisherOf[].label
INVESTIGATION OF PRESSURE LOSSES IN ECCENTRIC INCLINED ANNULI

# publisherOf[].label
Synthesis of Dynamic Vibration Absorbers

# publisherOf[].label
Tip Leakage Flow and Heat Transfer Characteristics on Rotor Casing and Blade Tip in an Axial Gas Turbine Engine: Steady Analysis

# publisherOf[].label
Temperature Compensation for Electromechanical Impedance Signatures With Data-Driven Modeling

# publisherOf[].label
Modeling of web slip on a roller and its effect on web tension dynamics

# publisherOf[].label
Film cooling effectiveness distribution on a gas turbine blade platform with inclined slot leakage and discrete film hole flows

# publisherOf[].label
Real-Time Identification of Incipient Surface Morphology Variations in Ultraprecision Machining Process

# publisherOf[].label
The Response of a Partially Confined Detonation Facility to Blast Loading

# publisherOf[].label
Experimental Investigations of a Comb-Like Film Cooling Scheme

# publisherOf[].label
Influence of Coolant Density on Turbine Blade Film Cooling at Transonic Cascade Flow Conditions Using the Pressure Sensitive Paint Technique

# publisherOf[].label
STAR-H2: The Secure Transportable Autonomous Reactor for Hydrogen Production and Desalinization

# publisherOf[].label
INVESTIGATION OF AERODYNAMICS AND HEAT TRANSFER OF A HIGHLY LOADED TURBINE BLADE USING THE UNIVERSAL INTERMITTENCY FUNCTION

# publisherOf[].label
Multi-Objective Optimization Design of Nonlinear Magnetic Bearing Rotordynamic System

# publisherOf[].label
Exploring the Use of Functional Models as a Foundation for Biomimetic Conceptual Design

# publisherOf[].label
Conceptual Analysis of Fission Fragment Magnetic Collimator Reactors

# publisherOf[].label
Experimental investigation of Reactor Cavity Cooling System (RCCS) for a very high temperature reactor (VHTR)

# publisherOf[].label
Rotordynamic Performance of a Negative-Swirl Brake for a Tooth-on-Stator Labyrinth Seal

# publisherOf[].label
A CFD Method for Axial Thrust Load Prediction of Centrifugal Compressors

# publisherOf[].label
Modeling the Effect of Surface Roughness on the Adhesion, Contact and Friction in Micro-Electro-Mechanical Systems (MEMS) Interfaces

# publisherOf[].label
New Steps to Improve Rotordynamic Stability Predictions of Centrifugal Compressors

# publisherOf[].label
Characteristics and Effects on a Machine-Tool Due to Grazing Motions of a Friction Boundary

# publisherOf[].label
COMPENSATION OF HVAC SYSTEM NONLINEARITIES USING CASCADED CONTROL ARCHITECTURE

# publisherOf[].label
Laminar Flame Speed Measurements and Modeling of Alkane Blends at Elevated Pressures With Various Diluents

# publisherOf[].label
The effect of periodic unsteady flow on aerodynamics and heat transfer on a curved surface

# publisherOf[].label
Investigation of Microbubble Boundary Layer Using Particle Image Velocimetry

# publisherOf[].label
Identification of Acoustic Characteristics of Honeycomb Sandwich Composite Panels Using Hybrid Analytical/Finite Element Method

# publisherOf[].label
Tunable Wave Propagation in Granular Crystals by Altering Lattice Network Topology

# publisherOf[].label
HEAT TRANSFER ENHANCEMENT FOR TURBINE BLADE INTERNAL COOLING

# publisherOf[].label
Computation of Flow and Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:1, AR=1:2, AR=1:4) With 45-deg. Angled Ribs by Reynolds Stress Turbulence Model

# publisherOf[].label
Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical End SealCentered Circular Orbit Tests

# publisherOf[].label
Two-Phase Flow Correlations as Applied to Pumping Well Testing

# publisherOf[].label
Experimentally tractable, pseudo-elastic constitutive law for biomembranes: I. Theory.

# publisherOf[].label
VERIFICATION ASSESSMENT OF THERMAL MODELS IN CONJUGATE HEAT TRANSFER ANALYSIS OF SMALL-SCALE HEAT SINKS

# publisherOf[].label
Theory Versus Experiment for the Effects of Pressure Ratio on the Performance of an Orifice-Compensated Hybrid Bearing

# publisherOf[].label
Modeling, Analysis, and Optimal Design of the Automotive Transmission Ball Capsule System

# publisherOf[].label
Machining Process Power Monitoring: Bayesian Update of Machining Power Model

# publisherOf[].label
A Hybrid Sensitivity Analysis for Use in Early Design

# publisherOf[].label
TWO-DIMENSIONAL NUMERICAL ANALYSES OF ACOUSTOPHORESIS PHENOMENA IN MICROFLUIDIC CHANNEL WITH MICROPARTICLE-SUSPENDED, VISCOUS, MOVING FLUID MEDIUM

# publisherOf[].label
Identification and Prediction of Force Coefficients in a Five-Pad and Four-Pad Tilting Pad Bearing for Load-on-Pad and Load-Between-Pad Configurations

# publisherOf[].id
 Experimental force coefficients derived from circular centered orbits

# publisherOf[].label
Squeeze film damper with a mechanical end seal

# publisherOf[].label
A Combinatorial Approach for Developing Ring Communication Graphs for Vehicle Formations

# publisherOf[].label
Investigation of Contact Stiffness and Contact Damping for Magnetic Storage Head-Disk Interfaces

# publisherOf[].label
THE USE OF A SIMPLE HEAT-TRANSFER MODEL FOR SEPARATED FLOWS IN TUBES

# publisherOf[].label
MEASUREMENTS OF LEAKAGE AND POWER LOSS IN A HYBRID BRUSH SEAL

# publisherOf[].label
Air Cycle Machine Modeling Applied to Aeronautical Air Conditioning Unit

# publisherOf[].label
RESIDENTIAL APPLIANCE USAGE PATTERNS FROM OVERALL ENERGY CONSUMPTION DATA: A STATISTICAL MACHINE LEARNING APPROACH

# publisherOf[].label
Evaluation of Near Frictionless Carbon Coatings Using Four-Ball Wear Tester

# publisherOf[].label
Constant spacing strategies for platooning in Automated Highway Systems

# publisherOf[].label
Intermittency based unsteady boundary layer transition modeling, implementation into Navier-Stokes equations

# publisherOf[].label
The impact of real gas properties on predictions of static and rotordynamic properties of the annular gas seals for injection compressors

# publisherOf[].label
Balancing the Speed and Fidelity of Automotive Powertrain Models Through Surrogation

# publisherOf[].label
Design of Simulation Tools for Trainig Programs in Lean Manufacturing

# publisherOf[].label
Stability Analysis of the Wing Leading Edge Spar of a Passively Morphing Ornithopter

# publisherOf[].label
CASING POINT SELECTION FOR DRILLING OPERATIONS AT SHALLOW DEPTHS

# publisherOf[].label
ASSESSMENT OF A DOUBLE HOLE FILM COOLING GEOMETRY USING S-PIV AND PSP

# publisherOf[].label
The Space Shuttle Main Engine High-Pressure Fuel Turbopump Rotordynamic Instability Problem

# publisherOf[].label
HIGH-SPEED SPECTRALLY RESOLVED IMAGING STUDIES OF SPHERICALLY EXPANDING NATURAL GAS FLAMES UNDER GAS TURBINE OPERATING CONDITIONS

# publisherOf[].label
Confocal image-based computational modeling of nitric oxide transport in a rat mesenteric lymphatic vessel.

# publisherOf[].label
Forced Coefficients for a Short Length, Open Ends Squeeze Film Damper With End Grooves: Experiments and Predictions

# publisherOf[].label
A General Approach for Current-Based Condition Monitoring of Induction Motors

# publisherOf[].label
A Framework to Study Human-AI Collaborative Design Space Exploration

# publisherOf[].label
Local Heat/Mass Transfer Distributions Around Sharp 180 deg Turns in Two-Pass Smooth and Rib-Roughened Channels

# publisherOf[].label
Second-order vertical diffraction forces on truncated cylinders

# publisherOf[].label
Effect of tribochemical interactions on friction and wear of highly hydrogenated DLC films

# publisherOf[].label
WIRELESS, BATTERY FREE WEARABLE ELECTRONIC NOSE

# publisherOf[].label
Experimental Study of a Novel Hydro-Cyclone Apparatus (HCA) using Flash Evaporation for Desalination and Water Remediation/Purification

# publisherOf[].label
Evaluation of magnetic resonance velocimetry for steady flow.

# publisherOf[].label
CHARACTERIZATION OF HIGH-DENSITY WC-CO BULK STRUCTURES FABRICATED BY SELECTIVE LASER MELTING

# publisherOf[].label
Upstream Film Cooling on the Contoured Endwall of a Transonic Turbine Vane in an Annular Cascade

# publisherOf[].label
Design Tools for Patterned Self-Folding Reconfigurable Structures Based on Programmable Active Laminates

# publisherOf[].label
An Initial Guess Free Method for Least Squares Parameter Estimation in Nonlinear Models

# publisherOf[].label
Turbulence structure modification and drag reduction by microbubble injections in a boundary layer channel flow

# publisherOf[].label
Developing Variational Vibration Models of Damaged Beams: Toward Intelligent Failure Detection

# publisherOf[].label
LAMINAR FLOW FORCED CONVECTION HEAT TRANSFER BEHAVIOR OF A PHASE CHANGE MATERIAL FLUID IN MICROCHANNELS

# publisherOf[].label
Control Strategies for Distributed Real-Time Control With Time Delays and Packets Losses

# publisherOf[].label
Flow Boiling Heat Transfer in a Silicon Microchannel Heat Sink Using Liquid Crystal Thermography

# publisherOf[].label
ELECTRICAL IMPEDANCE SPECTROSCOPY MICROSYSTEM AS A TOOL FOR CANCER CELL ANALYSIS

# publisherOf[].label
Numerical Investigation on the Selection of the System Outputs for Feedback Vibration Control of a Smart Blade Section

# publisherOf[].label
NUMERICAL EVALUATION OF PRESSURE DROP ACROSS ORIFICES FOR DIFFERENT GAS-LIQUID MIXTURES

# publisherOf[].label
Autonomous Control Strategies for Very High Temperature Reactor Based Systems for Hydrogen Production

# publisherOf[].label
Investigating a Mixed-Initiative Workflow for Digital Mind-Mapping

# publisherOf[].label
AN EXPERIMENTAL AND NUMERICAL STUDY OF THE EFFECTS OF FLOW INCIDENCE ANGLES ON THE PERFORMANCE OF A STATOR BLADE CASCADE OF A HIGH PRESSURE STEAM TURBINE

# publisherOf[].label
ECOLOGICAL ROBUSTNESS AS A DESIGN PRINCIPLE FOR SUSTAINABLE INDUSTRIAL SYSTEMS

# publisherOf[].label
EXPERIMENTAL STUDY OF A SINGLE MICROCHANNEL FLOW UNDER NON-UNIFORM HEAT FLUX

# publisherOf[].label
An Immersed Boundary Method for Calculating the Relative Viscosity of a Suspension of Rigid Particles

# publisherOf[].label
Hydrocarbon Fueled Operation of Metal-Supported Solid Oxide Fuel Cell

# publisherOf[].label
The Solid-State Neck Growth Mechanisms in Low Energy Laser Sintering of Gold Nanoparticles: A Molecular Dynamics Simulation Study

# publisherOf[].label
A Computational Fluid Dynamic (CFD) Tool for Optimization and Guided Implantation of Biomedical Devices

# publisherOf[].label
HEAD LOSS THROUGH FIBROUS BEDS GENERATED ON DIFFERENT TYPES OF CONTAINMENT SUMP STRAINERS

# publisherOf[].label
A Study of the Heat Transfer in Winglet and Squealer Rotor Tip Configurations for a Non-Cooled HPT Blade Based on CFD Calculations

# publisherOf[].label
RESPONSE EFFECTS DUE TO POLYGONAL REPRESENTATION OF PORES IN POROUS MEDIA THERMAL MODELS

# publisherOf[].label
Experimental Investigations of the Film Cooling Performance of a Micro-Tangential-Jet Scheme on a Gas Turbine Vane: Part 1  Effectiveness

# publisherOf[].label
Experimental Force Coefficients for a Fully-Partitioned Pocket Damper Seal and Comparison to Other Two Seal Types

# publisherOf[].label
Active Control of Transient Rotordynamic Vibration by Optimal Control Methods

# publisherOf[].label
EXPERIMENTAL STUDY OF THE STATIC AND DYNAMIC CHARACTERISTICS OF A LONG (L/D=0.75) LABYRINTH ANNULAR SEAL OPERATING UNDER TWO-PHASE (LIQUID/GAS) CONDITIONS

# publisherOf[].label
ADDITIONAL TEST-RESULTS FOR ROUND-HOLE-PATTERN DAMPER SEALS - LEAKAGE, FRICTION FACTORS, AND ROTORDYNAMIC FORCE COEFFICIENTS

# publisherOf[].label
Heat Transfer in Rotating, Trailing Edge, Converging Channels With Full- and Partial-Height Strip-Fins

# publisherOf[].label
Magnetically Suspended VSCMGs for Simultaneous Attitude Control and Power Transfer IPAC Service

# publisherOf[].label
Effects of thermomechanical coupling and relaxation times on wave spectrum in dynamic theory of generalized thermoelasticity

# publisherOf[].label
Bandwidth Allocation of Networked Control Systems With Exponential Approximation

# publisherOf[].label
Fuel flexibility influences on premixed combustor blowout, flashback, autoignition, and stability

# publisherOf[].label
Heat transfer dynamics during treatment of port wine stain birthmarks with multiple-intermittent cryogen spurts and laser pulses

# publisherOf[].label
Use of Perforation and Mathematical Modeling to Increase Solar-Based Steam Distillation System Efficiency

# publisherOf[].label
COMPARATIVE ENERGY AND EXERGY ANALYSIS OF LARGE CAPACITY AMMONIAWATER AND WATER-LITHIUM BROMIDE VAPOR ABSORPTION REFRIGERATION (VAR) CYCLES

# publisherOf[].label
UNUSUAL HEAT TRANSFER CHARACTERISTICS OF SUPERCRITICAL CARBON DIOXIDE

# publisherOf[].label
OPTIMUM DESIGN OF SPREAD MOORING SYSTEMS

# publisherOf[].label
AN IMPROVED ELASTIC CONTACT MODEL ACCOUNTING FOR ASPERITY INTERACTION AND BULK SUBSTRATE DEFORMATION

# publisherOf[].label
Measurement and Prediction of the Journal Circumferential Temperature Distribution for the Rotordynamic Morton Effect

# publisherOf[].label
SHUTTERED PASSIVE INFRARED SENSOR FOR OCCUPANCY DETECTION: EXPLORING A LOW POWER ELECTRO-MECHANICAL DRIVING APPROACH

# publisherOf[].label
FLUID FLOW MIXING OF TURBULENT JETS WITHIN A STAGGERED ROD BUNDLE

# publisherOf[].label
ADVANCED MOX AND IMF FUEL ASSEMBLY DESIGNS FOR MULTI-RECYCLING TRANSURANICS

# publisherOf[].label
Performance evaluation of half-wetted hydrodynamic bearings with DLC coated surfaces

# publisherOf[].label
Comparative Study of Wave Run-Up and Slamming Occurrence for Multi-Unit Floating Offshore Wind Turbine Platform: Numerical Simulation vs. Model Test

# publisherOf[].label
Bayesian Calibration and Uncertainty Quantification for a Physics-Based Precipitation Model of Nickel-Titanium Shape-Memory Alloys

# publisherOf[].label
Spectral Dynamics in a Channel Flow With Microbubbles

# publisherOf[].label
Double Overhung Disk and Parameter Effect on Rotordynamic Synchronous Instability-Morton Effect-Part II: Occurrence and Prevention

# publisherOf[].label
PROCESSING-MECHANICAL PROPERTY RELATIONSHIP OF HOLLOW AND POROUS CARBON FIBERS FABRICATED BY COAXIAL ELECTROSPINNING

# publisherOf[].label
Experimental Investigation of Film Cooling Performance for a New Shaped Hole at the Leading Edge

# publisherOf[].label
GUIDED WAVE PROPAGATION IN TUBULAR SECTION WITH MULTI-LAYERED VISCOELASTIC COATING PART I - AXIAL WAVES

# publisherOf[].label
A Unified Mechanistic Model to Classify Flow Patterns and Predict Pressure Drops in OilWater Pipeline Systems

# publisherOf[].label
Prediction of Aeroacoustic Resonance in Cavities of Hole-Pattern Stator Seals

# publisherOf[].label
LAMINAR FLOW FORCED CONVECTION HEAT TRANSFER BEHAVIOR OF PHASE CHANGE MATERIAL FLUID IN MICROCHANNELS WITH STAGGERED PINS

# publisherOf[].label
TURBULENT CONVECTION FROM DETERMINISTIC ROUGHNESS DISTRIBUTIONS WITH VARYING THERMAL CONDUCTIVITIES

# publisherOf[].label
Fiber-optic strain gauge calibration and dynamic flexibility transfer function identification in magnetic bearings

# publisherOf[].label
Experimental Identification of Dynamic Force Coefficients for a 110 MM Compliantly Damped Hybrid Gas Bearing

# publisherOf[].label
DESIGN OPTIMIZATION OF A COMPLIANT SPINE FOR DYNAMIC APPLICATIONS

# publisherOf[].label
ASYMPTOTIC EXPANSION HOMOGENIZATION METHOD FOR CARBON FIBER COMPOSITE STRUCTURES REINFORCED WITH CARBON NANOTUBES

# publisherOf[].label
On the Relationship Between Heat Transfer and Drag Reductions for Polymer and Surfactant Solutions

# publisherOf[].label
Special Section: 11th International Conference on Thermal Engineering, 2018

# publisherOf[].label
ACTIVE ARTIFICIAL HAIR CELLS USING NONLINEAR FEEDBACK CONTROL

# publisherOf[].label
Validation of Low and High-Fidelity Turbulence Models for Prediction of Turbulent Heat Transfer in Low Prandtl Number Flows Under Buoyant and Separated Flow Conditions

# publisherOf[].label
GAN-DUF: Hierarchical Deep Generative Models for Design Under Free-Form Geometric Uncertainty

# publisherOf[].label
CFD SIMULATION OF THREE PHASE GAS-LIQUID-SOLID FLOW IN HORIZONTAL PIPES

# publisherOf[].label
Thermal Properties of Green Roof Media During Plant Establishment and Growth

# publisherOf[].label
Design and Validation of Fault Diagnoser Based on Finite State Automaton and Sequential Function Chart for PLC Based Manufacturing System

# publisherOf[].label
Applied Tests of Design Skills-Part 1: Divergent Thinking

# publisherOf[].label
IMPACT PRESSURE, VOID FRACTION, AND GREEN WATER VELOCITY DUE TO PLUNGING BREAKING WAVE IMPINGEMENT ON A 2D TENSION-LEG STRUCTURE

# publisherOf[].label
EMPIRICAL STUDIES OF DESIGN THINKING: PAST, PRESENT, FUTURE

# publisherOf[].label
Wavelet Spatial Energy Spectrums Studies on Drag Reduction by Microbubble Injection

# publisherOf[].label
Surface Finish of Ball-End Milled Microchannels

# publisherOf[].label
Design of Stretchable Electronics Against Impact.

# publisherOf[].label
Analysis of Performance and Rotordynamic Force Coefficients of Brush Seals With Reverse Rotation Ability

# publisherOf[].label
Suppression of Persistent Rotor Vibrations Using Adaptive Techniques

# publisherOf[].label
The acoustic influence of cell depth on the rotordynamic characteristics of smooth-rotor/honeycomb-stator annular gas seals

# publisherOf[].label
Smart Manufacturing: State-of-the-Art Review in Context of Conventional and Modern Manufacturing Process Modeling, Monitoring and Control

# publisherOf[].label
SELF-POWERED INTERFACE EXTERNAL CIRCUIT FOR LOW-FREQUENCY ACOUSTIC ENERGY HARVESTER

# publisherOf[].label
A Case Study of Retrofitting a Demonstration Solar Energy Building

# publisherOf[].label
Development of a Computer Model for Solar Simulation and Shaded Fenestration Design

# publisherOf[].label
Numerical Analysis of Circular Graphene Bubbles

# publisherOf[].label
Influence of Variable Geometry Transients on the Gas Turbine Performance

# publisherOf[].label
Characteristic response of a production diesel oxidation catalyst exposed to lean and rich PCI exhaust

# publisherOf[].label
Electromechanical Impedance Based Part Identification via Linear Projection

# publisherOf[].label
An Experimental Investigation of the Effects of the Environmental Conditions and the Channel Depth for an Air-Breathing Polymer Electrolyte Membrane Fuel Cell

# publisherOf[].label
Turbulent Heat Transfer Measurements on a Wall With Concave and Cylindrical Dimples in a Square Channel

# publisherOf[].label
Local Heat Transfer Coefficients Induced by Piezoelectrically Actuated Vibrating Cantilevers

# publisherOf[].label
On the Reliability of RANS and URANS Numerical Results for High-Pressure Turbine Simulations: A Benchmark Experimental and Numerical Study on Performance and Interstage Flow Behavior of High-Pressure Turbines at Design and Off-Design Conditions Using Two Different Turbine Designs

# publisherOf[].label
Investigation of drug release from biodegradable PLG microspheres: Experiment and theory

# publisherOf[].label
Smoothed Particle Hydrodynamics Simulation of Flow Through a Bileaflet Mechanical Heart Valve: Advantages and Prospects

# publisherOf[].label
A Time Integration Algorithm for Nonlinear Viscoelastic Behaviors of Orthotropic Media

# publisherOf[].label
A Component Taxonomy as a Framework for Computational Design Synthesis

# publisherOf[].label
The Use of a Three-Zone Combustion Model to Determine Nitric Oxide Emissions From a Homogeneous-Charge, Spark-Ignited Engine

# publisherOf[].label
MITIGATION OF MILLING CHATTER AT HIGH SPEED

# publisherOf[].label
Quantification of uncertainty in reserves estimation from decline curve analysis of production data for unconventional reservoirs

# publisherOf[].label
Heat (mass) transfer distribution in a two-pass trapezoidal channel with a 180 deg turn

# publisherOf[].label
Effect of Unsteady Wake Passing Frequency on Boundary Layer Transition, Experimental Investigation and Wavelet Analysis

# publisherOf[].label
Effects of Operating Temperature on the Heat Transfer Characteristics of Photovoltaic Systems in the Upper Midwest

# publisherOf[].label
Measurements Versus Predictions for the Static and Dynamic Characteristics of a Four-Pad, Rocker-Pivot, Tilting-Pad Journal Bearing

# publisherOf[].label
Analysis of Clustering and Interphase Region Effects on the Electrical Conductivity of Carbon Nanotube-Polymer Nanocomposites via Computational Micromechanics

# publisherOf[].label
REDUCED-ORDER MODEL OF UNSTEADY FLOWS IN A TURBOMACHINERY FAN MODELED USING A NOVEL PROPER ORTHOGONAL DECOMPOSITION

# publisherOf[].label
Combustion and Oxidation of Lube Oils at Gas Turbine Conditions: Experimental Methods

# publisherOf[].label
Effects of Fluid Shear Stress on Endothelial Cell Invasion Into Three-Dimensional Matrices

# publisherOf[].label
Optimal Bandwidth Allocation and QoS-Adaptive Control Co-Design for Networked Control Systems

# publisherOf[].label
DSMC Simulation of Subsonic Flows in Parallel and Series Microchannels

# publisherOf[].label
ANALYSIS OF RCCS HEAT EXCHANGE FOR BENCHMARKING OF CFD CODES

# publisherOf[].label
INFLUENCE OF JET-GRID TURBULENCE ON FLAT-PLATE TURBULENT BOUNDARY-LAYER FLOW AND HEAT-TRANSFER

# publisherOf[].label
Influence of entrance geometry on heat transfer in rotating rectangular cooling channels (AR=4:1) with angled ribs

# publisherOf[].label
A Comparison of Coulomb Friction and Friction Stress Models Based on Multidimensional Nanocontact Experiments

# publisherOf[].label
Thermohydrodynamic analysis of process-liquid hydrostatic journal bearings in turbulent regime .2. Numerical solution and results

# publisherOf[].label
Geometric and Hemodynamic Evaluation of 3-Dimensional Reconstruction Techniques for the Assessment of Coronary Artery Wall Shear Stress in the Setting of Clinical Disease Progression

# publisherOf[].label
Theories and Computational Models for Composite Laminates

# publisherOf[].label
IMPLICATIONS OF INCREASED LOWER EXTREMITY MOVEMENT VARIABILITY ON FALL SUSCEPTIBILITY AT INCREASED STRIDE LENGTHS DURING LOCOMOTION

# publisherOf[].label
Adaptive controller and observer design for a class of nonlinear systems

# publisherOf[].label
Adaptive control of mechanical systems with time-varying parameters and disturbances

# publisherOf[].label
Computational Fluid Dynamics Simulation of the Transient Behavior of Liquid Loading in Gas Wells

# publisherOf[].label
Investigation of Bubble Frequency for Slug Flow Regime in a Uniformly Heated Horizontal Microchannel

# publisherOf[].label
Experimental Investigation of Molten Salt Nanofluid for Solar Thermal Energy Application

# publisherOf[].label
A VALIDATION EXPERIMENT FOR TURBULENT MIXING IN A COLLATED JET

# publisherOf[].label
Rotordynamic Stability Predictions for Centrifugal Compressors Using a Bulk-Flow Model to Predict Impeller Shroud Force and Moment Coefficients

# publisherOf[].label
NUMERICAL INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS OF A NOVEL WAVY-TAPERED MICROCHANNEL HEAT SINK

# publisherOf[].label
Modeling hourly energy use in commercial buildings with Fourier series functional forms

# publisherOf[].label
A Modular Design Approach to Support Sustainable Design

# publisherOf[].label
A Gaussian Process Model-Guided Surface Polishing Process in Additive Manufacturing

# publisherOf[].label
Lubrication With Binary Mixtures: Liquid-Liquid Emulsion

# publisherOf[].label
Computation of flow and heat transfer in rotating rectangular channels (AR=4 : 1) with pin-fins by a Reynolds stress turbulence model

# publisherOf[].label
A Rotor-Fixed Modal Simulation Model for Flexible Rotating Equipment

# publisherOf[].label
A single integral finite strain viscoelastic model of ligaments and tendons.

# publisherOf[].label
APIX: Analysis From Pixellated Inputs in Early Design Using a Pen-Based Interface

# publisherOf[].label
PROMOTING LIFE-LONG LEARNING SKILLS IN CAD USING THE PEER-GENERATED SCREENCAST TUTORIALS

# publisherOf[].label
The fault-tolerant control of magnetic bearings with reduced controller outputs

# publisherOf[].label
Investigation of Shear-Thinning Behavior on Film Thickness and Friction Coefficient of Polyalphaolefin Base Fluids With Varying Olefin Copolymer Content

# publisherOf[].label
Experimental Mapping of Local Heat Transfer Coefficients Under Multiple Piezoelectric Fans

# publisherOf[].label
On Characterizing and Assessing the Validity of Behavioral Models and Their Predictions

# publisherOf[].label
DEVELOPING BIOMIMETIC GUIDELINES FOR THE HIGHLY OPTIMIZED AND ROBUST DESIGN OF COMPLEX PRODUCTS OR THEIR COMPONENTS

# publisherOf[].label
A Capacity Planning Model for Microgrids in Rural India

# publisherOf[].label
FINITE-ELEMENT SIMULATIONS OF FIBER PULL-OUT

# publisherOf[].label
CONTROL OF HIGH SPEED MILLING CHATTER IN SIMULTANEOUS TIME-FREQUENCY DOMAIN

# publisherOf[].label
Robust Adaptive Control of Nonlinear Systems With Input/Output Delays

# publisherOf[].label
Characterization of an Apparatus to Study Solid Deposit Formation in Lubricating Oils at High Temperatures

# publisherOf[].label
Effect of Flow Acceleration on Mainstream-to-Coolant Flow Interaction for Round and Shaped Film Cooling Holes

# publisherOf[].label
INVESTIGATION OF GAS-LIQUID FLOW USING ELECTRICAL RESISTANCE TOMOGRAPHY AND WAVELET ANALYSIS TECHNIQUES FOR EARLY KICK DETECTION

# publisherOf[].label
Workpiece Thermal Distortion in Minimum Quantity Lubrication Deep Hole Drilling-Finite Element Modeling and Experimental Validation

# publisherOf[].label
Rotordynamic Force Prediction of Whirling Centrifugal Impeller Shroud Passages Using Computational Fluid Dynamic Techniques

# publisherOf[].label
Review on the Constitutive Models of Tumor Tissue for Computational Analysis

# publisherOf[].label
AN IWATSUBO-BASED SOLUTION FOR LABYRINTH SEALS - COMPARISON TO EXPERIMENTAL RESULTS

# publisherOf[].label
A Study on the Leakage and Rotordynamic Coefficients of a Long-Smooth Seal With Laminar-Two-Phase, Mainly-Oil Mixtures

# publisherOf[].label
ShapOrator: Enabling Design Iteration for Young Designers Through Shape Verbalization

# publisherOf[].label
PREDICTION OF AEROACOUSTIC RESONANCE IN CAVITIES OF HOLE-PATTERN STATOR SEALS

# publisherOf[].label
DEVELOPING COMPUTATIONAL FLOW MODELS FOR THE LYMPHATIC VASCULATURE

# publisherOf[].label
Transient Behavior of Near Frictionless Carbon Films in Reciprocating Microtribometery in Low Humidity Inert Environments

# publisherOf[].label
Combined Steady State and Transient Analysis of a Patrol Vessel as Affected by Varying Amounts of Damping and Periodic and Random Wave Excitation

# publisherOf[].label
Numerical Simulation of Film Cooling on Rotating Blade Tips within a High-Pressure Turbine

# publisherOf[].label
A System to Package Perspective on Transient Thermal Management of Electronics

# publisherOf[].label
Dynamic Force Response of an Open Ended Squeeze Film Damper

# publisherOf[].label
Using Parameterized Pareto Sets to Model Design Concepts

# publisherOf[].label
Evaluation of a statistical method for assessing infill production potential in mature, low-permeability gas reservoirs

# publisherOf[].label
MOB Platform Nonlinear Dynamics in a Realistic (Random) Seaway

# publisherOf[].label
Rotordynamic Force Prediction of a Shrouded Centrifugal Pump Impeller-Part I: Numerical Analysis

# publisherOf[].label
Design of a Decentralized Detection Filter for a Class of Interconnected Systems

# publisherOf[].label
Ignition and Oxidation of 50/50 Butane Isomer Blends

# publisherOf[].label
Measurements Versus Predictions for the Rotordynamic Characteristics of a Five-Pad Rocker-Pivot Tilting-Pad Bearing in Load-Between-Pad Configuration

# publisherOf[].label
Rotordynamic force prediction of whirling centrifugal impeller shroud passages using computational fluid dynamic techniques

# publisherOf[].label
EFFECT OF COATING THICKNESS ON TRIBOLOGICAL PERFORMANCE OF CrN IN DRY SLIDING CONTACT

# publisherOf[].label
On the Energy Release Rate During Global Thermo-Mechanically-Induced Phase Transformation in Shape Memory Alloys

# publisherOf[].label
TURBULENT TRANSVERSE PLANE PIV MEASUREMENTS ON A WIRE-WRAPPED 61-PIN HEXAGONAL FUEL BUNDLE

# publisherOf[].label
Modeling of the Onset of Gas Entrainment Through a Finite-Side Branch

# publisherOf[].label
Mathematical Modeling of High Velocity Oxygen Fuel Thermal Spraying: An Overview

# publisherOf[].label
Theoretical and experimental study of development of two-dimensional steady and unsteady wakes within curved channels

# publisherOf[].label
ANALYTICAL MODEL TO PREDICT ANNUAL SOIL SURFACE-TEMPERATURE VARIATION

# publisherOf[].label
On the Leakage, Torque, and Dynamic Force Coefficients of Air in Oil (Wet) Annular Seal: A Computational Fluid Dynamics Analysis Anchored to Test Data

# publisherOf[].label
Thermal effects on polymer laminated steel formability in ironing

# publisherOf[].label
Designing Optimal Origami Structures by Computational Evolutionary Embryogeny

# publisherOf[].label
CHARACTERIZATION OF CO-CR-MO ALLOYS MANUFACTURING VIA DIRECTED ENERGY DEPOSITION

# publisherOf[].label
An analysis of intersonic crack growth under shear loading

# publisherOf[].label
Auto-Ignition of Gas Turbine Lubricating Oils in a Shock Tube Using Spray Injection

# publisherOf[].label
Periodic Disturbance Accommodating Control for Blade Load Mitigation in Wind Turbines

# publisherOf[].label
Biomedical Manufacturing: A Review of the Emerging Research and Applications

# publisherOf[].label
TEMPERATURE MEASUREMENTS OF THERMAL STRATIFICATION AND TURBULENT MIXING IN NUCLEAR SYSTEMS WITH A SINGLE HEATED JET

# publisherOf[].label
Effect of Coolant Ejection in Rectangular and Trapezoidal Trailing Edge Cooling Passages

# publisherOf[].label
HIGH ROTATION NUMBER EFFECTS ON HEAT TRANSFER IN A RECTANGULAR (AR=2:1) TWO PASS CHANNEL

# publisherOf[].label
Iterative Learning Control for a Type of Modified Smith Predictor

# publisherOf[].label
Dynamics and Control of a Differential Drive Robot With Wheel Slip: Application to Coordination of Multiple Robots

# publisherOf[].label
Simulations of Twin Turbulent Planar-Like Jets Injected Into a Large Volume Using RANS

# publisherOf[].label
WATER CHEMISTRY SENSITIVITY ON FIBROUS DEBRIS BYPASS THROUGH A CONTAINMENT SUMP STRAINER

# publisherOf[].label
ELECTROMECHANICAL SIMULATION AND TESTING OF ACTIVELY CONTROLLED ROTORDYNAMIC SYSTEMS WITH PIEZOELECTRIC ACTUATORS

# publisherOf[].label
Recent Studies on Buckling of Carbon Nanotubes

# publisherOf[].label
DATA-DRIVEN MODELING TECHNIQUES TO ESTIMATE DISPERSION RELATIONS OF STRUCTURAL COMPONENTS

# publisherOf[].label
Simulation, Test, and Mitigation of 1/2x Forward Whirl Following Rotor Drop Onto Auxiliary Bearings

# publisherOf[].label
THREE-DIMENSIONAL MODELING OF RATE-DEPENDENT DEFORMATION IN SHAPE MEMORY ALLOYS AT HIGH TEMPERATURES

# publisherOf[].label
A Theoretical Model of Stretch-Induced Stress Fiber Remodeling

# publisherOf[].label
Gas Turbine Transients With Controlled Variable Geometry

# publisherOf[].label
Influence of Entrance Geometry on Heat Transfer in Narrow Rectangular Cooling Channels (AR = 4:1) With Angled Ribs

# publisherOf[].label
A NOVEL NONLINEAR TIME-FREQUENCY STRATEGY FOR STABILIZING INVERTED PENDULUM CART SYSTEM

# publisherOf[].label
Tilting Pad Journal Bearings-A Discussion on Stability Calculation, Frequency Dependence, and Pad and Pivot

# publisherOf[].label
BOUNDARY AND MIXED FRICTION IN THE PRESENCE OF DYNAMIC NORMAL LOADS .2. FRICTION TRANSIENTS

# publisherOf[].label
VHTR-BASED SYSTEMS FOR AUTONOMOUS CO-GENERATION APPLICATIONS

# publisherOf[].label
Mixing Evaluation of a Passive Scaled-Up Serpentine Micromixer With Slanted Grooves

# publisherOf[].label
DEVELOPMENT OF AN EMERGENCY LANE CHANGE SYSTEM IN HIGHWAY DRIVING

# publisherOf[].label
Trajectory Tracking and Rate of Penetration Control of Downhole Vertical Drilling System

# publisherOf[].label
VIBRATION CHARACTERISTICS OF THE HPOTP (HIGH-PRESSURE OXYGEN TURBOPUMP) OF THE SSME (SPACE-SHUTTLE MAIN ENGINE)

# publisherOf[].label
Re-Assessment of Nitride Fuel Potential in the Current Context of the Nuclear Industry

# publisherOf[].label
Dynamic shear band development in plane strain

# publisherOf[].label
Toward an Early-Phase Conceptual System Design Risk-Informed Decision Making Framework

# publisherOf[].label
Characterization of Dynamical Instability Using Instantaneous Frequency

# publisherOf[].label
TURBULENT HEAT-TRANSFER AND FRICTION IN PIN FIN CHANNELS WITH LATERAL FLOW EJECTION

# publisherOf[].label
The Transport Mechanisms and Dynamics of Shale via Multiscale Multiphysics Pore Network Modeling

# publisherOf[].label
EXPLORING AUGMENTATION OF THERMAL-FLUID TRANSPORT IN FRACTAL ARCHITECTURES

# publisherOf[].label
AN ENTRANCE REGION FRICTION FACTOR MODEL APPLIED TO ANNULAR SEAL ANALYSIS - THEORY VERSUS EXPERIMENT FOR SMOOTH AND HONEYCOMB SEALS

# publisherOf[].label
Modal Analysis of an Ultra-Flexible, Self-Rigidizing Toroidal Satellite Component

# publisherOf[].label
Linear and Nonlinear Approach of Hydro-Pneumatic Tensioner Modeling for Spar Global Performance

# publisherOf[].label
Anti-Galling Effects of alpha-Zirconium Phosphate Nanoparticles as Grease Additives

# publisherOf[].label
Characteristics of Flow Boiling Oscillations in Silicon Microchannel Heat Sinks

# publisherOf[].label
Numerically Implemented Constitutive Model for SMA Applications Experiencing General Loads Resulting in Plastic Deformation and Large Rotations

# publisherOf[].label
Fluid-structure interaction in bi-leaflet mechanical heart valves

# publisherOf[].label
EFFECT OF NON UNIFORM OUT-OF-PLANE ILLUMINATION AND SHEAR RATE ON THE ACCURACY OF nPIV VELOCITY MEASUREMENTS

# publisherOf[].label
Mechanism of force generation in kinesin motility

# publisherOf[].label
Experimental Investigation of Louver Cooling Scheme on Gas Turbine Vane Pressure Side

# publisherOf[].label
EFFECT OF PAD FLEXIBILITY ON THE PERFORMANCE OF TILTING PAD JOURNAL BEARINGS - BENCHMARKING A PREDICTIVE MODEL

# publisherOf[].label
Laminar Flame Speed Measurements of Kerosene-Based Fuels Accounting for Uncertainties in Mixture Average Molecular Weight

# publisherOf[].label
Applying Functional Modeling as a Unifying Basis for Design for Six Sigma Execution

# publisherOf[].label
Dynamic Behavior of Cryogen Spray Cooling: Effect of Spray Distance

# publisherOf[].label
Experimental Study of a Negatively Buoyant Horizontal Jet in Wave Environment

# publisherOf[].label
Nitric Oxide Transport in Lymphatic Vessels

# publisherOf[].label
REDUCED PLATE MODEL USED FOR 2D TRAVELING WAVE PROPAGATION

# publisherOf[].label
A theoretical model of enlarging intracranial fusiform aneurysms.

# publisherOf[].label
Experimental Investigation of the Performance of a Novel Adiabatic Swirl-Flow Separation Apparatus in AirWater Two-Phase Flow

# publisherOf[].label
A Simplified Numerical Benchmark for Pool-Type Sodium Fast Reactors

# publisherOf[].label
The Effects of Plasma Pre-Cracking on Drilling of Hard Rocks: A Single Insert Cutting Experiment

# publisherOf[].label
Experimental Study of the Vascular Dynamics of a Saccular Basilar Aneurysm

# publisherOf[].label
Development of Two-Dimensional Wakes Within Curved Channels: Theoretical Framework and Experimental Investigation

# publisherOf[].label
The Effects of Implantation Orientation of a Bileaflet Mechanical Heart Valve in an Anatomic Left Ventricle-Aorta Configuration.

# publisherOf[].label
WASTE REDUCTION: A REVIEW OF COMMON OPTIONS AND ALTERNATIVES

# publisherOf[].label
Film-Cooling Effectiveness on a Rotating Blade Platform

# publisherOf[].label
Imbalance Detection and Health Monitoring From Gain Variations in an Adaptive Disturbance Rejection Controller

# publisherOf[].label
Turbulent Convection From Deterministic Roughness Distributions With Varying Thermal Conductivities

# publisherOf[].label
EXPERIMENTAL STUDY OF TEMPERATURE SENSITIVE DYES FOR PLANAR LASER INDUCED FLUORESCENCE THERMOMETER

# publisherOf[].label
High-Pressure Laminar Flame Speeds and Markstein Lengths of Syngas Flames Diluted in Carbon Dioxide and Helium

# publisherOf[].label
CHARACTERIZING STRAINS IN THE TIBIA OF HINDLIMB UNLOADED RATS DURING COMBINED ISOMETRIC AND ECCENTRIC STIMULATED MUSCLE CONTRACTION

# publisherOf[].label
Measurements Versus Predictions for a Hybrid (Hydrostatic Plus Hydrodynamic) Thrust Bearing for a Range of Orifice Diameters

# publisherOf[].label
Heat Transfer Analysis of a Novel Piezoelectric Air Pump

# publisherOf[].label
A FINITE-ELEMENT APPROACH TO PAD FLEXIBILITY EFFECTS IN TILT PAD JOURNAL BEARINGS .2. ASSEMBLED BEARING AND SYSTEM-ANALYSIS

# publisherOf[].label
In Vitro Mechanical Evaluation of Mandibular Bone Transport Devices

# publisherOf[].label
UNEVEN WALL TEMPERATURE EFFECT ON LOCAL HEAT-TRANSFER IN A ROTATING 2-PASS SQUARE CHANNEL WITH SMOOTH WALLS

# publisherOf[].label
IMPROVEMENT ON THE ACCURACY OF MEAN DRIFT FORCE CALCULATION

# publisherOf[].label
Procedures for calibrating hourly simulation models to measured building energy and environmental data

# publisherOf[].label
Float-off operation of a land-built cot on dual transportation barges: Time-vs. frequency-domain analysis

# publisherOf[].label
Project-Based Learning Applied in Turbopump Discipline at ITA Using 1D and 3D Numerical Simulations of a Booster Turbine Installed in the Space Shuttle Main Engine

# publisherOf[].label
Modeling of Crack Propagation in Defective X100 Line Pipes

# publisherOf[].label
Latent heat fluxes through soft materials with microtruss architectures

# publisherOf[].label
A STUDY OF EMBEDDED PIEZOELECTRIC LAYERS IN COMPOSITE CYLINDERS

# publisherOf[].label
Time and spatial pressure and velocity correlation in a microbubble laden boundary layer

# publisherOf[].label
A Quantitative Similarity Metric for Design-by-Analogy

# publisherOf[].label
Experimental Investigation of the Effect of Purge Flow on Film Cooling Effectiveness on a Rotating Turbine With Nonaxisymmetric End Wall Contouring

# publisherOf[].label
Experimental Investigation of a Scaled-Up Passive Curved Channel Micromixer With Slanted Grooves

# publisherOf[].label
Experimental Investigation of Film Cooling Effectiveness of a Highly Loaded Turbine Blade Under Steady and Periodic Unsteady Flow Conditions

# publisherOf[].label
Kinematics of Origami Structures With Smooth Folds

# publisherOf[].label
An Integrated Engineering Agriculture STEM Program

# publisherOf[].label
Length Effects on Fatigue Behavior of Longitudinal Pipeline Dents

# publisherOf[].label
On the Dynamic Short-Time Scale Wave Propagation and the Characterization of Optimal Packaging Material for High Performance Electronic Packages

# publisherOf[].label
NON-LINEAR DYNAMICS OF PARAMETRIC ROLL OF CONTAINER SHIP IN IRREGULAR SEAS

# publisherOf[].label
Identification and Prediction of Force Coefficients in a Five-Pad and Four-Pad Tilting Pad Bearing for Load-on-Pad and Load-Between-Pad Configurations

# publisherOf[].label
Ignition of lean methane-based fuel blends at gas turbine pressures

# publisherOf[].label
THE GENERAL-ELECTRIC COAL-FUELED DIESEL-ENGINE PROGRAM (1982-1993) - A TECHNICAL REVIEW

# publisherOf[].label
Design and Analysis of a Self-Folding SMA-SMP Composite Laminate

# publisherOf[].label
Microstructure, mechanical and tribological properties of reactive magnetron sputtered titanium carbide coatings

# publisherOf[].label
ENDWALL CONTOURING USING CONTINIOUS DIFFUSION, A BREAKTHROUGH METHOD AND ITS APPLICATION TO A THREE-STAGE HIGH PRESSURE TURBINE

# publisherOf[].label
GRAPHICAL MATERIAL SELECTION METHODS FOR MULTI-CONSTRAINT, MULTI-FUNCTIONAL COMPOSITES PRESSURE VESSELS

# publisherOf[].label
Carbon Capture Using Amine-Impregnated Mesoporous Sorbent in Fixed and Bubbling Beds

# publisherOf[].label
VALIDATION AND DEVELOPMENT OF DNS DATABASE FOR LOW PRANDTL NUMBERS IN ROD BUNDLE

# publisherOf[].label
Generating Technology Evolution Prediction Intervals Using a Bootstrap Method

# publisherOf[].label
HEAT-TRANSFER AND FRICTION IN RECTANGULAR CHANNELS WITH RIBBED OR RIBBED-GROOVED WALLS

# publisherOf[].label
Different Modes of Gas Entrainment Through Bottom Discharge Branch by Using Three Dimensional Particle Image Velocimetry System

# publisherOf[].label
Calibration procedure for energy performance simulation of a commercial building

# publisherOf[].label
Effect of Upstream Wake With Vortex on Turbine Blade Platform Film Cooling With Simulated Stator-Rotor Purge Flow

# publisherOf[].label
A Validation Study of an Automated Concept Generator Design Tool

# publisherOf[].label
Improving Tilting Pad Journal Bearing Predictions-Part I: Model Development and Impact of Rotor Excited Versus Bearing Excited Impedance Coefficients

# publisherOf[].label
Design and analysis of a disk drive actuator for commutational ramp loading

# publisherOf[].label
Heat Transfer in a Rotating, Blade-Shaped, Two-Pass Cooling Channel With Various 45-Deg Rib Orientations

# publisherOf[].label
PIV Investigation of the Effect of Freestream Turbulence Intensity on Film Cooling From Fanshaped Holes

# publisherOf[].label
Effect of Turbine Inlet Temperature on Blade Tip Leakage Flow and Heat Transfer

# publisherOf[].label
Friction Factor Jump in Honeycomb Seals Explained by Flow-Acoustic Interactions

# publisherOf[].label
Parameterized Design Optimization of a Magnetohydrodynamic Liquid Metal Active Cooling Concept

# publisherOf[].label
LAMINAR FLAME SPEED EXPERIMENTS OF ALTERNATIVE LIQUID FUELS

# publisherOf[].label
Experimental and Numerical Visualization of Counter Rotating Vortices

# publisherOf[].label
An algorithm for a near optimal NC path generation in staircase (lase) traversal of convex polygonal surfaces

# publisherOf[].label
Film-Cooling Performance Comparison of Blade Tips With a Trailing Edge, Pressure Side Cutback, or a Suction Side Squealer in a Transonic Linear Cascade

# publisherOf[].label
DESIGN AND POTENTIAL APPLICATION OF SMALL SCALE WAVE ENERGY CONVERTER

# publisherOf[].label
Flow and Heat Transfer in a Rotating Square Channel With 45 Angled Ribs by Reynolds Stress Turbulence Model

# publisherOf[].label
Motoric and Perceptual Kinesthetic Symmetry in Bi-Manual Interactions

# publisherOf[].label
CARBON DIOXIDE AND WATER MIXTURE IN PIPELINE FLOW SYSTEMS

# publisherOf[].label
MEASUREMENTS VERSUS PREDICTIONS FOR THE STATIC AND DYNAMIC CHARACTERISTICS OF A FOUR-PAD, ROCKER-PIVOT, TILTING-PAD JOURNAL BEARING

# publisherOf[].label
Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution

# publisherOf[].label
A Comparison of Graph-Theoretic Approaches for Resilient System of Systems Design

# publisherOf[].label
AERO-ELASTIC-FLOATER-MOORING COUPLED DYNAMIC ANALYSIS OF FOWT (FLOATING OFFSHORE WIND TURBINE) IN MAXIMUM OPERATION AND SURVIVAL CONDITIONS

# publisherOf[].label
Aerodynamic and Performance Studies of a Three-Stage High Pressure Research Turbine With 3-D - Blades, Design Point and Off-Design Experimental Investigations

# publisherOf[].label
Adaptive Control of Flow Over Rotating Wind Turbine Blades Using the Beddoes-Leishman Dynamic Stall Model

# publisherOf[].label
Simultaneous Output-Only Identification of Physical Parameters and Unknown Inputs for Linear Mechanical Systems

# publisherOf[].label
Effect of Properties and Turgor Pressure on the Indentation Response of Plant Cells

# publisherOf[].label
REVIEW OF PLATFORM COOLING TECHNOLOGY FOR HIGH PRESSURE TURBINE BLADES

# publisherOf[].label
A Compressed Sensing Approach to Uncertainty Propagation for Approximately Additive Functions

# publisherOf[].label
A COMPREHENSIVE REVIEW OF THREE-DIMENSIONAL NEURO-ORGANOIDS AND ENGINEERING BRAIN-ON-A-CHIP MICROFLUIDIC DEVICES

# publisherOf[].label
Intermittent behavior of the separated boundary layer along the suction surface of a low pressure turbine blade under periodic unsteady flow conditions

# publisherOf[].label
ESTIMATION OF THE STRESSES APPLIED ON ANEURYSM WALL BY THE EXPANSION OF SHAPE MEMORY POLYMER FOAM

# publisherOf[].label
Lubrication With Binary Mixtures: Bubbly Oil

# publisherOf[].label
Sub-Optimal Stationary Policies for a Class of Stochastic Optimization Problems Arising in Robotic Surveillance Applications

# publisherOf[].label
TURNING DYNAMICS PART 1: EXPERIMENTAL ANALYSIS

# publisherOf[].label
SYNTHESIZING ROBUST COMMUNICATION NETWORKS FOR UNMANNED AERIAL VEHICLES WITH RESOURCE CONSTRAINTS

# publisherOf[].label
Collision of Two Mass Baton With Massive External Surfaces

# publisherOf[].label
Exploring System of Systems Resilience Versus Affordability Trade-Space Using a Bio-Inspired Metric

# publisherOf[].label
SPATIAL-FILTERING CONCEPTS IN DISTRIBUTED PARAMETER CONTROL

# publisherOf[].label
DUAL GRADIENT DRILLING WILL CONTROL SHALLOW HAZARDS IN DEEPWATER ENVIRONMENTS

# publisherOf[].label
On the Generalization of Displacement-Based Laminate Theories

# publisherOf[].label
VALIDATION OF A NEW TURBULENT FLAME SPEED FACILITY FOR THE STUDY OF GAS TURBINE FUEL BLENDS AT ELEVATED PRESSURE

# publisherOf[].label
Special Issue: Artificial Intelligence and Engineering Design

# publisherOf[].label
The selective non-catalytic removal (SNCR) of nitric oxides from engine exhaust streams: Comparison of three processes

# publisherOf[].label
AUTONOMOUS CORIUM REACTOR FOR TERRESTRIAL APPLICATIONS

# publisherOf[].label
An Investigation of a Residential Solar System Coupled to a Radiant Panel Ceiling

# publisherOf[].label
Experimental Study on the Effect of Localized Blockages on the Friction Factor of a 61-Pin Wire-Wrapped Bundle

# publisherOf[].label
Vorticity Modification in a Turbulent Channel Flow by Microbubble Injection

# publisherOf[].label
EXPERIMENTAL CHARACTERIZATION AND MODELING OF CAPILLARY-PUMPED THIN-FILM EVAPORATION FROM MICROPILLAR WICKS

# publisherOf[].label
STATIC AND DYNAMIC COEFFICIENT MEASUREMENTS FOR A THRUST COLLAR USED IN AN INTEGRALLY GEARED COMPRESSOR

# publisherOf[].label
FRICTION FACTOR BEHAVIOR FROM FLAT-PLATE TESTS OF 12.15 mm DIAMETER HOLE-PATTERN ROUGHENED SURFACES

# publisherOf[].label
Modeling and Analysis of Web Span Tension Dynamics Considering Thermal and Viscoelastic Effects in Roll-to-Roll Manufacturing

# publisherOf[].label
Comparison of Thermal Performance of 3 D Printed Shell and Tube Heat Exchanger with Commercial Plate Heat Exchanger for Thermal Energy Storage (TES) by Incorporating Phase Change Materials (PCM)

# publisherOf[].label
ANALYSIS OF FORMATION OF THE CRITICAL STATE IN TENSILE FAILURE OF UNIDIRECTIONAL COMPOSITES

# publisherOf[].label
Full-Annulus Simulations of Airfoil Clocking in a 1-1/2 Stage Axial Compressor

# publisherOf[].label
Relationship Between Temperature Distribution and 2D Image of Condensation Jets Using Discrete Wavelets Multiresolution

# publisherOf[].label
A NUMERICAL STUDY ON CRACK GROWTH RESISTANCE CURVE OF X70 STEELS

# publisherOf[].label
A Novel Bulk-Flow Model for Improved Predictions of Force Coefficients in Grooved Oil Seals Operating Eccentrically

# publisherOf[].label
Thermal Characterization of a Turbulent Free Jet With Planar Laser-Induced Fluorescence

# publisherOf[].label
Deposition Velocity and Penetration Efficiency in a Square Channel Using a Lagrangian-Based Modeling Approach

# publisherOf[].label
Analytical Prediction of Periodic Motions in a Machine Tool With Loss of Effective Chip Contact

# publisherOf[].label
ANALYSIS-DRIVEN DESIGN OPTIMIZATION OF A SMA-BASED SLAT-COVE FILLER FOR AEROACOUSTIC NOISE REDUCTION

# publisherOf[].label
EXPERIMENTAL VALIDATION OF A SHAPE MEMORY ALLOY CONSTITUTIVE MODEL BY HETEROGENEOUS THERMAL LOADING USING INFRARED THERMOGRAPHY AND DIGITAL IMAGE CORRELATION

# publisherOf[].label
Closure to Discussion of Experimental Versus Theoretical Characteristics of a High-Speed Hybrid (Combination Hydrostatic and Hydrodynamic) Bearing (1993, ASME J. Tribol., 115, p. 168)

# publisherOf[].label
A PHYSICS-BASED MODELING APPROACH OF A NATURAL GAS HCCI ENGINE

# publisherOf[].label
Computationally Efficient Dynamics Modeling for Downhole Drilling System Integrating Finite Element and Transfer Matrix

# publisherOf[].label
COMPARISON OF FRACTURE MODELS TO QUANTIFY THE EFFECTS OF MATERIAL PLASTICITY ON THE DUCTILE FRACTURE PROPAGATION IN PIPELINES

# publisherOf[].label
AN EXPERIMENTAL STUDY OF WEDGE INDENTATION OF POROUS SOLIDS: IMPLICATIONS FOR CUTTING AND DRILLING PROCESSES

# publisherOf[].label
Cosine Error Elimination Method for One-Dimensional Convex and Concave Surface Profile Measurements

# publisherOf[].label
THERMAL-FLUID ANALYSIS AND OPTIMIZATION OF MICRO-SCALE HEAT SINKS WITH SLIP BOUNDARY CONDITION USING ENTROPY GENERATION MINIMIZATION METHOD

# publisherOf[].label
THE EFFECT OF PLATE SPACING ON FREE-CONVECTION BETWEEN HEATED PARALLEL PLATES

# publisherOf[].label
DETERMINATION OF DIMENSIONALITY OF POOL BOILING ON A THIN HORIZONTAL DISK UNDER SUBCOOLED CONDTIONS USING THIN-FILM THERMOCOUPLES

# publisherOf[].label
Effect of Unbalance Force Vector Orientation on the Whirl Response of Cracked Rotors

# publisherOf[].label
A Numerical Study of Flow and Heat Transfer in Rotating Rectangular Channels (AR=4) With 45 Rib Turbulators by Reynolds Stress Turbulence Model

# publisherOf[].label
Thermodynamic Study on Blends of Hydrocarbons and Carbon Dioxide as Zeotropic Refrigerants

# publisherOf[].label
The Numerical Simulation of a Passive Interdigital Micromixer With Uneven Lamellar Width

# publisherOf[].label
A Review of Manufacturing Process Control

# publisherOf[].label
Reduced Plasma Oncotic Pressure is Indicative of Injury Severity in Trauma Patients

# publisherOf[].label
The effect of implantation orientation of a bileaflet mechanical heart valve on kinematics and hemodynamics in an anatomic aorta.

# publisherOf[].label
ASSESSMENT OF LOW AND HIGH-FIDELITY TURBULENCE MODELS FOR LIQUID METAL FLOW PREDICTIONS

# publisherOf[].label
Partially averaged Navier-Stokes method for turbulence: Fixed point analysis and comparison with unsteady partially averaged Navier-Stokes

# publisherOf[].label
Development of a Non-Blood Contacting Cardiac Assist and Support Device: An In Vivo Proof of Concept Study

# publisherOf[].label
Identification of rotordynamic forces in a flexible rotor system using magnetic bearings

# publisherOf[].label
Automated flow pattern recognition for liquid-liquid flow in horizontal pipes using machine-learning algorithms and weighted majority voting

# publisherOf[].label
Uncertain Technology Evolution and Decision Making in Design

# publisherOf[].label
ON THE THERMOMECHANICAL BEHAVIOR OF NI₆₀TI₄₀ COUPONS VIA HIGH PERFORMANCE FULL FIELD EXPERIMENTS

# publisherOf[].label
Buoyancy effects on heat transfer in five different aspect-ratio rectangular channels with smooth walls and 45-degree ribbed walls

# publisherOf[].label
Film cooling effectiveness distribution on a gas turbine blade platform with inclined slot leakage and discrete film hole flows

# publisherOf[].label
Ambient-temperature regression analysis for estimating retrofit savings in commercial buildings

# publisherOf[].label
A left ventricle model to predict post-revascularization ejection fraction based on cine magnetic resonance images.

# publisherOf[].label
Surface Characterization of Three-Dimensional Printed Fiber-Reinforced Polymer Following an In-Process Mechanical-Chemical Finishing Method

# publisherOf[].label
STATIC AND ROTORDYNAMIC CHARACTERISTICS FOR A NEW HOLE-PATTERN ANNULAR GAS SEAL DESIGN INCORPORATING LARGER DIAMETER HOLES

# publisherOf[].label
DYNAMIC BEHAVIOR OF THE ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE, UHEGT, WITH STATOR INTERNAL COMBUSTION

# publisherOf[].label
An Analytical Poroelastic Model of a Nonhomogeneous Medium Under Creep Compression for Ultrasound Poroelastography Applications-Part I.

# publisherOf[].label
In Search of Effective Design Problems for Design Research

# publisherOf[].label
Experimental Study of Surrogate Particle Transport and Deposition in a Square Channel Using Particle Tracking Technique

# publisherOf[].label
Heat Transfer Characteristics of Conventional and High Efficiency IC Engines Using External or Internal Exhaust Gas Dilution

# publisherOf[].label
Unsteady Simulations for an Advanced-Louver Cooling Scheme

# publisherOf[].label
A Novel Controlled-Motion Test Rig to Evaluate Effect of Synchronous and Subsynchronous Lateral Vibration on Reliability and Performance of Mechanical Seals in Pumps

# publisherOf[].label
An Overview of Shear Deformation Theories and Their Relationships to the Classical Theory

# publisherOf[].label
Simulation of Multi-Liquid-Layer Sloshing With Vessel Motion by Using Moving Particle Simulation

# publisherOf[].label
Identification of force coefficients in a squeeze film damper with a mechanical end seal -: Part 1

# publisherOf[].label
A Phase-Field Damage Model for Orthotropic Materials and Delamination in Composites

# publisherOf[].label
BINDER JETTING ADDITIVE MANUFACTURING OF METALS: A LITERATURE REVIEW

# publisherOf[].label
Nonhomogeneous strain from sparse marker arrays for analysis of transmural myocardial mechanics.

# publisherOf[].label
A New Strain Energy Function Representing the Passive Behavior of the Myocardium.

# publisherOf[].label
Vapor compression cycles: Control-oriented modeling and validation

# publisherOf[].label
SIMULATION-BASED DESIGN OF A SELF-FOLDING SMART MATERIAL SYSTEM

# publisherOf[].label
Pressure Measurements in a Wire-Wrapped 61-Pin Hexagonal Fuel Bundle

# publisherOf[].label
SIMULATION, TEST AND MITIGATION OF 1/2X FORWARD WHIRL FOLLOWING ROTOR DROP ONTO AUXILIARY BEARINGS

# publisherOf[].label
Thermomechanical Characterization and Modeling of Ni60Ti40 SMA for Actuated Chevrons

# publisherOf[].label
Piezoelectric Actuator-Active Vibration Control of the Shaft Line for a Gas Turbine Engine Test Stand

# publisherOf[].label
TRAVELLING WAVE PHENOMENON THROUGH PIEZOELECTRIC ACTUATION OF A FREE-FREE BEAM

# publisherOf[].label
BONE RESPONSE TO EXERCISE DURING RECOVERY BETWEEN UNLOADING BOUTS IN ADULT MALE RATS

# publisherOf[].label
Optically Observed Turbulence In Thrust Collars at Low Critical Reynolds Number Including Numerical Predictions

# publisherOf[].label
Interactive Learning Platform for Turbine Design Using Reduced Order Methods

# publisherOf[].label
Stresses in Proton Exchange Membranes Due to Hygro-Thermal Loading

# publisherOf[].label
DESIGNING SUSTAINABLE MANUFACTURING NETWORKS: THE ROLE OF EXCLUSIVE SPECIES IN ACHIEVING ECOSYSTEM-TYPE CYCLING

# publisherOf[].label
Cellular Chaos: Statistically Self-Similar Structures Based on Chaos Game

# publisherOf[].label
NUMERICAL SIMULATION OF THE MULTISTAGE ULTRA-HIGH EFFICIENCY GAS TURBINE ENGINE, UHEGT

# publisherOf[].label
EFFECT OF TRAILING-EDGE EJECTION ON LOCAL HEAT (MASS) TRANSFER IN PIN FIN COOLING CHANNELS IN TURBINE-BLADES

# publisherOf[].label
Experiments on Effect of Jet Impingement on Heat Transfer in Annular Channels With Parallel and Counter Flows

# publisherOf[].label
COMBUSTION CHARACTERISTICS OF A 2-STROKE LARGE BORE NATURAL GAS SPARK-IGNITED ENGINE

# publisherOf[].label
Toward Intelligent Fault Detection in Turbine Blades: Variational Vibration Models of Damaged Pinned-Pinned Beams

# publisherOf[].label
Evaluating the Directed Intuitive Approach for Bioinspired Design

# publisherOf[].label
Influence of Surface Heating Condition on Local Heat Transfer in Enclosed Corotating Disks With Axial Throughflow

# publisherOf[].label
Identification of structural stiffness and damping coefficients of a shoed brush seal

# publisherOf[].label
A VARIATIONAL APPROACH TO 3-DIMENSIONAL ELASTICITY SOLUTIONS OF LAMINATED COMPOSITE PLATES

# publisherOf[].label
Evaluating the Influence of Charge Motion Control on In-Cylinder Flow using MTV

# publisherOf[].label
DEVELOPMENT AND CHARACTERIZATION OF EMBEDDED SENSORY PARTICLES USING MULTI-SCALE 3D DIGITAL IMAGE CORRELATION

# publisherOf[].label
Energy Harvesting of Piezoelectric Stack Actuator From a Shock Event

# publisherOf[].label
Controlling Backfire Using Changes of the Valve Overlap Period for a Hydrogen-Fueled Engine Using an External Mixture

# publisherOf[].label
Modeling an Evaporative Cooling System to Improve Gas Turbines Performance

# publisherOf[].label
Numerical Investigation Into the Keying Process of a Plate Anchor Vertically Installed in Cohesionless Soil

# publisherOf[].label
Heat Transfer in a Rotating, Two-Pass, Variable Aspect Ratio Cooling Channel With Profiled V-Shaped Ribs

# publisherOf[].label
ELASTIC/PLASTIC OBLIQUE IMPACT ANALYSIS FOR HEAD DISK INTERFACE OPERATIONAL SHOCK

# publisherOf[].label
Automotive Transmission Clutch Fill Control Using a Customized Dynamic Programming Method

# publisherOf[].label
Molten Salt Reactor With Simplified Fuel Recycling and Delayed Carrier Salt Cleaning

# publisherOf[].label
A CORRELATION BETWEEN THERMAL EFFICIENCY AND BIOLOGICAL NETWORK CYCLICITY

# publisherOf[].label
INCORPORATING THE OPTION VALUE OF PRODUCT FAMILY VARIANTS IN MATERIAL AND PROCESS SELECTION

# publisherOf[].label
The Influence of Internal Damping on the Rotordynamic Stability of a Flywheel Rotor With Flexible Hub

# publisherOf[].label
DESIGN OF A PERIODIC EVENT-BASED REPETITIVE CONTROLLER WITH DYNAMIC OUTPUT FEEDBACK FOR LINEAR SYSTEMS

# publisherOf[].label
SPECTRAL ANALYSIS AND CHARACTERIZATION OF A MEMBRANE-BASED ARTIFICIAL HAIR CELL SENSOR

# publisherOf[].label
Thermodynamic Theory and Experimental Validation of a Multiphase Isochoric Freezing Process.

# publisherOf[].label
Synthesizing Robust Communication Networks for Unmanned Aerial Vehicles With Resource Constraints

# publisherOf[].label
STUDY OF HIGH TEMPERATURE NANOFLUIDS USING CARBON NANOTUBES (CNT) FOR SOLAR THERMAL STORAGE APPLICATIONS

# publisherOf[].label
Effects of Streamwise Distance and Density Ratio on Film-Cooling Effectiveness for Double-Jet Film-Cooling on a Flat Plate

# publisherOf[].label
Evaluating Designer Learning and Performance in Interactive Deep Generative Design

# publisherOf[].label
Investigation of Multiphase Flow Leak Detection in Pipeline Using Time Series Analysis Technique

# publisherOf[].label
Laminar Flame Speed and Ignition Delay Time Data for the Kinetic Modeling of Hydrogen and Syngas Fuel Blends

# publisherOf[].label
A Knowledge Repository for Behavioral Models in Engineering Design

# publisherOf[].label
Prediction of Ductile Fracture Surface Roughness Scaling

# publisherOf[].label
INFLUENCE OF SURFACE HEATING CONDITION ON LOCAL HEAT-TRANSFER IN A ROTATING SQUARE CHANNEL WITH SMOOTH WALLS AND RADIAL OUTWARD FLOW

# publisherOf[].label
A TAILORED NONLINEAR SLAT-COVE FILLER FOR AIRFRAME NOISE REDUCTION

# publisherOf[].label
A DESIGN METHOD FOR DEVELOPING A UNIVERSAL PRODUCT FAMILY IN A DYNAMIC MARKET ENVIRONMENT

# publisherOf[].label
Eddy Current Effects on the Design of Rotor-Magnetic Bearing Systems

# publisherOf[].label
Internal cooling near trailing edge of a gas turbine airfoil with cooling airflow through blockages with holes

# publisherOf[].label
Thoria-Based Cermet Nuclear Fuel: Neutronics Fuel Design and Fuel Cycle Analysis

# publisherOf[].label
Ignition and Flame Speed Kinetics of Two Natural Gas Blends With High Levels of Heavier Hydrocarbons

# publisherOf[].label
AN ANALYSIS OF THERMO-MECHANICAL BEHAVIOR IN A MULTILAYER COMPOSITE PIPE UNDER TEMPERATURE VARIATION

# publisherOf[].label
The Transient Effect of Tendon Disconnection on the Global Motion of ETLP

# publisherOf[].label
Non-Intrusive Experimental Investigation of Flow Behavior Inside a 5X5 Rod Bundle with Spacer Grids using PIV and MIR

# publisherOf[].label
Radial Heat Transfer Dynamics During Cryogen Spray Cooling

# publisherOf[].label
Predictive Modeling for Rollover Warning of Heavy Vehicles

# publisherOf[].label
Unsteady Wake Effects on Boundary Layer Transition and Heat Transfer Characteristics of a Turbine Blade

# publisherOf[].label
Tribological Behavior of Oil-Lubricated Laser Textured Surfaces in Conformal Flat and Point Contacts

# publisherOf[].label
Identification of structural stiffness and damping coefficients of a shoed-brush seal

# publisherOf[].label
Discussion: The Lomakin Effect in Annular Gas Seals Under Choked Flow Conditions (Arghir, M., Defaye, C., and Frne, F., 2007, ASME J. Eng. Gas Turbines Power, 129, pp. 10281034)

# publisherOf[].label
Analysis of Degenerate Bifurcation in Machining Using a Nonlinear Model

# publisherOf[].label
Experimental characterization of nonlinear dynamics underlying the cylindrical grinding process

# publisherOf[].label
Fracture Behavior of Pressurized Defective Pipes Subjected to Large Tensile Strains

# publisherOf[].label
Stretch-Induced Stress Fiber Remodeling and MAPK Activations Depend on Mechanical Strain Rate

# publisherOf[].label
ANALYTICAL MODEL TO PREDICT NONHOMOGENEOUS SOIL-TEMPERATURE VARIATION

# publisherOf[].label
Vibration Amplitude in Rotary Ultrasonic Machining: A Novel Measurement Method and Effects of Process Variables

# publisherOf[].label
Buckling of Circular Plates Based on Reddy Plate Theory

# publisherOf[].label
On Void Coalescence Under Combined Tension and Shear

# publisherOf[].label
On the Role of Damage Mechanics in Life Prediction of Composite Structures

# publisherOf[].label
Stress distributions during fiber pull-out

# publisherOf[].label
LAMINAR FLAME SPEED MEASUREMENTS OF SYNTHETIC GAS BLENDS WITH HYDROCARBON IMPURITIES

# publisherOf[].label
Risk-Informed and Defense-in-Depth Oriented Plant Design Approach

# publisherOf[].label
Heat-induced changes in the finite strain viscoelastic behavioir of a collaagenous tissue.

# publisherOf[].label
Experimental Analysis of Salt Hydrate Latent Heat Thermal Energy Storage System With Porous Aluminum Fabric and Salt Hydrate as Phase Change Material With Enhanced Stability and Supercooling

# publisherOf[].label
Generation and Enforcement of Process-Driven Manufacturability Constraints: A Survey of Methods and Perspectives for Product Design

# publisherOf[].label
Study of Cubic Splines and Fourier Series as Interpolation Techniques for Filling in Short Periods of Missing Building Energy Use and Weather Data

# publisherOf[].label
Exploring Effective Methods for Simulating Damaged Structures With Geometric Variation: Toward Intelligent Failure Detection

# publisherOf[].label
Colocation: Design Constraints for Distributed and Discrete Transducers

# publisherOf[].label
Experimental Study of the Static and Dynamic Characteristics of a Long Smooth Seal With Two-Phase, Mainly Air Mixtures

# publisherOf[].label
Active Aerodynamic Control of Multi-Stage Axial Compressor Instability and Surge by Dynamically Adjusting the Stator Blades

# publisherOf[].label
Solid Element Rotordynamic Modeling of a Rotor on a Flexible Support Structure Utilizing Multiple-Input and Multiple-Output Support Transfer Functions

# publisherOf[].label
Rotordynamic Characteristics of a Flexure Pivot Pad Bearing With an Active and Locked Integral Squeeze Film Damper

# publisherOf[].label
Heat Transfer, Pressure Drop, and Mass Flow Rate in Pin Fin Channels With Long and Short Trailing Edge Ejection Holes

# publisherOf[].label
Heat transfer between blockages with holes in a rectangular channel

# publisherOf[].label
EFFECT OF INLET GEOMETRY ON FLAT PLATE, FILM COOLING EFFECTIVENESS FROM SHAPED HOLES

# publisherOf[].label
Experimental Observations on the Dynamic Response of Phase Change Materials

# publisherOf[].label
Experimental Analysis of Microchannel Entrance Length Characteristics Using Microparticle Image Velocimetry

# publisherOf[].label
A NEW NONLINEAR HIGHER-ORDER SHEAR DEFORMATION THEORY FOR NONLINEAR VIBRATIONS OF LAMINATED SHELLS

# publisherOf[].label
COMPUTATIONAL INVESTIGATION OF JET IMPINGEMENT ON TURBINE BLADE LEADING EDGE COOLING WITH ENGINE-LIKE TEMPERATURES

# publisherOf[].label
EXPERIMENTAL VERSUS THEORETICAL CHARACTERISTICS OF A HIGH-SPEED HYBRID (COMBINATION HYDROSTATIC AND HYDRODYNAMIC) BEARING

# publisherOf[].label
PREDICTED ROTORDYNAMIC BEHAVIOR OF A LABYRINTH SEAL AS ROTOR SURFACE SPEED APPROACHES MACH 1

# publisherOf[].label
Preswirl and Mixed-Flow (Mainly Liquid) Effects on Rotordynamic Performance of a Long (L/D=0.75) Smooth Seal

# publisherOf[].label
FORMALIZING USER ACTIVITY - PRODUCT FUNCTION ASSOCIATION BASED DESIGN RULES FOR UNIVERSAL PRODUCTS

# publisherOf[].label
DEVELOPMENT AND EXPERIMENTAL DEMONSTRATION OF A SHAPE MEMORY ALLOY-BASED ADAPTIVE TWO-PHASE RADIATOR FOR SPACE APPLICATIONS

# publisherOf[].label
Special Issue: Well-Being in the Built Environment

# publisherOf[].label
Optimization of a Parametric FLNG in Finite Water Depth

# publisherOf[].label
Three-Dimensional Numerical Simulations of Flows Past Smooth and Rough/Bare and Helically Straked Circular Cylinders Allowed to Undergo Two Degree-of-Freedom Motions

# publisherOf[].label
SUBSEA PRODUCTION TWO-PHASE FLOW MODELING AND CONTROL OF PIPELINE AND MANIFOLD ASSEMBLIES

# publisherOf[].label
Analysis of squeeze film dampers operating with bubbly lubricants

# publisherOf[].label
Evaluation of Additively Manufactured Heat Exchanger Tubes Using Experimental and Conjugate Heat Transfer Analysis

# publisherOf[].label
Influence of Hole Inlet Geometry on the Film Cooling Effectiveness from Shaped Film Cooling Holes

# publisherOf[].label
Applicability of Common RANS Models for the Calculation of Transient Forced to Natural Convection