# overview
-- Advanced material and manufacturing.

-- Micromanufacturing: traditional and non-traditional techniques.

-- Additive manufacturing of metals: microstructure of material, post processing and reliability.

# keywords[]
5102 Atomic, Molecular And Optical Physics

# keywords[]
4009 Electronics, Sensors And Digital Hardware

# keywords[]
5102 Atomic, Molecular And Optical Physics

# keywords[]
4009 Electronics, Sensors And Digital Hardware

# keywords[]
5102 Atomic, Molecular And Optical Physics

# keywords[]
4009 Electronics, Sensors And Digital Hardware

# keywords[]
3403 Macromolecular And Materials Chemistry

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4007 Control Engineering, Mechatronics And Robotics

# keywords[]
3403 Macromolecular And Materials Chemistry

# educationAndTraining[].organization.label
University of Michigan-Ann Arbor - (Ann Arbor, Michigan, United States)

# educationAndTraining[].organization.label
University of California, Berkeley - (Berkeley, California, United States)

# educationAndTraining[].organization.label
University of Michigan-Ann Arbor - (Ann Arbor, Michigan, United States)

# publications[].label
Abrasive and non-conventional post-processing techniques to improve surface finish of additively manufactured metals: a review

# publications[].label
TEACHING MANUFACTURING WITH GROUP CELL PRACTICES

# publications[].publisher
American Society for Engineering Education

# publications[].label
Novel Fatigue Testing of Extruded Inconel 718

# publications[].label
Flushing Enhancement with Vibration and Pulsed Current in Electrochemical Machining

# publications[].label
Influence of Drilling Parameters by EDM on the HSLA Steel Microstructure

# publications[].label
Characterization and Performance of Minimum Quantity Lubricants in Through-Tool Drilling

# publications[].publisher
SPIE, the international society for optics and photonics

# publications[].label
Computer Simulation of Low Frequency Vibration in Electrochemical Machining

# publications[].label
TURNING DYNAMICS PART 1: EXPERIMENTAL ANALYSIS

# publications[].publisher
SPIE, the international society for optics and photonics

# publications[].publisher
American Society for Engineering Education

# publications[].label
Inspection Path planning of Free Form Surfaces Using Virtual Machining

# publications[].label
CHARACTERIZATION OF MICROMIST FOR EFFECTIVE MACHINING

# publications[].label
Tool wear, surface integrity and spheroidal chip analysis in micromilling of AISI H13 fabricated by additive manufacturing

# publications[].label
Experimental Study of Micromilling of H13 Tool Steel Manufactured by Directed Energy Deposition

# publications[].label
Surface Finish of Ball-End Milled Microchannels

# publications[].label
Electrochemical polishing of selective laser melted Inconel 718

# publications[].label
Post-Processing of Additively Manufactured Metal Parts

# publications[].label
Micromilling H13 Tool Steel and Tool Life Criteria for Coated Microtools

# publications[].label
A novel Infrared Proximity Array sensor for 3D visual sensing: Modeling and applications

# publications[].label
Micromachining Education And Research At Texas A&M University

# publications[].publisher
American Society for Engineering Education

# publications[].label
Wear of TiAlN and DLC coated microtools in micromilling of Ti-6Al-4V alloy

# publications[].label
Effects of Applied Potential on Friction of a PVDF Micro Gripper

# publications[].label
Electron-Beam Welding of Laser Powder-Bed-Fused Inconel 718

# publications[].label
Prediction of Burr Formation in Fabricating MEMS Components by Micro End Milling

# publications[].label
Cutting Tools for Metal Matrix Composites

# publications[].label
Pulsed Power Supply for Electrochemical Machining

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Method and apparatus for performing targeted polishing via manipulation of magnetic-abrasive fluid

# publications[].label
MICROMILLING IN MINIMUM QUANTITY LUBRICATION

# publications[].label
Electron Beam Welding of Rolled and Laser Powder Bed Fused Inconel 718

# publications[].label
Method and apparatus for performing targeted polishing via manipulation of magnetic-abrasive fluid

# publications[].label
Postprocessing of Additively Manufactured Metal Parts

# publications[].label
Effects of print parameters and heat treatment on fatigue of laser powder bed fused Inconel 718

# publications[].publisher
SPIE, the international society for optics and photonics

# publications[].label
Novel Fatigue Tester for Additively Manufactured Metals

# publications[].label
Electron beam welding of rolled and laser powder bed fused Inconel 718

# publications[].label
Material Removal Rate of Zirconia in Electro Discharge Micromachining

# publications[].label
Suppressing Aluminum Carbide in Welding Aluminum Silicon Carbide Composite

# publications[].label
Testing Techniques and Fatigue of Additively Manufactured Inconel 718  A Review

# publications[].label
JOINING OF ADVANCED ALUMINUM-GRAPHITE COMPOSITE

# publications[].label
TURNING DYNAMICS PART 2: STABILITY AT HIGH SPEED

# publications[].label
Laser and resistance joining of aluminum-graphite composite

# publications[].label
Prediction of Material Removal Rate in Die-Sinking Electrical Discharge Machining

# publications[].label
Effect of Cutting Fluid on Micromilling of Ti-6Al-4V Titanium Alloy

# publications[].label
Effects of applied potential on friction of a piezoelectric material

# publications[].label
Quality enhancement with ultrasonic wave and pulsed current in electrochemical machining

# publications[].label
Experimental study of micromilling selective laser melted Inconel 718 superalloy

# publications[].label
Electrothermal energy distribution model for EDM drilling of HSLA steels

# publications[].label
Experimental Investigation of Different Tool Geometries when Micromilling H13 Tool Steel

# publications[].label
Experimental investigation of porosity distribution in selective laser melted Inconel 718

# publications[].label
Ultra-Precision Machining Process Dynamics and Surface Quality Monitoring

# publications[].label
MULTIPHASE FLOW DISTRIBUTION IN MQL DRILLING USING OPTICAL INTENSITY DISTRIBUTION BASED APPROACH

# publications[].label
Manufacturing education and research at Texas A&M University: Responding to global trends

# publications[].label
Through-tool minimum quantity lubrication and effect on machinability

# publications[].label
Manufacturing engineering education in Singapore

# publications[].label
Electrochemical Polishing of Extruded and Laser Powder-Bed-Fused Inconel 718

# publications[].label
A Novel Infrared Proximity Array Sensor for 3D Visual Sensing: Modeling and Applications

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Characterization of Hip Implant Surfaces

# publications[].label
GAS BEARING TECHNOLOGY FOR OIL-FREE MICROTURBOMACHINERY - RESEARCH EXPERIENCE FOR UNDERGRADUATE (REU) PROGRAM AT TEXAS A&M UNIVERSITY

# publications[].label
Built-up-edge effects on surface deterioration in micromilling processes

# publications[].label
Joining of advanced aluminum-graphite composite

# publications[].label
USE OF CONTOUR METHOD FOR WELDING RESIDUAL STRESS ASSESSMENT

# publications[].label
Effect of Channel Roughness on Micro-Droplet Distribution in Internal Minimum Quantity Lubrication

# publications[].label
Micro-machining of additively manufactured metals: a review

# publications[].label
Teaching Manufacturing With Group Cell Practices

# publications[].publisher
American Society for Engineering Education

# researcherOn[].label
RET Site: Enhancing Teacher Knowledge & Skills in Modern Manufacturing

# researcherOn[].awardedBy.label
National Science Foundation - (Arlington, Virginia, United States)

# researcherOn[].label
GOALI: Understanding Mist Flow Dynamics in Through-tool Minimum Quantity Lubrication Drilling

# researcherOn[].awardedBy.label
National Science Foundation - (Arlington, Virginia, United States)

# streetAddress
Texas A&M University; Engineering Technology; 3367 TAMU

# etdChairOf[].label
Jain, Srishti (2018-12). Electrochemical Polishing of Selective Laser Melted Inconel 718. Master's Thesis.

# etdChairOf[].label
Berestovskyi, Dmytro V (2013-08). Surface Finish Modeling in Micromilling of Biocompatible Materials. Master's Thesis.

# etdChairOf[].label
Patel, Vivek R. (2021-04). Electron Beam Welding of Rolled Inconel 718. Master's Thesis.

# etdChairOf[].label
Khan, Waleed Ashraf (2018-05). Through-Tool Minimum Quantity Lubrication and Effect on Machinability of Inconel 718. Master's Thesis.

# etdChairOf[].label
Agnihotri, Mukul Mukund (2007-04). Development of a novel orthopedic microfastener. Master's Thesis.

# etdChairOf[].label
Chittipolu, Sujeev (2010-07). FAILURE PREDICTION AND STRESS ANALYSIS OF MICROCUTTING TOOLS. Master's Thesis.

# etdChairOf[].label
Shi, Lang (2018-05). Use of Contour Method for Assessment of Residual Stress in Submerged Arc Welding of A36 Steel. Master's Thesis.

# etdChairOf[].label
Srinivas Sundarram, Sriharsha (2008-10). Development of Electrochemical Micro Machining. Master's Thesis.

# etdChairOf[].label
Ozkeskin, Fatih Mert (2008-08). Feedback Controlled High Frequency Electrochemical Micromachining. Master's Thesis.