# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4009 Electronics, Sensors And Digital Hardware

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# educationAndTraining[].organization.label
The University of Texas at Austin - (Austin, Texas, United States)

# educationAndTraining[].organization.label
Oklahoma State University - (Stillwater, Oklahoma, United States)

# educationAndTraining[].organization.label
Oklahoma State University - (Stillwater, Oklahoma, United States)

# publications[].label
Theory versus experiment for the rotordynamic impedances of two hole-pattern-stator gas annular seals

# publications[].label
SEAL-ROTORDYNAMIC-COEFFICIENT TEST-RESULTS FOR A MODEL SSME ATD-HPFTP TURBINE INTERSTAGE SEAL WITH AND WITHOUT A SWIRL BRAKE

# publications[].label
Tilting Pad Journal Bearings-A Discussion on Stability Calculation, Frequency Dependence, and Pad and Pivot

# publications[].label
Static and Dynamic Characteristics for a Pressure-Dam Bearing

# publications[].label
Experimental versus theoretical characteristics of a high-speed hybrid (combination hydrostatic and hydrodynamic) bearing

# publications[].label
Rotordynamic coefficients measurements versus predictions for a high-speed flexure-pivot tilting-pad bearing (load-between-pad configuration)

# publications[].label
CONVERGENT-TAPERED ANNULAR SEALS: ANALYSIS AND TESTING FOR ROTORDYNAMIC COEFFICIENTS.

# publications[].label
Test results for sawtooth-pattern damper seals: leakage and rotordynamic coefficients.

# publications[].label
Theory versus experiment for the rotordynamic characteristics of a high pressure honeycomb annular gas seal at eccentric positions

# publications[].label
Annular seals for non-contact sealing of fluids in turbomachinery

# publications[].label
Measurements Versus Predictions for the Rotordynamic Characteristics of a Five-Pad Rocker-Pivot Tilting-Pad Bearing in Load-Between-Pad Configuration

# publications[].label
Theory versus experiment for leakage and rotordynamic coefficients of circumferentially-grooved liquid annular seals with L/D of 0.45

# publications[].label
Annular honeycomb seals: Test results for leakage and rotordynamic coefficients; comparisons to labyrinth and smooth configurations

# publications[].label
Improving Tilting Pad Journal Bearing Predictions-Part I: Model Development and Impact of Rotor Excited Versus Bearing Excited Impedance Coefficients

# publications[].label
ROTORDYNAMIC COEFFICIENT AND LEAKAGE TEST RESULTS FOR INTERLOCK AND TOOTH-ON-STATOR LABYRINTH SEALS.

# publications[].label
Vibration Modeling and Experimental Results of Two-Phase Twin-Screw Pump

# publications[].label
A Study on the Leakage and Rotordynamic Coefficients of a Long-Smooth Seal With Laminar-Two-Phase, Mainly-Oil Mixtures

# publications[].label
Evaluation of near-wall turbulence models for liquid annular seals with roughened walls

# publications[].label
Rotordynamic coefficients for a tooth-on-stator labyrinth seal at 70 bar supply pressures: Measurements versus theory and comparisons to a hole-pattern stator seal

# publications[].label
TESTING OF TURBULENT SEALS FOR ROTORDYNAMIC COEFFICIENTS.

# publications[].label
COMPARISON OF A LIQUID ANNULAR SEAL FOR PUMP APPLICATIONS WITH AND WITHOUT A SWIRL BRAKE

# publications[].label
Residual-Flexibility Corrections for Transient Modal Rotordynamic Models

# publications[].label
AN IWATSUBO-BASED SOLUTION FOR LABYRINTH SEALS - COMPARISON TO EXPERIMENTAL RESULTS

# publications[].label
VIBRATION CHARACTERISTICS OF THE HPOTP (HIGH PRESSURE OXYGEN TURBOPUMP) OF THE SSME (SPACE SHUTTLE MAIN ENGINE).

# publications[].label
The multiple contributions of Jorgen Lund's Ph.D. dissertation, "self-excited, stationary whirl orbits of a journal in sleeve bearings," RPI, 1966, engineering mechanics

# publications[].label
System and method for measuring dynamic loads in a magnetic bearing

# publications[].label
IMPROVING TILTING-PAD JOURNAL BEARING PREDICTIONS: PART II - COMPARISON OF MEASURED AND PREDICTED ROTOR-PAD TRANSFER FUNCTIONS FOR A ROCKER-PIVOT TILTING-PAD JOURNAL BEARING

# publications[].label
Angled InjectionHydrostatic Bearings Analysis and Comparison to Test Results

# publications[].label
Measured Comparison of Leakage and Rotordynamic Characteristics for a Slanted-Tooth and a Straight-Tooth Labyrinth Seal

# publications[].label
ESTIMATION OF SEAL BEARING STIFFNESS AND DAMPING PARAMETERS FROM EXPERIMENTAL DATA.

# publications[].label
VIBRATION CHARACTERISTICS OF THE HPOTP (HIGH-PRESSURE OXYGEN TURBOPUMP) OF THE SSME (SPACE SHUTTLE MAIN ENGINE).

# publications[].label
Experimental rotordynamic coefficient results for a load-on-pad flexible-pivot tilting-pad bearing with comparisons to predictions from bulk-flow and reynolds equation models

# publications[].label
An iwatsubo-based solution for labyrinth seals - comparison with experimental results.

# publications[].label
Vibration Modeling and Experimental Results of Two Phase Flow Twin-Screw Pump

# publications[].label
Test Results for Turbulent Annular Seals, Using Smooth Rotors and Helically Grooved Stators

# publications[].label
THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC CHARACTERISTICS OF A SMOOTH ANNULAR GAS SEAL AT ECCENTRIC POSITIONS

# publications[].label
EXPERIMENTAL ROTORDYNAMIC COEFFICIENT RESULTS FOR TEETH-ON-ROTOR AND TEETH-ON-STATOR LABYRINTH GAS SEALS

# publications[].label
Rotordynamic coefficients for a tooth-on-stator labyrinth seal at 70 bar supply pressures -measurements versus theory and comparisons to a hole-pattern stator seal

# publications[].label
Annular Honeycomb Seals: Test Results for Leakage and Rotordynamic Coefficients; Comparisons to Labyrinth and Smooth Configurations

# publications[].label
ROTORDYNAMIC CHARACTERISTICS OF A 5 PAD, ROCKER-PIVOT, TILTING PAD BEARING IN A LOAD-ON-PAD CONFIGURATION; COMPARISONS TO PREDICTIONS AND LOAD-BETWEEN-PAD RESULTS

# publications[].label
JOURNAL BEARING IMPEDANCE DESCRIPTIONS FOR ROTORDYNAMIC APPLICATIONS.

# publications[].label
MODAL TRANSIENT ROTORDYNAMIC MODEL FOR DUAL-ROTOR JET ENGINE SYSTEMS.

# publications[].label
Test results for liquid `damper' seals using a round-hole roughness pattern for the stators

# publications[].label
MEASURED COMPARISON OF LEAKAGE AND ROTORDYNAMIC CHARACTERISTICS FOR A SLANTED-TOOTH AND A STRAIGHT-TOOTH LABYRINTH SEAL

# publications[].label
FINITE-LENGTH SOLUTIONS FOR ROTORDYNAMIC COEFFICIENTS OF TURBULENT ANNULAR SEALS

# publications[].label
Pressure oscillation in the leakage annulus between a shrouded impeller and its housing due to impeller-discharge-pressure disturbances

# publications[].label
VIBRATION MODELING AND EXPERIMENTAL RESULTS OF TWO PHASE TWIN-SCREW PUMP

# publications[].label
Friction Factor Behavior From Flat-Plate Tests of Smooth and Hole-Pattern Roughened Surfaces With Supply Pressures up to 84 bars

# publications[].label
Evaluation of near-wall turbulence models for deliberately roughened liquid annular seals

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
ANALYSIS AND TESTING FOR ROTORDYNAMIC COEFFICIENTS OF TURBULENT ANNULAR SEALS WITH DIFFERENT, DIRECTIONALLY HOMOGENEOUS SURFACE-ROUGHNESS TREATMENT FOR ROTOR AND STATOR ELEMENTS.

# publications[].label
TEST-RESULTS FOR ROUND-HOLE-PATTERN DAMPER SEALS - OPTIMUM CONFIGURATIONS AND DIMENSIONS FOR MAXIMUM NET DAMPING

# publications[].label
Prediction of dry-friction whirl and whip between a rotor and a stator

# publications[].label
Rotordynamic Stability Predictions for Centrifugal Compressors Using a Bulk-Flow Model to Predict Impeller Shroud Force and Moment Coefficients

# publications[].label
DYNAMIC FORCE PERFORMANCE OF ANNULAR GAS SEALS AT OFF-CENTER CONDITIONS

# publications[].label
Testing of turbulent seals for rotordynamic coefficients.

# publications[].label
Rotordynamic Characteristics of a Five Pad, Rocker-Pivot, Tilting Pad Bearing in a Load-on-Pad Configuration; Comparisons to Predictions and Load-Between-Pad Results

# publications[].label
TURBULENT-FLOW HYDROSTATIC BEARINGS - ANALYSIS AND EXPERIMENTAL RESULTS

# publications[].label
Influence of impeller shroud forces on turbopump rotor dynamics

# publications[].label
Rotordynamic Stability Predictions for Centrifugal Compressors Using a Bulk-Flow Model to Predict Impeller Shroud Force and Moment Coefficients

# publications[].label
ANALYSIS AND TESTING FOR ROTORDYNAMIC COEFFICIENTS OF TURBULENT ANNULAR SEALS WITH DIFFERENT, DIRECTIONALLY-HOMOGENEOUS SURFACE-ROUGHNESS TREATMENT FOR ROTOR AND STATOR ELEMENTS.

# publications[].label
IMPORTANCE OF HEAT-TRANSFER FROM FLUID FILM TO STATOR IN TURBULENT-FLOW ANNULAR SEALS

# publications[].label
A design to increase the static stiffness of hole pattern stator gas seals

# publications[].label
PREDICTED ROTORDYNAMIC BEHAVIOR OF A LABYRINTH SEAL AS ROTOR SURFACE SPEED APPROACHES MACH 1

# publications[].label
Friction-factor data for flat-plate tests of smooth and honeycomb surfaces

# publications[].label
Twice-running-speed response due to elliptical bearing clearances

# publications[].label
ANALYSIS FOR ROTORDYNAMIC COEFFICIENTS OF HELICALLY-GROOVED TURBULENT ANNULAR SEALS

# publications[].label
AN ANNULAR GAS SEAL ANALYSIS USING EMPIRICAL ENTRANCE AND EXIT REGION FRICTION FACTORS

# publications[].label
Test results for liquid "damper" seals using a round-hole roughness pattern for the stators

# publications[].label
A Study for Rotordynamic and Leakage Characteristics of a Long-Honeycomb Seal With Two-Phase, Mainly Air Mixtures

# publications[].label
Two Jeffcott-Based Modal Simulation Models for Flexible Rotating Equipment

# publications[].label
Analysis for rotordynamic coefficients of helically-grooved turbulent annular seals.

# publications[].label
Dynamic analysis of turbulent annular seals based on Hirs' lubrication equation.

# publications[].label
MEASURED STATIC AND ROTORDYNAMIC COEFFICIENT RESULTS FOR A ROCKER-PIVOT, TILTING-PAD BEARING WITH 50 AND 60% OFFSETS

# publications[].label
A Study on the Leakage and Rotordynamic Performance of a Long Labyrinth Seal Under Mainly Air Conditions

# publications[].label
Understanding friction factor behavior in liquid annular seals with deliberately roughened surfaces

# publications[].label
Testing of turbulent seals for rotor dynamic coefficients.

# publications[].label
Theoretical and experimental comparisons for rotordynamic coefficients of a high-speed, high-pressure, orifice-compensated hybrid bearing

# publications[].label
Measured Static and Rotordynamic Characteristics of a Smooth-Stator/Grooved-Rotor Liquid Annular Seal

# publications[].label
ROTOR-FIXED MODAL SIMULATION MODEL FOR FLEXIBLE ROTATING EQUIPMENT.

# publications[].label
Comparison of experimental rotordynamic coefficients and leakage characteristics between hole-pattern gas damper seals and a honeycomb seal

# publications[].label
A ROTOR-FIXED MODAL SIMULATION MODEL FOR FLEXIBLE ROTATING EQUIPMENT

# publications[].label
MODAL TRANSIENT SIMULATION MODEL FOR FLEXIBLE ASYMMETRIC ROTORS.

# publications[].label
An Experimental Study of the Load-Orientation Sensitivity of Three-Lobe Bearings

# publications[].label
The impact of real gas properties on predictions of static and rotordynamic properties of the annular gas seals for injection compressors

# publications[].label
FRACTIONAL-FREQUENCY ROTOR MOTION DUE TO NONSYMMETRIC CLEARANCE EFFECTS.

# publications[].label
Theory versus experiment for the rotordynamic characteristics of a smooth annular gas seal at eccentric positions

# publications[].label
Identification of Rotordynamic Forces in a Flexible Rotor System Using Magnetic Bearings

# publications[].label
Rub-Induced Parametric Excitation in Rotors

# publications[].label
STATIC AND ROTORDYNAMIC CHARACTERISTICS FOR A NEW HOLE-PATTERN ANNULAR GAS SEAL DESIGN INCORPORATING LARGER DIAMETER HOLES

# publications[].label
A design to improve the effective damping characteristics of hole-pattern-stator annular gas seals

# publications[].label
Rotordynamic Performance of a Negative-Swirl Brake for a Tooth-on-Stator Labyrinth Seal

# publications[].label
Dynamic characteristics of the diverging taper honeycomb-stator seal

# publications[].label
A note on Kellenberger's model for spiral vibrations

# publications[].label
FRICTION FACTOR BEHAVIOR FROM FLAT-PLATE TESTS OF 12.15 mm DIAMETER HOLE-PATTERN ROUGHENED SURFACES

# publications[].label
Experimental Results for Labyrinth Gas Seals With Honeycomb Stators: Comparisons to Smooth-Stator Seals and Theoretical Predictions

# publications[].label
Theory versus experiment for the rotordynamic coefficients of an interlocking labyrinth gas seal

# publications[].label
MEASUREMENTS VERSUS PREDICTIONS FOR THE STATIC AND DYNAMIC CHARACTERISTICS OF A FOUR-PAD, ROCKER-PIVOT, TILTING-PAD JOURNAL BEARING

# publications[].label
Rotordynamic Coefficients Measurements Versus Predictions for a High Speed Flexure-Pivot Tilting-Pad Bearing (Load-Between-Pad Configuration)

# publications[].label
Twice-running-speed response due to elliptical bearing clearances

# publications[].label
THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC COEFFICIENTS OF ANNULAR GAS SEALS .2. CONSTANT-CLEARANCE AND CONVERGENT-TAPERED GEOMETRY

# publications[].label
FRICTION-FACTOR CHARACTERISTICS FOR NARROW CHANNELS WITH HONEYCOMB SURFACES

# publications[].label
Rotordynamic evaluation of a roughened-land hybrid bearing

# publications[].label
PRESSURE OSCILLATION IN THE LEAKAGE ANNULUS BETWEEN A SHROUDED IMPELLER AND ITS HOUSING DUE TO IMPELLER-DISCHARGE-PRESSURE DISTURBANCES

# publications[].label
EXPERIMENTAL TEST-RESULTS FOR 4 HIGH-SPEED, HIGH-PRESSURE, ORIFICE-COMPENSATED HYBRID BEARINGS

# publications[].label
Entrance region friction factor model applied to annular seal analysis: Theory versus experiment for smooth and honeycomb seals

# publications[].label
AN ENTRANCE REGION FRICTION FACTOR MODEL APPLIED TO ANNULAR SEAL ANALYSIS - THEORY VERSUS EXPERIMENT FOR SMOOTH AND HONEYCOMB SEALS

# publications[].label
New Steps to Improve Rotordynamic Stability Predictions of Centrifugal Compressors

# publications[].label
TILTING PAD JOURNAL BEARINGS - A DISCUSSION ON STABILITY CALCULATION, FREQUENCY DEPENDENCE, AND PAD AND PIVOT FLEXIBILITY

# publications[].label
Testing of turbulent seals for rotordynamic coefficients.

# publications[].label
TEST RESULTS FOR SAWTOOTH-PATTERN DAMPER SEALS: LEAKAGE AND ROTORDYNAMIC COEFFICIENTS.

# publications[].label
Finite-length solutions for rotodynamic coefficients of turbulent annular seals.

# publications[].label
Experimental Study of the Static and Dynamic Characteristics of a Long Smooth Seal With Two-Phase, Mainly Air Mixtures

# publications[].label
VIBRATION CHARACTERISTICS OF THE HPOTP (HIGH-PRESSURE OXYGEN TURBOPUMP) OF THE SSME (SPACE-SHUTTLE MAIN ENGINE)

# publications[].label
Convergent-tapered annular seals: analysis and testing for rotordynamic coefficients.

# publications[].label
TESTING OF TURBULENT SEALS FOR ROTOR DYNAMIC COEFFICIENTS.

# publications[].label
Estimation of seal bearing stiffness and damping parameters from experimental data.

# publications[].label
An extended three-control-volume theory for circumferentially-grooved liquid seals

# publications[].label
Thermal effects in liquid oxygen hydrostatic journal bearings

# publications[].label
DYNAMIC ANALYSIS OF TURBULENT ANNULAR SEALS BASED ON HIRS LUBRICATION EQUATION

# publications[].label
A Comparison of Experimental Rotordynamic Coefficients and Leakage Characteristics Between Hole-Pattern Gas Damper Seals and a Honeycomb Seal

# publications[].label
Rotordynamic-coefficients and static (equilibrium loci and leakage) characteristics laminar-flow for annular seals

# publications[].label
CENTRIFUGAL-ACCELERATION MODES FOR INCOMPRESSIBLE FLUID IN THE LEAKAGE ANNULUS BETWEEN A SHROUDED PUMP IMPELLER AND ITS HOUSING

# publications[].label
DYNAMIC ANALYSIS OF TURBULENT ANNULAR SEALS BASED ON HIRS LUBRICATION EQUATION.

# publications[].label
EXPERIMENTAL ROTORDYNAMIC COEFFICIENT RESULTS FOR TEETH-ON-ROTOR AND TEETH-ON-STATOR LABYRINTH GAS SEALS.

# publications[].label
A comparison of rotordynamic-coefficient predictions for annular honeycomb gas seals using three different friction-factor models

# publications[].label
Dynamic analysis of turbulent annular seals based on Hirs' lubrication equation.

# publications[].label
The Effects of Converging and Diverging Axial Taper on the Rotordynamic Coefficients of Liquid Annular Pressure Seals: Theory Versus Experiment

# publications[].label
Friction Factor Jump in Honeycomb Seals Explained by Flow-Acoustic Interactions

# publications[].label
Experimental rotordynamic coefficient results for (a) a labyrinth seal with and without shunt injection and (b) a honeycomb seal

# publications[].label
Annular gas seal analysis using empirical entrance and exit region friction factors

# publications[].label
Rotordynamic moment coefficients for finite-length turbulent seals.

# publications[].label
The Impact of Pad Flexibility on the Rotordynamic Coefficients of Tilting-Pad Journal Bearings

# publications[].label
Eccentricity effects on the rotordynamic coefficients of plain annular seals: Theory versus experiment

# publications[].label
Friction-factor data for flat-plate tests of smooth and honeycomb surfaces

# publications[].label
IMPROVING TILTING-PAD JOURNAL BEARING PREDICTIONS: PART I - MODEL DEVELOPMENT AND IMPACT OF ROTOR-EXCITED VERSUS BEARING-EXCITED IMPEDANCE COEFFICIENTS

# publications[].label
HIGH-REYNOLDS-NUMBER SEAL TEST FACILITY: FACILITY DESCRIPTION AND PRELIMINARY TEST DATA.

# publications[].label
ADDITIONAL TEST-RESULTS FOR ROUND-HOLE-PATTERN DAMPER SEALS - LEAKAGE, FRICTION FACTORS, AND ROTORDYNAMIC FORCE COEFFICIENTS

# publications[].label
MEASUREMENTS VERSUS PREDICTIONS FOR THE ROTORDYNAMIC CHARACTERISTICS OF A 5-PAD, ROCKER-PIVOT, TILTING-PAD BEARING IN LOAD BETWEEN PAD CONFIGURATION

# publications[].label
A study of the effects of inlet preswirl on the dynamic coefficients of a straight-bore honeycomb gas damper seal

# publications[].label
VIBRATION CHARACTERISTICS OF THE HPOTP (HIGH-PRESSURE OXYGEN TURBOPUMP) OF THE SSME (SPACE SHUTTLE MAIN ENGINE).

# publications[].label
Discussion: The Lomakin Effect in Annular Gas Seals Under Choked Flow Conditions (Arghir, M., Defaye, C., and Frne, F., 2007, ASME J. Eng. Gas Turbines Power, 129, pp. 10281034)

# publications[].label
Measurements Versus Predictions for Rotordynamic Characteristics of a Flexure Pivot-Pad Tilting Pad Bearing in an LBP Condition at Higher Unit Loads

# publications[].label
THE IMPACT OF HOLE DEPTH ON THE ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF HOLE-PATTERN-STATOR GAS ANNULAR SEALS

# publications[].label
Rotordynamic coefficients and leakage flow of circumferentially-grooved liquid-seals

# publications[].label
SPACE SHUTTLE MAIN ENGINE HIGH-PRESSURE FUEL TURBOPUMP ROTORDYNAMIC INSTABILITY PROBLEM.

# publications[].label
Development of Advanced Seals for Space Propulsion Turbomachinery

# publications[].label
A STUDY ON THE LEAKAGE AND ROTORDYNAMIC COEFFICIENTS OF A LONG-SMOOTH SEAL WITH LAMINAR-TWO-PHASE, MAINLY-OIL MIXTURES

# publications[].label
Investigation Into a Steam Whirl Which Affected HP Rotors of 300 MW Steam Turbines

# publications[].label
VIBRATION CHARACTERISTICS OF THE HPOTP (HIGH-PRESSURE OXYGEN TURBOPUMP) OF THE SSME (SPACE-SHUTTLE MAIN ENGINE)

# publications[].label
ONE EXPLANATION FOR 2N RESPONSE DUE TO MISALIGNMENT IN ROTORS CONNECTED BY FLEXIBLE COUPLINGS

# publications[].label
Thermal effects in cryogenic liquid annular seals. Part I. Theory and approximate solution

# publications[].label
Improving Tilting-Pad Journal Bearing Predictions-Part II: Comparison of Measured and Predicted Rotor-Pad Transfer Functions for a Rocker-Pivot Tilting-Pad Journal Bearing

# publications[].label
TRANSIENT ROTORDYNAMIC ANALYSIS FOR THE SPACE-SHUTTLE MAIN ENGINE HIGH-PRESSURE OXYGEN TURBOPUMP

# publications[].label
Eccentricity effects on the rotordynamic coefficients of plain annular seals: Theory versus experiment

# publications[].label
Prediction of dry-friction whirl and whip between a rotor and a stator

# publications[].label
PRESWIRL AND MIXED-FLOW (MAINLY-LIQUID) EFFECTS ON ROTORDYNAMIC PERFORMANCE OF A LONG (L/D=0.75) SMOOTH SEAL

# publications[].label
Analysis and testing for rotordynamic coefficients of turbulent annular seals with different, directionally homogeneous surface-roughness treatment for rotor and stator elements.

# publications[].label
The Space Shuttle main engine high pressure fuel turbopump rotordynamic instability problem.

# publications[].label
Measurements Versus Predictions for the Static and Dynamic Characteristics of a Four-Pad, Rocker-Pivot, Tilting-Pad Journal Bearing

# publications[].label
Testing of turbulent seals for rotordynamic coefficients.

# publications[].label
Understanding friction factor behavior in liquid annular seals with deliberately roughened surfaces

# publications[].label
Experimental Leakage and Rotordynamic Results for Helically Grooved Annular Gas Seals

# publications[].label
The Space Shuttle Main Engine High-Pressure Fuel Turbopump Rotordynamic Instability Problem

# publications[].label
An entrance region friction factor model applied to annular seal analysis: theory versus experiment for smooth and honeycomb seals.

# publications[].label
Measurement Versus Predictions of Rotordynamic Coefficients of a Hole-Pattern Gas Seal With Negative Preswirl

# publications[].label
Test results for rotordynamic coefficients of the SSME HPOTP turbine interstage seal with two swirl brakes

# publications[].label
IWATSUBO-BASED SOLUTION FOR LABYRINTH SEALS - COMPARISON WITH EXPERIMENTAL RESULTS.

# publications[].label
ANNULAR HONEYCOMB-STATOR TURBULENT GAS SEAL ANALYSIS USING A NEW FRICTION-FACTOR MODEL-BASED ON FLAT-PLATE TESTS

# publications[].label
Static and Dynamic Performance of Pressure Dam Bearings With Dam Steps That Are (I) Square and (II) Filleted

# publications[].label
MEASUREMENTS VERSUS PREDICTIONS FOR ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF A CONVERGENT-TAPERED, HONEYCOMB-STATOR/SMOOTH-ROTOR ANNULAR GAS SEAL

# publications[].label
The Influence of Real Gas Properties on Predictions of Static and Rotordynamic Properties of Annular Seals for Injection Compressors

# publications[].label
Two Jeffcott-Based Modal Simulation Models for Flexible Rotating Equipment

# publications[].label
Friction-factor characteristics for narrow channels with honeycomb surfaces

# publications[].label
Impact of Frequency Dependence of Gas Labyrinth Seal Rotordynamic Coefficients on Centrifugal Compressor Stability

# publications[].label
TRANSIENT ROTORDYNAMIC ANALYSIS FOR THE SPACE-SHUTTLE MAIN ENGINE HIGH-PRESSURE OXYGEN TURBOPUMP.

# publications[].label
Experimental Rotordynamic Coefficient Results for Teeth-on-Rotor and Teeth-on-Stator Labyrinth Gas Seals

# publications[].label
Clearance Effects on Rotordynamic Performance of a Long Smooth Seal With Two-Phase, Mainly-Air Mixtures

# publications[].label
A rotordynamic analysis of an annular honeycomb seal using a two-control volume model

# publications[].label
FRACTIONAL-FREQUENCY ROTOR MOTION DUE TO NONSYMMETRIC CLEARANCE EFFECTS.

# publications[].label
The Space Shuttle Main Engine High-Pressure Fuel Turbopump Rotordynamic Instability Problem

# publications[].label
Measured Static and Rotordynamic Coefficient Results for a Rocker-Pivot, Tilting-Pad Bearing With 50 and 60% Offsets

# publications[].label
THEORETICAL AND EXPERIMENTAL COMPARISONS FOR ROTORDYNAMIC COEFFICIENTS OF A HIGH-SPEED, HIGH-PRESSURE, ORIFICE-COMPENSATED HYBRID BEARING

# publications[].label
Annular honeycomb seals: test results for leakage and rotordynamic coefficients; comparisons to labyrinth and smooth configurations.

# publications[].label
Frequency dependency of measured and predicted rotordynamic coefficients for a load-on-pad flexible-pivot tilting-pad bearing

# publications[].label
Measurements of rotordynamic coefficients of hybrid bearings with (a) a plugged orifice, (b) a worn land surface

# publications[].label
ROTORDYNAMIC COEFFICIENTS AND LEAKAGE FLOW OF CIRCUMFERENTIALLY GROOVED LIQUID-SEALS

# publications[].label
Dynamic force performance of annular gas seals at off-center conditions

# publications[].label
Rotordynamic evaluation of a roughened-land hybrid bearing

# publications[].label
Effects of Clearance on the Performance of a Labyrinth Seal Under Wet-Gas Conditions

# publications[].label
Comparison of experimental and theoretical results for leakage, pressure gradients, and rotordynamic coefficients for tapered annular gas seal.

# publications[].label
FRICTION FACTOR BEHAVIOR FROM FLAT-PLATE TESTS OF SMOOTH AND HOLE-PATTERN ROUGHENED SURFACES WITH SUPPLY PRESSURES UP TO 84 BARS

# publications[].label
Theory Versus Experiment for the Effects of Pressure Ratio on the Performance of an Orifice-Compensated Hybrid Bearing

# publications[].label
Rotordynamics of a Two-Phase Flow Twin Screw Pump

# publications[].label
Predicted Rotordynamic Behavior of a Labyrinth Seal as Rotor Surface Speed Approaches Mach 1

# publications[].label
A New, Iterative, Synchronous-Response Algorithm for Analyzing the Morton Effect

# publications[].label
Vibration characteristics of the HPOTP (high-pressure oxygen turbopump) of the SSME (space shuttle main engine).

# publications[].label
Rotordynamic forces developed by labyrinth seals.

# publications[].label
Including Housing-Casing Fluid in a Lateral Rotordynamics Analysis on Electric Submersible Pumps

# publications[].label
The acoustic influence of cell depth on the rotordynamic characteristics of smooth-rotor/honeycomb-stator annular gas seals

# publications[].label
Residual-Flexibility Corrections for Transient Modal Rotordynamic Models

# publications[].label
The Impact of Hole Depth on the Rotordynamic and Leakage Characteristics of Hole-Pattern-Stator Gas Annular Seals

# publications[].label
Measurements Versus Predictions for a Hybrid (Hydrostatic Plus Hydrodynamic) Thrust Bearing for a Range of Orifice Diameters

# publications[].label
EXPERIMENTAL STUDY OF THE STATIC AND DYNAMIC CHARACTERISTICS OF A LONG (L/D=0.75) LABYRINTH ANNULAR SEAL OPERATING UNDER TWO-PHASE (LIQUID/GAS) CONDITIONS

# publications[].label
Experimental results for labyrinth gas seals with honeycomb stators: Comparisons to smooth-stator seals and theoretical predictions

# publications[].label
COMPARATIVE LIFT-OFF PERFORMANCE IN FLEXURE PIVOT PAD AND HYBRID (HYDROSTATIC AND HYDRODYNAMIC) BEARINGS WITH WATER AS THE TEST FLUID

# publications[].label
FORCE AND MOMENT ROTORDYNAMIC COEFFICIENTS FOR PUMP-IMPELLER SHROUD SURFACES.

# publications[].label
THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC COEFFICIENTS OF ANNULAR GAS SEALS .1. TEST FACILITY AND APPARATUS

# publications[].label
Theory versus experiment for the effects of pressure ratio on the performance of an orifice-compensated hybrid bearing

# publications[].label
THE NUMERICAL AND EXPERIMENTAL CHARACTERISTICS OF MULTI-MODE DRY-FRICTION WHIP AND WHIRL

# publications[].label
THERMAL EFFECTS IN CRYOGENIC LIQUID ANNULAR SEALS .2. NUMERICAL-SOLUTION AND RESULTS

# publications[].label
Rotordynamic Characteristics of a Flexure Pivot Pad Bearing With an Active and Locked Integral Squeeze Film Damper

# publications[].label
ROTORDYNAMICS OF A 2-PHASE FLOW TWIN SCREW PUMP

# publications[].label
EXPERIMENTAL VERSUS THEORETICAL CHARACTERISTICS OF A HIGH-SPEED HYBRID (COMBINATION HYDROSTATIC AND HYDRODYNAMIC) BEARING

# publications[].label
New steps to improve rotordynamic stability predictions of centrifugal compressors

# publications[].label
Friction-factor characteristics for narrow channels with honeycomb surfaces

# publications[].label
TEST-RESULTS FOR TURBULENT ANNULAR SEALS, USING SMOOTH ROTORS AND HELICALLY GROOVED STATORS

# publications[].label
Experimental leakage and rotordynamic results for helically grooved annular gas seals

# publications[].label
Dry-Friction Whirl and Whip Between a Rotor and a Stator: Effect of Rotor-Stator Coupling Due to Seals and Rotor Rigid-Body Dynamics

# publications[].label
Test Results for Sawtooth-Pattern Damper Seals: Leakage and Rotordynamic Coefficients

# publications[].label
Thermal effects in cryogenic liquid annular seals. Part II. Numerical solution and results

# publications[].label
A Modal Transient Rotordynamic Model for Dual-Rotor Jet Engine Systems

# publications[].label
Acoustic influence of cell depth on the rotordynamic characteristics of smooth-rotor/honeycomb-stator annular gas seals

# publications[].label
STATIC DESTABILIZING BEHAVIOR FOR GAS ANNULAR SEALS AT HIGH ECCENTRICITY RATIOS

# publications[].label
ANALYSIS AND TESTING FOR ROTORDYNAMIC COEFFICIENTS OF TURBULENT ANNULAR SEALS WITH DIFFERENT, DIRECTIONALLY-HOMOGENEOUS SURFACE-ROUGHNESS TREATMENT FOR ROTOR AND STATOR ELEMENTS

# publications[].label
A Design to Improve the Effective Damping Characteristics of Hole-Pattern-Stator Annular Gas Seals

# publications[].label
Clearance effects on leakage and rotordynamic coefficients of smooth, liquid annular seals.

# publications[].label
THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC COEFFICIENT OF LABYRINTH GAS SEALS .2. A COMPARISON TO EXPERIMENT

# publications[].label
A high Reynolds-number seal test facility: facility description and preliminary test data.

# publications[].label
Rotordynamics involving axial rubbing against a disk

# publications[].label
Analysis for rotordynamic coefficients of helically-grooved turbulent annular seals.

# publications[].label
A NOTE ON CRITICAL-SPEED SOLUTIONS FOR FINITE-ELEMENT-BASED ROTOR MODELS

# publications[].label
Finite-length solutions for rotodynamic coefficients of turbulent annular seals.

# publications[].label
Annular seals for non-contact sealing of fluids in turbomachinery

# publications[].label
Rotordynamic evaluation of a near-tangential-injection hybrid bearing

# publications[].label
A Modal Transient Simulation Model for Flexible Asymmetric Rotors

# publications[].label
Discussion of "Non-Axisymmetric Flows and Rotordynamic Forces in an Eccentric Shrouded Centrifugal Compressor-Part 2: Analysis" (Song, J., and Song S. J., ASME J. Eng. Gas Turbines Power, 141(11), p. 111015)

# publications[].label
A Test Apparatus and Facility to Identify the Rotordynamic Coefficients of High-Speed Hydrostatic Bearings

# publications[].label
Additional Test Results for Round-Hole-Pattern Damper Seals: Leakage, Friction Factors, and Rotordynamic Force Coefficients

# publications[].label
Effects of converging and diverging axial taper on the rotordynamic coefficients of liquid annular pressure seals: theory versus experiment

# publications[].label
A Rotor-Fixed Modal Simulation Model for Flexible Rotating Equipment

# publications[].label
Lateral Equilibrium Position Analysis Program With Applications to Electric Submersible Pumps

# publications[].label
A high-Reynolds-number seal test facility; facility description and preliminary test data.

# publications[].label
THERMAL EFFECTS IN CRYOGENIC LIQUID ANNULAR SEALS .1. THEORY AND APPROXIMATE SOLUTION

# publications[].label
FRICTION-FACTOR DATA FOR FLAT-PLATE TESTS OF SMOOTH AND HONEYCOMB SURFACES

# publications[].label
The influence of groove size on the static and rotordynamic characteristics of short, laminar-flow annular seals

# publications[].label
ROTORDYNAMIC MOMENT COEFFICIENTS FOR FINITE-LENGTH TURBULENT SEALS.

# publications[].label
Angled injection - Hydrostatic bearings analysis and comparison to test results

# publications[].label
Convergent-tapered annular seals analysis for rotodynamic coefficients.

# publications[].label
Experimental and theoretical comparison of two swirl brake designs

# publications[].label
Experimental Study of the Static and Dynamic Characteristics of a Long (L/D=0.75) Labyrinth Annular Seal Operating Under Two-Phase (Liquid/Gas) Conditions

# publications[].label
One Explanation for Two-Times Running Speed Response Due to Misalignment in Rotors Connected by Flexible Couplings

# publications[].label
Dry-Friction Whip and Whirl Predictions for a Rotor-Stator Model With Rubbing Contact at Two Locations

# publications[].label
ANALYSIS FOR ROTORDYNAMIC COEFFICIENTS OF HELICALLY-GROOVED TURBULENT ANNULAR SEALS.

# publications[].label
ROTORDYNAMIC COEFFICIENT TEST-RESULTS FOR A 4-STAGE BRUSH SEAL

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
ROTORDYNAMIC PERFORMANCE OF A NEGATIVE-SWIRL BRAKE FOR A TOOTH-ON-STATOR LABYRINTH SEAL

# publications[].label
Influence of groove size on the static and rotordynamic characteristics of short, laminar-flow annular seals

# publications[].label
Finite-length solutions for the rotordynamic coefficients of constant-clearance and convergent-tapered annular seals.

# publications[].label
An Experimental Investigation of the Dynamic Performance of a Vertical-Application Three-Lobe Bearing

# publications[].label
DYNAMIC ANALYSIS OF TURBULENT ANNULAR SEALS BASED ON HIRS' LUBRICATION EQUATION.

# publications[].label
Measurements versus predictions for the dynamic impedance of annular gas seals - Part I: Test facility and apparatus

# publications[].label
Comments on a Newly-Identified Destabilizing Rotordynamic Mechanism Arising in Vertical Hydraulic Turbines and the Back Shrouds of Centrifugal Impellers

# publications[].label
A NEW, ITERATIVE, SYNCHRONOUS-RESPONSE ALGORITHM FOR ANALYZING THE MORTON EFFECT

# publications[].label
Journal bearing impedance descriptions for rotodynamic applications.

# publications[].label
A STUDY FOR ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF A LONG-HONEYCOMB SEAL WITH TWO-PHASE, MAINLY AIR MIXTURES

# publications[].label
Annular seals for non-contact sealing of fluids in turbomachinery

# publications[].label
JOURNAL BEARING IMPEDANCE DESCRIPTIONS FOR ROTORDYNAMIC APPLICATIONS.

# publications[].label
A comparison of experimental rotordynamic coefficients and leakage characteristics between hole-pattern gas damper seals and a honeycomb seal

# publications[].label
FINITE-LENGTH SOLUTIONS FOR ROTORDYNAMIC COEFFICIENTS OF TURBULENT ANNULAR SEALS.

# publications[].label
FRACTIONAL-FREQUENCY ROTOR MOTION DUE TO NONSYMMETRIC CLEARANCE EFFECTS

# publications[].label
Measurements versus predictions for the dynamic impedance of annular gas seals - Part II: Smooth and honeycomb geometries

# publications[].label
Journal bearing impedance descriptions for rotodynamic applications.

# publications[].label
Static Performance Characteristics and Rotordynamic Coefficients for a Four-Pad Ball-in-Socket Tilting Pad Journal Bearing

# publications[].label
A Study of the Effects of Inlet Preswirl on the Dynamic Coefficients of a Straight-Bore Honeycomb Gas Damper Seal

# publications[].label
CONVERGENT-TAPERED ANNULAR SEALS - ANALYSIS AND TESTING FOR ROTORDYNAMIC COEFFICIENTS

# publications[].label
Experimental results for labyrinth gas seals with honeycomb stators: comparisons to smooth-stator seals and theoretical predictions.

# publications[].label
Static and Rotordynamic Characteristics for a New Hole-Pattern Annular Gas Seal Design Incorporating Larger Diameter Holes

# publications[].label
Preswirl and Mixed-Flow (Mainly Liquid) Effects on Rotordynamic Performance of a Long (L/D=0.75) Smooth Seal

# publications[].label
THEORY VERSUS EXPERIMENT FOR THE ROTORDYNAMIC COEFFICIENTS OF LABYRINTH GAS SEALS: PART II - A COMPARISON TO EXPERIMENT.

# publications[].label
Analysis and testing for rotordynamic coefficients of turbulent annular seals with different, directionally-homogeneous surface-roughness treatment for rotor and stator elements.

# publications[].label
MEASUREMENT VERSUS PREDICTIONS OF ROTORDYNAMIC COEFFICIENTS OF A HOLE-PATTERN GAS SEAL WITH NEGATIVE PRESWIRL

# publications[].label
COMMENTS ON A NEWLY-IDENTIFIED DESTABILIZING ROTORDYNAMIC MECHANISM ARISING IN VERTICAL HYDRAULIC TURBINES AND THE BACK SHROUDS OF CENTRIFUGAL IMPELLERS

# publications[].label
Static and Dynamic Characteristics for a Pressure-Dam Bearing

# publications[].label
TEST-RESULTS FOR ROTORDYNAMIC COEFFICIENTS OF THE SSME HPOTP TURBINE INTERSTAGE SEAL WITH 2 SWIRL BRAKES

# publications[].label
Identification of rotordynamic forces in a flexible rotor system using magnetic bearings

# publications[].label
Rub-Induced Parametric Excitation in Rotors

# publications[].label
Understanding friction factor behavior in liquid annular seals with deliberately roughened surfaces, roughness geometric characteristics defining flow resistance

# publications[].label
DRY-FRICTION WHIP AND WHIRL PREDICTIONS FOR A ROTOR-STATOR MODEL WITH RUBBING CONTACT AT TWO LOCATIONS

# publications[].label
A Movable-Mass Attitude Stabilization System For Cable-Connected Artificial-^ Space Stations

# publications[].publisher
American Institute of Aeronautics and Astronautics (AIAA)

# publications[].label
Discussion of "Non-Axisymmetric Flows and Rotordynamic Forces in an Eccentric Shrouded Centrifugal Compressor-Part 1: Measurement" (Song, J., Kim, S., Park, T. C., Cha, B.-J., Lim, D. H., Hong, J. S., Lee, T. W., and Song, S. J., ASME J. Eng. Gas Turbines Power, 141(11), p. 111014)

# publications[].label
FINITE-LENGTH SOLUTIONS FOR THE ROTORDYNAMIC COEFFICIENTS OF CONSTANT-CLEARANCE AND CONVERGENT-TAPERED ANNULAR SEALS.

# publications[].label
SSME seal test program: test results for saw-tooth pattern damper seal.

# publications[].label
Static Performance Characteristics and Rotordynamic Coefficients for a Four-Pad Ball-in-Socket Tilting Pad Journal Bearing

# publications[].label
Acoustic influence of cell depth on the rotordynamic characteristics of smooth-rotor/honeycomb-stator annular gas seals

# publications[].label
Dynamic characteristics of the diverging taper honeycomb-stator seal

# publications[].label
An Iwatsubo-Based Solution for Labyrinth Seals: Comparison to Experimental Results

# publications[].label
MEASURED ROTORDYNAMIC AND LEAKAGE CHARACTERISTICS OF A TOOTH-ON-ROTOR LABYRINTH SEAL WITH COMPARISONS TO A TOOTH-ON-STATOR LABYRINTH SEAL AND PREDICTIONS

# publications[].label
Fiber-optic strain gauge calibration and dynamic flexibility transfer function identification in magnetic bearings

# publications[].label
Test Results for Sawtooth-Pattern Damper Seals: Leakage and Rotordynamic Coefficients

# streetAddress
Texas A&M University; Mechanical Engineering; 3123 TAMU

# etdChairOf[].label
Wilkes, Jason C. (2008-08). A PERSPECTIVE ON THE NUMERICAL AND EXPERIMENTAL CHARACTERISTICS OF MULTI-MODE DRY-FRICTION WHIP AND WHIRL. Master's Thesis.

# etdChairOf[].label
Arthur, Stephen Patrick (2015-12). Measured Rotordynamic Coefficients and Leakage for a Tooth-on-Rotor Labyrinth Seal with Comparisons to a Tooth-on-Stator Labyrinth Seal. Master's Thesis.

# etdChairOf[].label
Carter, Clint Ryan (2007-08). Measured and predicted rotordynamic coefficients and static performance of a rocker-pivot, tilt pad bearing in load-on-pad and load-between-pad configurations. Master's Thesis.

# etdChairOf[].label
Coghlan, David (2014-08). Static, Rotordynamic, and Thermal Characteristics of a Four Pad Spherical-Seat Tilting Pad Journal Bearing with Four Methods of Directed Lubrication. Master's Thesis.

# etdChairOf[].label
Zutavern, Zachary Scott (2006-08). Identification of rotordynamic forces in a flexible rotor system using magnetic bearings. Doctoral Dissertation.

# etdChairOf[].label
Moreland, James Alexander (2016-05). Influence of Pre-Swirl and Eccentricity in Smooth Stator/Grooved Rotor Liquid Annular Seals, Measured Static and Rotordynamic Characteristics. Master's Thesis.

# etdChairOf[].label
Khatri, Rasish (2014-08). An Experimental Investigation of the Static and Dynamic Performance of Horizontal-Application and Vertical-Application Three-Lobe Bearings. Master's Thesis.

# etdChairOf[].label
Norrbin, Clay Sven (2016-12). Housing Shape's Impact on Electric Submersible Pump's Equilibrium Position and Rotordynamics. Master's Thesis.

# etdChairOf[].label
Wilkes, Jason Christopher (2012-02). Measured and Predicted Rotor-Pad Transfer Functions for a Rocker-Pivot Tilting-Pad Journal Bearing. Doctoral Dissertation.

# etdChairOf[].label
Saha, Rohit (2012-02). A New, Iterative, Synchronous-Response Algorithm for Analyzing the Morton Effect. Master's Thesis.

# etdChairOf[].label
Mehta, Naitik (2012-07). Comparison of a Slanted-Tooth See-Through Labyrinth Seal to a Straight-Tooth See-Through Labyrinth Seal for Rotordynamic Coefficients and Leakage. Master's Thesis.

# etdChairOf[].label
Salas III, Jesus (2016-05). Influence of Pressure-Dams in Liquid Annular Seals in the Laminar Flow Regime, Measured Results for Static and Rotordynamic Characteristics. Master's Thesis.

# etdChairOf[].label
Gary, Keith William (2017-10). Measurements of the Leakage and Rotordynamic Performance of Interlocking Labyrinth Seals. Master's Thesis.

# etdChairOf[].label
Al Jughaiman, Bader K. (2006-08). Static and dynamic characteristics for a two-axial-groove bearing and a pressure-dam bearing. Master's Thesis.

# etdChairOf[].label
Shrestha, Hari Krishna (2018-03). Experimental Study of the Static and Dynamic Characteristics of a Long (L/D=0.75) Labyrinth Annular Seal Operating Under Two-Phase (Liquid/Gas) Conditions. Master's Thesis.

# etdChairOf[].label
Vannarsdall, Michael Lloyd (2012-10). Measured Results for a New Hole-Pattern Annular Gas Seal Incorporating Larger Diameter Holes, Comparisons to Results for a Traditional Hole-Pattern Seal and Predictions. Master's Thesis.

# etdChairOf[].label
Torres, Jose Maria (2016-12). Static and Rotordynamic Characteristics of Liquid Annular Seals with a Circumferentially-Grooved Stator and Smooth Rotor using Three Levels of Circumferential Inlet-Fluid Rotation. Master's Thesis.

# etdChairOf[].label
Thorat, Manish R. (2010-05). Impact of Rotor Surface Velocity, Leakage Models and Real Gas Properties on Rotordynamic Force Predictions of Gas Labyrinth Seals. Master's Thesis.

# etdChairOf[].label
Esser, Paul R. (2010-05). Measurements versus Predictions for a Hybrid (Hydrostatic plus Hydrodynamic Thrust Bearing for a Range of Orifice Diameters. Master's Thesis.

# etdChairOf[].label
Deva Asirvatham, Thanesh (2010-12). Friction Factor Measurement, Analysis, and Modeling for Flat-Plates with 12.15 mm Diameter Hole-Pattern, Tested with Air at Different Clearances, Inlet Pressures, and Pressure Ratios. Master's Thesis.

# etdChairOf[].label
James, Stephen M. (2010-05). Adapting a Beam-Based Rotordynamics Model to Accept a General Three-Dimensional Finite-Element Casing Model. Master's Thesis.

# etdChairOf[].label
Ramirez Alanis, Mauricio Alan (2017-12). Development and Validation of Test Rig for Measurements of Leakage and Rotordynamic Performance of Interlocking Gas Labyrinth Seals. Master's Thesis.

# etdChairOf[].label
Elrod, David Alan (1988-04). Entrance and exit region friction factor models for annular seal analysis. Doctoral Dissertation.

# etdChairOf[].label
Tschoepe, David 1987- (2012-08). Measurements Versus Predictions for the Static and Dynamic Characteristics of a Four-pad Rocker-pivot, Tilting-pad Journal Bearing. Master's Thesis.

# etdChairOf[].label
Aboel Hassan Muhammed, Ameen (2013-02). Rotordynamics of Twin-Screw Pumps. Doctoral Dissertation.

# etdChairOf[].label
Kheireddin, Bassem A. (2009-08). Investigation Of The Friction Factor Behavior for Flat Plate Tests Of Smooth And Roughened Surfaces With Supply Pressures Up To 84 Bars. Master's Thesis.

# etdChairOf[].label
Kumar, Dhruv Dileep (2011-10). Backward Precessional Whip and Whirl for a Two Point Rubbing Contact Model of a Rigid Rotor Supported by an Elastically Supported Rigid Stator. Master's Thesis.

# etdChairOf[].label
Klooster, David (2009-12). Transient Lift-off Test Results for an Experimental Hybrid Bearing in Air. Master's Thesis.

# etdChairOf[].label
Kulhanek, Chris David (2012-02). Dynamic and Static Characteristics of a Rocker-Pivot, Tilting-Pad Bearing with 50% and 60% Offsets.. Master's Thesis.

# etdChairOf[].label
Najeeb, Ovais Ahmed Bin (2017-11). Static and Rotordynamic Analysis of a Plain Annular (Liquid) Seal in the Laminar Regime with a Swirl Brake for Three Clearances. Master's Thesis.

# etdChairOf[].label
Bullock, Joshua Thomas (2019-03). The Effects of Imposed Pre-Swirl on the Static and Rotordynamic Performance for Smooth Annular Liquid Seals. Master's Thesis.

# etdChairOf[].label
Balke, Nathan Edward (2017-12). Analyzing the Influence of a Swirl Brake on a Smooth Liquid Annular Seal Through Measuring Static and Rotordynamic Characteristics. Master's Thesis.

# etdChairOf[].label
Agnew, Jeffrey Scott (2012-02). Rotordynamic Performance of a Flexure Pivot Pad Bearing with Active and Locked Integral Squeeze Film Damper Including Predictions. Master's Thesis.

# etdChairOf[].label
Avendano Ovalle, Raul David (2011-10). An Analysis of the Impact of Flexible Coupling Misalignment on Rotordynamics. Master's Thesis.

# etdChairOf[].label
Kluitenberg, Matthew P (2015-04). Experimentally Determine the Impact of Jacking-Oil Pockets on the Rotordynamic Characteristics of a Four-Pad, LBP, Tilting-Pad Journal Bearing. Master's Thesis.

# etdChairOf[].label
Brown, Philip David (2012-10). Measurement Versus Predictions of Rotordynamic Coefficients and Leakage Rates for a Hole-Pattern Gas Seal with Negative Preswirl. Master's Thesis.

# etdChairOf[].label
Rodrigues Rodrigues, Margarita (2006-12). Improving performance and rotordynamic characteristics of injection compressors via much longer balance-piston and division-wall seals. Master's Thesis.

# etdChairOf[].label
Kerr, Thomas Chandler (2017-10). Static and Dynamic Coefficient Measurements for a Thrust Collar Used in an Integrally Geared Compressor. Master's Thesis.

# etdChairOf[].label
Gaines, Jennifer Elizabeth (2014-12). Examining the Impact of Pad Flexibility on the Rotordynamic Coefficients of Rocker-Pivot-Pad Tilting-Pad Journal Bearings. Master's Thesis.

# etdChairOf[].label
Zhang, Min (2017-12). Experimental Study of the Static and Dynamic Characteristics of a Long (L/D=0.65) Smooth Annular Seal Operating Under Two-Phase (Liquid/Gas) Conditions. Doctoral Dissertation.

# etdChairOf[].label
Eitrheim, Nathan David (2017-10). Measured Static and Rotordynamic Characteristics of a Circumferentially-grooved-stator/smooth-rotor Liquid Annular Seal: Influence of Viscosity, Eccentricity, Pressure, and Speed. Master's Thesis.