# positions[].organizations[].parent[].label
Texas A&M Engineering Experiment Station (TEES)

# overview
My research interests include tribology, nanotechnology, microtribology related to miniature systems, magnetic storage, surface characterization, friction/vibration interaction, system dynamics and modeling, and experimental design and instrumentation. Specifically, I study micro/nanotribology of magnetic head disk interfaces and microelectromechanical systems. Recent emphasis has been on the tribology of devices for reduced energy and improved environmental-related impact, such as the use of carbon dioxide as a natural refrigerant and the use of surface treatments towards oil-lees machine operation.

# keywords[]
Microencapsulated Phase Change Material (mpcm)

# keywords[]
4007 Control Engineering, Mechatronics And Robotics

# keywords[]
4007 Control Engineering, Mechatronics And Robotics

# keywords[]
4007 Control Engineering, Mechatronics And Robotics

# keywords[]
4007 Control Engineering, Mechatronics And Robotics

# keywords[]
Contacting Rough Compliant Curved Surfaces

# keywords[]
Physics-based Models Of Contact And Friction

# keywords[]
Discontinuous Galerkin (dg) Methods For Interfaces

# keywords[]
4007 Control Engineering, Mechatronics And Robotics

# keywords[]
Structural And Multifunctional Energy Storage

# educationAndTraining[].organization.label
University at Buffalo, State University of New York - (Buffalo, New York, United States)

# educationAndTraining[].organization.label
University at Buffalo, State University of New York - (Buffalo, New York, United States)

# educationAndTraining[].organization.label
University at Buffalo, State University of New York - (Buffalo, New York, United States)

# awardsAndHonors[].label
Faculty Early Career Development (CAREER) Program

# publications[].label
Effect of Planarization on the Contact Behavior of Patterned Media

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
ANALYSIS OF TOPOGRAPHICAL CHANGES AND ADHESION FAILURES IN GOLD-TO-GOLD METAL RF MEMS SWITCHES WITH CYCLING

# publications[].label
Measurement and Modeling of Adhesion Energy Between Two Rough Microelectromechanical System (MEMS) Surfaces

# publications[].label
Elevated temperature mechanical properties of Inconel 617 surface oxide using nanoindentation

# publications[].label
Helium Tribology of Inconel 617 at Elevated Temperatures up to 950 degrees C: Parametric Study

# publications[].label
Wear of conventional pearlitic and improved bainitic rail steels

# publications[].label
BOUNDARY AND MIXED FRICTION IN THE PRESENCE OF DYNAMIC NORMAL LOADS .2. FRICTION TRANSIENTS

# publications[].label
Surface characterization, adhesion measurements and modeling of microelectromechanical systems

# publications[].label
Contact of rough surfaces with asymmetric distribution of asperity heights

# publications[].label
A dynamic friction model for unlubricated rough planar surfaces

# publications[].label
Effect of surface polishing on the tribological performance of hard coatings under lubricated three-body abrasive conditions

# publications[].label
Ultrastrong, Chemically Resistant Reduced Graphene Oxide-based Multilayer Thin Films with Damage Detection Capability.

# publications[].label
The effect of defects on the cyclic behavior of polymeric 3D kirigami structures

# publications[].label
Biocompatible Electrodes: Development of FluorineFree Tantalum Carbide MXene Hybrid Structure as a Biocompatible Material for Supercapacitor Electrodes (Adv. Funct. Mater. 30/2021)

# publications[].label
Creep Behavior of Graphene Oxide, Silk Fibroin, and Cellulose Nanocrystal Bionanofilms

# publications[].label
Crystallite coalescence during film growth based on improved contact mechanics adhesion models

# publications[].label
Mechanics and deformation of shape memory polymer kirigami microstructures

# publications[].label
Experimental and theoretical evaluation of friction at contacting magnetic storage slider-disk interfaces

# publications[].label
Rough Surface Normal Nanocontact Stiffness: Experimental Measurements and Rough Surface Contact Model Predictions

# publications[].label
Micro and nanoscale experiments and finite element studies of rail steels

# publications[].label
Extracting summit roughness parameters from random Gaussian surfaces accounting for asymmetry of the summit heights

# publications[].label
Correlation between laboratory ball-on-disk and full-scale rail performance tests

# publications[].label
An advanced rough surface continuum-based contact and sliding model in the presence of molecularly thin lubricant

# publications[].label
Elevated-Temperature and -Pressure Tribology of Drilling Fluids Used in Oil and Gas Extended-Reach-Drilling Applications

# publications[].label
Tribological Study Comparing PAG and POE Lubricants Used in Air-Conditioning Compressors under the Presence of CO2

# publications[].label
BOUNDARY AND MIXED FRICTION IN THE PRESENCE OF DYNAMIC NORMAL LOADS .1. SYSTEM MODEL

# publications[].label
Nanoscratch and nanofriction behavior of hafnium diboride thin films

# publications[].label
Optimization of thermal fly-height control slider geometry for Tbit/in(2) recording

# publications[].label
Optimizing the performance of ion-transfer and energy store via hexagonally ordered alumina nanopore template based electrode

# publications[].label
Fretting experiments of advanced polymeric coatings and the effect of transfer films on their tribological behavior

# publications[].label
Comparison of the static friction subboundary lubrication model with experimental measurements on thin-film disks

# publications[].label
Fabrication and Deformation of 3D Multilayered Kirigami Microstructures.

# publications[].label
Electrode architecture of carbon-coated silicon nanowires through magnesiothermic reduction for lithium-ion batteries

# publications[].label
Mechanical and high pressure tribological properties of nanocrystalline Ti(N,C) and amorphous C:H nanocomposite coatings

# publications[].label
Density modulated nanoporous tungsten thin films and their nanomechanical properties

# publications[].label
Erratum: Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part ISystem Model [1995, ASME Journal of Tribology, 117(2), pp. 255260]

# publications[].label
Fast Self-Healing of Polyelectrolyte Multilayer Nanocoating and Restoration of Super Oxygen Barrier.

# publications[].label
Experimental Verification of an Improved Elastic-Plastic Static Friction Model Including Roughness Effects

# publications[].label
Mechanical property measurements of thin-film carbon overcoat on recording media towards 1 Tbit/in(2)

# publications[].label
Design optimisation of sub-5 nm Head-Disk Interfaces using a two-degree-of-freedom dynamic contact model with friction

# publications[].label
Elastic contact mechanics-based contact and flash temperature analysis of impact-induced head disk interface damage

# publications[].label
Adhesive Effects on Dynamic Friction for Unlubricated Rough Planar Surfaces

# publications[].label
Measurements of tangential stiffness and damping of mechanical joints: Direct versus indirect contact resonance methods

# publications[].label
Three-body abrasive wear of hard coatings: Effects of hardness and roughness

# publications[].label
An Improved Tribological Polymer-Coating System for Metal Surfaces

# publications[].label
Engineering outreach to Cub Scouts with hands-on activities pertaining to the Pinewood Derby car race

# publications[].label
Plane strain sliding contact of multilayer magnetic storage thin-films using the finite element method

# publications[].label
The effect of surface roughness on the transfer of polymer films under unlubricated testing conditions

# publications[].label
Micromechanical properties of polymeric coatings

# publications[].label
Effect of Carbon Configuration on Mechanical, Friction and Wear Behavior of Nitrogen-Doped Diamond-Like Carbon Films for Magnetic Storage Applications

# publications[].label
Phase change material compositions and methods for their use to lower surface friction and wear

# publications[].label
Strategies to avoid head-disk instabilities due to adhesion in ultralow flying head-disk interfaces

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Tribological performance of environmentally friendly refrigerant HFO-1234 yf under starved lubricated conditions

# publications[].label
Surface Micro-texturing by Hot Sintering for Advanced Bearing Polymers for Friction Reduction Under Boundary Lubrication

# publications[].label
Tribology of WC/C coatings for use in oil-less piston-type compressors

# publications[].label
Flash temperature during impact of layered elastic solids

# publications[].label
Measuring mechanical properties of fine-wire cross-sections used in medical devices.

# publications[].label
Slider having air bearing surface which includes pads for disk storage system

# publications[].label
American Society of Mechanical Engineers, Tribology Division TRIB: Introduction

# publications[].label
Impact of a Fixed-Length Rigid Cylinder on an Elastic-Plastic Homogeneous Body

# publications[].label
Boundary and mixed friction in the presence of dynamic normal loads .1. System model (vol 117, pg 255, 1995)

# publications[].label
Microscale experimental and modeling wear studies of rail steels

# publications[].label
Influence of Graphene Reduction and Polymer Cross-Linking on Improving the Interfacial Properties of Multilayer Thin Films.

# publications[].label
Improved Elastic Contact Model Accounting for Asperity and Bulk Substrate Deformation

# publications[].label
Tribology of Selected Hard Coatings for Oil and Gas Applications Up to 450 degrees C

# publications[].label
MEASURED TRANSITIONS BETWEEN STICKING AND SLIPPING AT LUBRICATED LINE CONTACTS

# publications[].label
Reducing the effects of adhesion and friction in microelectromechanical systems (MEMSs) through surface roughening: Comparison between theory and experiments

# publications[].label
Adhesion forces for sub-10 nm flying-height magnetic storage Head Disk Interfaces

# publications[].label
Morphology and electric potential-induced mechanical behavior of metallic porous nanostructures

# publications[].label
Development of a controlled-atmosphere, rapid-cooling cryogenic chamber for tribological and mechanical testing.

# publications[].label
An Elastic-plastic Spherical Contact Model under Combined Normal and Tangential Loading

# publications[].label
Experimental and FEA Scratch of Magnetic Storage Thin-Film Disks to Correlate Magnetic Signal Degradation With Permanent Deformation

# publications[].label
Effects of surface roughness and lubrication on the early stages of fretting of mechanical lap joints

# publications[].label
Microencapsulated paraffin as a tribological additive for advanced polymeric coatings

# publications[].label
Use of the focused ion beam technique to produce a sharp spherical diamond indenter for sub-10 nm nanoindentation measurements

# publications[].label
Mechanical properties and wear performance of premium rail steels

# publications[].label
High Velocity Oblique Impact and Coefficient of Restitution for Head Disk Interface Operational Shock

# publications[].label
Tribological Investigation of Cast Iron Air-Conditioning Compressor Surfaces in CO2 Refrigerant

# publications[].label
Texture structure for optimizing head disc interface

# publications[].label
Modeling Sliding Contact of Rough Surfaces with Molecularly Thin Lubricants

# publications[].label
Electrical-potential induced surface wettability of porous metallic nanostructures

# publications[].label
Adhesion and friction evaluation of textured slider surfaces in ultra-low flying head-disk interfaces

# publications[].label
Three-body abrasive wear by (silica) sand of advanced polymeric coatings for tilting pad bearings

# publications[].label
Abrasive wear mechanisms of multi-components ferrous alloys abraded by soft, fine abrasive particles

# publications[].label
Slider Having Air Bearing Surface which Includes Pads for Disk Storage System

# publications[].label
American Society of Mechanical Engineers, Tribology Division, TRIB: Introduction

# publications[].label
ELASTIC/PLASTIC OBLIQUE IMPACT ANALYSIS FOR HEAD DISK INTERFACE OPERATIONAL SHOCK

# publications[].label
Self-welding of Inconel 617 under high-pressure-high-temperature conditions for nuclear reactors

# publications[].label
Dynamic adhesive force measurements under vertical and horizontal motions of interacting rough surfaces.

# publications[].label
Wear Mechanisms of Gray Cast Iron in the Presence of Environmentally Friendly Hydrofluoroolefin-Based Refrigerant and the Effect of Tribofilm Formation

# publications[].label
Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication

# publications[].label
Measured Transitions Between Sticking and Slipping at Lubricated Line Contacts

# publications[].label
Effects of the substrate on the determination of hardness of thin films by the nanoscratch and nanoindentation techniques: A comparative study for the cases of soft film on hard substrate and hard film on soft substrate

# publications[].label
Mold slag property measurements to characterize CC mold - Shell gap phenomena

# publications[].label
Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution

# publications[].label
Method for constructing an ultra-low-flying-height slider

# publications[].label
A single asperity sliding contact model for molecularly thin lubricant

# publications[].label
High-resolution capacitive load-displacement transducer and its application in nanoindentation and adhesion force measurements

# publications[].label
Boundary and mixed friction in the presence of dynamic normal loads .2. Friction transients (vol 117, pg 261, 1995)

# publications[].label
Lubricity effect of carbon dioxide used as an environmentally friendly refrigerant in air-conditioning and refrigeration compressors

# publications[].label
Static friction of contacting real surfaces in the presence of sub-boundary lubrication

# publications[].label
Wear Modeling of Nanometer Thick Protective Coatings

# publications[].label
TRIBOLOGICAL PERFORMANCE OF POLYMER-BASED COATINGS FOR OIL-LESS PISTON-TYPE COMPRESSOR APPLICATIONS

# publications[].label
Advantages of CO2 compared to R410a refrigerant of tribologically tested Aluminum 390-T6 surfaces

# publications[].label
The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 degrees C

# publications[].label
Static friction experiments and verification of an improved elastic-plastic model including roughness effects

# publications[].label
A phenomenological elevated temperature friction model for viscoelastic polymer coatings based on nanoindentation

# publications[].label
An elastic-plastic hybrid adhesion model for contacting rough surfaces in the presence of molecularly thin lubricant.

# publications[].label
Tribochemistry of inconel 617 during sliding contact at 950 degrees C under helium environment for nuclear reactors

# publications[].label
Structure and mechanical properties of low temperature magnetron sputtered nanocrystalline (nc-)Ti(N,C)/amorphous diamond like carbon (a-C:H) coatings

# publications[].label
Three-DOF dynamic model with lubricant contact for thermal fly-height control nanotechnology

# publications[].label
Stribeck performance of drilling fluids for oil and gas drilling at elevated temperatures

# publications[].label
Investigation of Contact Stiffness and Contact Damping for Magnetic Storage Head-Disk Interfaces

# publications[].label
Microtribodynamics of Pseudo-Contacting Head-Disk Interfaces Intended for $Large{1 {
m Tbit}/{
m in}^{2}}$

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Head-disk interface nanotribology for Tbit/inch(2) recording densities: near-contact and contact recording

# publications[].label
Effect of molecularly thin lubricant on roughness and adhesion of magnetic disks intended for extremely high-density recording

# publications[].label
Tribological Study Comparing PAG and POE Lubricants Used in Air-Conditioning Compressors Under the Presence of CO2

# publications[].label
Optimization of molecularly thin lubricant to improve bearing capacity at the head-disk interface

# publications[].label
Two-dimensional models of boundary and mixed friction at a line contact

# publications[].label
Tribological studies on scuffing due to the influence of carbon dioxide used as a refrigerant in compressors

# publications[].label
Review of dental tribology: Current status and challenges

# publications[].label
Modeling the Effect of Surface Roughness on the Adhesion, Contact and Friction in Micro-Electro-Mechanical Systems (MEMS) Interfaces

# publications[].label
2008 Proceedings of the STLE/ASME International Joint Tribology Conference, IJTC 2008: Welcome from the Chairs

# publications[].label
High temperature nanomechanical and nanotribological behavior of sub-5 nm nitrogen-doped carbon overcoat films

# publications[].label
TRIBOLOGY OF COATINGS FOR USE IN OIL-LESS SWASHPLATE COMPRESSORS

# publications[].label
TRIBOLOGICAL BEHAVIOR OF CrN AND Al-Cr-N COATINGS

# publications[].label
Nanoporous Tungsten for Improved Mechanical Performance and Safety in Nuclear Control Rod Cladding

# publications[].publisher
Institute of Physics, Polish Academy of Sciences

# publications[].label
Enhancements in the tribological performance of environmentally friendly water-based drilling fluids using additives

# publications[].label
Design optimisation of sub-5 nm Head-Disk Interfaces using a two-degree-of-freedom dynamic contact model with friction

# publications[].label
Surface and sub-micron sub-surface evolution of Al390-T6 undergoing tribological testing under submerged lubrication conditions in the presence of CO 2 refrigerant

# publications[].label
Nanomechanical properties of aluminum 390-T6 rough surfaces undergoing tribological testing

# publications[].label
Nanomechanical and nanoscratch behavior of oxides formed on inconel 617 at 950 degrees C

# publications[].label
The effect of surface texturing on thin film reversible adhesive bond strength

# publications[].label
Mechanical strength of pyrolytically stripped and functionalized heat treated vapor grown carbon nanofibers

# publications[].label
Measurement and modeling of normal contact stiffness and contact damping at the meso scale

# publications[].label
Tribological behavior of hafnium diboride thin films

# publications[].label
Deposition and Nanotribological Characterization of Sub-100-nm Thick Protective Ti-Based Coatings for Miniature Applications

# publications[].label
Dynamic Friction Characterization and Modeling of Tripod Constant Velocity Joints

# publications[].label
Tribology of incoloy 800HT for nuclear reactors under helium environment at elevated temperatures

# publications[].label
2-DIMENSIONAL MODELS OF BOUNDARY AND MIXED FRICTION AT A LINE CONTACT

# publications[].label
Tribology review of blended bulk polymers and their coatings for high-load bearing applications

# publications[].label
Design Optimization of Ultra-Low Flying Head-Disk Interfaces Using an Improved Elastic-Plastic Rough Surface Model

# publications[].label
Tribological behaviour of a Si rich multifunctional DLC coating under real environments used in hermetical compressors

# publications[].label
Static friction of contacting real surfaces in the presence of sub-boundary lubrication

# publications[].label
Erratum: Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution [Journal of Tribology, 2010, 132(3), p. 031602]

# publications[].label
Passive Vibration Absorption for Extremely High Density Recording

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Influence of additives on the friction and wear reduction of oil-based drilling fluid

# publications[].label
Physics-based modeling for partial slip behavior of spherical contacts

# publications[].label
APPLICATION OF ELASTIC-PLASTIC STATIC FRICTION MODEL TO ROUGH SURFACE WITH ASYMMETRIC ASPERITY DISTRIBUTION

# publications[].label
Surface and sub-micron sub-surface evolution of Al390-T6 undergoing tribological testing under submerged lubrication conditions in the presence of CO2 refrigerant

# publications[].label
Nanostructure, mechanical and tribological properties of reactive magnetron sputtered TiCx coatings

# publications[].label
Effects of SiO2 content on the nanomechanical properties of CoCrPt-SiO2 granular films.

# publications[].label
Lubricity of environmentally friendly HFO-1234yf refrigerant

# publications[].label
Dynamic contact with friction of an ultra-low flying head-disk interface with thermal protrusion

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Mechanical Properties of Nanoporous Si Anodes using a Continuum Mechanical Model

# publications[].publisher
Institute of Physics, Polish Academy of Sciences

# publications[].label
Two-component mixed friction model for a lubricated line contact

# publications[].label
Tribology of contacting head-disk interfaces

# publications[].label
Adhesive Contact Modeling of Ultra-Low Flying Head-Disk Interfaces With and Without Roughness Effects

# publications[].label
Tribological performance comparing different refrigerant-lubricant systems: The case of environmentally friendly HFO-1234yf refrigerant

# publications[].label
Nanomechanical Behavior of High Gas Barrier Multilayer Thin Films.

# publications[].label
Extreme environment tribological study of advanced bearing polymers for space applications

# publications[].label
Microtribodynamics of Magnetic Storage Hard Disk Drives

# publications[].label
TRIBOLOGICAL PERFORMANCE OF POLYMER COATINGS IN CARBON DIOXIDE REFRIGERANT ENVIRONMENT

# publications[].label
An Improved Model of Asperity Interaction in Normal Contact of Rough Surfaces

# publications[].label
Characterization and Adhesion of Interacting Surfaces in Capacitive RF MEMS Switches Undergoing Cycling

# publications[].label
Nanomechanical and nanotribological behaviors of hafnium boride thin films

# publications[].label
Contact of rough surfaces with asymmetric distribution of asperity heights

# publications[].label
MOLECULARLY THIN LUBRICANT LAYER CONTACT MODEL ACCOUNTING FOR INTERFACIAL SLIP

# publications[].label
Elastic/plastic contact mechanics-based analysis of hard disk drive media damage from slider corner impacts

# publications[].label
Slider for a data storage device with head disc interface for contact starts and stops

# publications[].label
Nanomechanical property and nanowear measurements for sub-10-nm thick films in magnetic storage

# publications[].label
EFFECT OF Cu CONTENT ON THE TRIBOLOGICAL PERFORMANCE OF Cr-N COATINGS AT HIGH TEMPERATURES (840 degrees C)

# publications[].label
3D Mesostructures: Fabrication and Deformation of 3D Multilayered Kirigami Microstructures (Small 11/2018)

# publications[].label
Novel laboratory wear performance test for premium rails

# publications[].label
Effect of Cu Content on the Structure, and Performance of Substoichiometric Cr-N Coatings

# publications[].label
High temperature nanotribology of ultra-thin hydrogenated amorphous carbon coatings

# publications[].label
Shear strength measurements of hafnium diboride thin solid films

# publications[].label
Tribological performance of aromatic thermosetting polyester (ATSP) coatings under cryogenic conditions

# publications[].label
Helium tribology of Inconel 617 subjected to laser peening for high temperature nuclear reactor applications

# publications[].label
Elevated-Temperature and -Pressure Tribology of Drilling Fluids Used in Oil and Gas Extended-Reach-Drilling Applications

# publications[].label
Dynamic adhesive forces in rough contacting bodies including normal and sliding conditions

# publications[].label
Effect of asperity interactions on rough surface elastic contact behavior: Hard film on soft substrate

# publications[].label
Effects of substrate on determination of hardness of thin films by nanoscratch and nanoindentation techniques

# publications[].label
Nanoindentation and nanoscratch of sub-micron polymer nanocomposite films on compliant substrate

# publications[].label
Enabling Selectively Tunable Mechanical Properties of Graphene Oxide/Silk Fibroin/Cellulose Nanocrystal Bionanofilms.

# publications[].label
Adhesive effects on dynamic friction for unlubricated rough planar surfaces

# publications[].label
Modeling of the effect of preferential texturing on the interfacial forces in sub-5 nm ultralow flying head-disk interfaces

# publications[].label
Edge contact protection feature for a disc drive head

# publications[].label
Transient and Steady State Dynamic Vibration Measurements of HDD

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Dynamic microwaviness measurements of super smooth disk media used in magnetic hard disk drives

# publications[].publisher
SPIE, the international society for optics and photonics

# publications[].label
Tip-radius effect in finite element modeling of sub-50 nm shallow nanoindentation

# publications[].label
A PHYSICS-BASED FRETTING MODEL WITH FRICTION AND INTEGRATION TO A SIMPLE DYNAMICAL SYSTEM

# publications[].label
Physics-based modeling for fretting behavior of nominally flat rough surfaces

# publications[].label
Effects of the substrate on the determination of hardness of thin films by the nanoscratch and nanoindentation techniques: A comparative study for the cases of soft film on hard substrate and hard film on soft substrate.

# publications[].label
Lubricant Transfer Model at the Head-Disk Interface in Magnetic Storage Considering Lubricant-Lubricant Interaction

# publications[].label
Sliding contact analysis of functionally graded coating/substrate system

# publications[].label
Tribological investigation of grease used in automotive constant-velocity joints

# publications[].label
Adhesion and pull-off forces for polysilicon MEMS surfaces using the sub-boundary lubrication model

# publications[].label
Effect of the actual environment present in hermetic compressors on the tribological behaviour of a Si-rich multifunctional DLC coating

# publications[].label
Zinc-ion hybrid supercapacitors with ultrahigh areal and gravimetric energy densities and long cycling life

# publications[].label
Micro/Nano Scale Wear Behavior of Pearlitic and Bainitic Rail Steels

# publications[].label
All-solid-state supercapacitors based on yarns of Co3O4-anchored porous carbon nanofibers

# publications[].label
Modeling Bearing and Shear Forces in Molecularly Thin Lubricants

# publications[].label
High temperature and high pressure tribological experiments of advanced polymeric coatings in the presence of drilling mud for oil & gas applications

# publications[].label
Microtribodynamics of pseudo-contacting head-disk interfaces intended for 1 Tbit/in(2)

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Tribological Performance Improvement of Polyamide against Steel Using Polymer Coating

# publications[].label
Static sealing performance of gas mechanical seals including surface roughness and rarefaction effects

# publications[].label
Investigating the effect of fused deposition modelling on the tribology of PETG thermoplastic

# publications[].label
Asymmetric surface roughness measurements and meniscus modeling of polysilicon surface micromachined flaps

# publications[].label
Tribological investigation of cast iron air-conditioning compressor surfaces in CO2 refrigerant

# publications[].label
Disc drive having a suspension limiter for improved shock performance

# publications[].label
Recent advances in electrochemically-efficient materials for zinc-ion hybrid supercapacitors

# publications[].label
&ITIn situ&IT nanomechanical behavior and self-healing response of polymeric multilayer thin films

# publications[].label
Burnishing head with fly height control spacer

# publications[].label
Event timing and shape analysis of vibration bursts from power circuit breakers

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Microstructure, mechanical and tribological properties of reactive magnetron sputtered titanium carbide coatings

# publications[].label
Boundary and mixed friction in the presence of dynamic normal loads .2. Friction transients - Authors' closure

# publications[].label
Adhesive contact based on the Lennard-Jones potential: a correction to the value of the equilibrium distance as used in the potential.

# publications[].label
Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces

# publications[].label
Thermal and Mechanical Properties of Polymer Coatings

# publications[].label
AFM characterization of effects of electrical potential on self-organized metallic nanopore structures

# publications[].label
Tribological studies of a novel high-performance aromatic thermosetting copolyester containing carbon nanotubes for artificial hip joints

# publications[].label
Thermomechanical finite element analysis of slider-disk impact in magnetic storage thin film disks

# publications[].label
AN IMPROVED ELASTIC CONTACT MODEL ACCOUNTING FOR ASPERITY INTERACTION AND BULK SUBSTRATE DEFORMATION

# publications[].label
Advanced polymeric coatings for tilting pad bearings with application in the oil and gas industry

# publications[].label
Predicting Fly-Height Modulation and Contact Forces in Ultra-Low Flying Head-Disk Interfaces Using a Tri-State Switching Dynamic Contact Model

# publications[].label
Nanomechanical and tribological properties of nickel-chromium multilayer coating on Inconel 617

# publications[].label
Tribological Interactions of Advanced Polymeric Coatings

# publications[].label
A model for the static sealing performance of compliant metallic gas seats including surface roughness and rarefaction effects

# publications[].label
Three-body abrasive wear in the presence of inorganic fullerene-like tungsten disulfide and ionic liquid containing alkanolamines and phosphates

# publications[].label
Tribological Performance of Graphene and PTFE Solid Lubricants for Polymer Coatings at Elevated Temperatures

# publications[].label
Adhesive effects on dynamic friction for unlubricated rough planar surfaces

# publications[].label
Polymer coating system for improved tribological performance

# publications[].label
MXene-aromatic thermosetting copolyester nanocomposite as an extremely wear-resistant biocompatible implant material for osteoarthritis applications

# publications[].label
High temperature nanomechanical properties of sub-5nm nitrogen doped diamond-like carbon using nanoindentation and finite element analysis

# publications[].label
Tribochemical changes of alloy 800HT under sliding contact at elevated temperature in impure helium environment

# publications[].label
Morphology-influenced wetting model of nanopore structures

# publications[].label
Tribological characterization of aromatic thermosetting copolyester-PTFE blends in air conditioning compressor environment

# publications[].label
Adhesive contact modeling for sub-5-nm ultralow flying magnetic storage head-disk interfaces including roughness effects

# publications[].label
Adhesive transition from noncontacting to contacting elastic spheres: extension of the Maugis-Dugdale model.

# publications[].label
Meniscus model for noncontacting and contacting sphere-on-flat surfaces including elastic-plastic deformation

# publications[].label
Investigation of contact stiffness and contact damping for magnetic storage head-disk interfaces

# publications[].label
Development of an apparatus to investigate friction characteristics of constant-velocity joints

# publications[].label
Experimental Investigation of Tripod Constant Velocity (CV) Joint Friction

# publications[].label
Wear study of metallic interfaces for air-conditioning compressors under submerged lubrication in the presence of carbon dioxide

# publications[].label
Boundary and mixed friction in the presence of dynamic normal loads: part II - friction transients

# publications[].label
Tribological performance of PTFE-based coatings for air-conditioning compressors

# publications[].label
High temperature sliding wear behavior of Ni alloys under helium environment

# publications[].label
Analytical approximations in modeling contacting rough surfaces

# publications[].label
Analytical approximations in modeling contacting rough surfaces

# publications[].label
Surface roughness characterization of disks intended for extremely high density recording

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Combining and contacting of two rough surfaces with asymmetric distribution of asperity heights

# publications[].label
Dynamic microwaviness measurements of super smooth disk media used in magnetic hard disk drives

# publications[].label
Dynamic tribo-pair of PS400 and DLC for planet Venus application

# publications[].label
Tribology of Hard Protective Coatings Under Realistic Operating Conditions for Use in Oilless Piston-Type and Swash-Plate Compressors

# publications[].label
Adhesion and contact modeling and experiments in microelectromechanical systems including roughness effects

# publications[].label
Nanomechanical properties of sub-10 nm carbon film overcoats using the nanoindentation technique

# publications[].label
Tribological performance of graphite-filled polyimide and PTFE composites in oil-lubricated three-body abrasive conditions

# publications[].label
Dynamic adhesive instability of sub-five nanometer head-disk interfaces

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Analysis of Impact-Induced Head Disk Interface Damage During Op-Shock

# publications[].label
Analytical determination of the surface energy of sub-5 nm head-disk interfaces accounting for multilayer effects

# publications[].label
Ultra high pressure tribometer for testing CO2 refrigerant at chamber pressures up to 2000 psi to simulate compressor conditions

# publications[].label
Dynamic Adhesive Contact with Molecularly Thin Lubricant at the Head-Disk Interface of Hard Disk Drives

# publications[].label
Yield Maps for Single and Bilayer Thin Films Under Scratch

# publications[].label
Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution (vol 132, 031602, 2010)

# publications[].label
Tribological Performances of Polymer-Based Coating Materials Designed for Compressor Applications

# publications[].label
EXPERIMENTAL AND FEA SCRATCH CORRELATION OF MAGNETIC SIGNAL DEGRADATION IN MAGNETIC STORAGE THIN-FILM DISKS

# publications[].label
An Advanced Rough Surface Continuum-Based Contact and Sliding Model in the Presence of Molecularly Thin Lubricant

# publications[].label
Assessment of Elliptical Conformal Hertz Analysis Applied to Constant Velocity Joints

# publications[].label
Determination of hardness from nanoscratch experiments: Corrections for interfacial shear stress and elastic recovery

# publications[].label
Active control of surface forces via nanopore structures

# publications[].label
Boundary and mixed friction in the presence of dynamic normal loads: part I - system model

# publications[].label
Transitions between sticking and slipping at lubricated line contacts

# publications[].label
Tribological investigation of advanced coatings subjected to Venusian environment of 2.4 MPa CO2 pressure and 462 degrees C

# publications[].label
Tri-state dynamic model and adhesive effects on flying-height modulation for ultra-low flying head disk interfaces

# publications[].label
Modeling of the Effect of Preferential Texturing on the Interfacial Forces in Sub-5 nm Ultra-Low Flying Head-Disk Interfaces

# publications[].label
Impact of Ionic Liquid Additives and Inorganic Fullerene-Like Tungsten Disulfide on Friction and Wear under Aqueous Environments.

# publications[].label
Detailed surface roughness characterization of engineering surfaces undergoing tribological testing leading to scuffing

# publications[].label
A microelectromechanical systems (MEMS) force-displacement transducer for sub-5 nm nanoindentation and adhesion measurements.

# publications[].label
Abrasive wear of PEEK and ATSP-based polymer composite coatings under lunar regolith conditions

# publications[].label
Noninvasive vibration diagnostics to detect head-disk contact in hard disk drives

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Finite element simulations of sliding contact of the head-disk interface in magnetic storage with lubricant effects

# publications[].label
APPLICATION OF A 2-DIMENSIONAL MODEL OF CONTINUOUS SLIDING FRICTION TO STICK-SLIP

# publications[].label
Stabilized interface methods for mechanical joints: Physics-based models and variationally consistent embedding

# publications[].label
Dynamic Head-Disk Interface Instabilities With Friction for Light Contact (Surfing) Recording

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Tribological performance of PTFE- and PEEK-based coatings under oil-less compressor conditions

# publications[].label
Comparison of the static friction subboundary lubrication model with experimental measurements on thin-film disks

# publications[].label
High Temperature Mechanics, Friction, Wear and Adhesion of Heat-Assisted Magnetic Recording

# publications[].label
Development of a Lap Joint Fretting Apparatus

# publications[].label
Elastic contact model accounting for both asperity and substrate compliance with application to patterned media

# publications[].label
Zinc-ion hybrid supercapacitors with ultrahigh areal and gravimetric energy densities and long cycling life

# publications[].label
Abrasive Wear Mechanisms of Multi Component Ferrous Alloys Abraded by Soft, Fine Abrasive Particles

# publications[].label
Reversible Bonding of Aromatic Thermosetting Copolyesters for In-Space Assembly

# publications[].label
A correction to the nanoindentation technique for ultrashallow indenting depths

# publications[].label
Fabrication and Mechanical Cycling of Polymer Microscale Architectures for 3D MEMS Sensors

# publications[].label
A phenomenological friction model of tripod constant velocity (CV) joints

# publications[].label
Tribology of High-performance PEEK-, PI-, and ATSP-based Self-lubricating Polymers Up to 300 oC

# publications[].label
Development of Fluorine-Free Tantalum Carbide MXene Hybrid Structure as a Biocompatible Material for Supercapacitor Electrodes.

# publications[].label
Tribological interactions of advanced polymeric coatings with polyalkylene glycol lubricant and r1234yf refrigerant

# publications[].label
Advanced Polymeric Coatings and Their Applications: Green Tribology

# publications[].label
Graphene-Based Aqueous Drilling Muds as Efficient, Durable, and Environmentally Friendly Alternatives for Oil-Based Muds

# publications[].label
A two-component mixed friction model for a lubricated line contact

# publications[].label
Tribology of self-lubricating high performance ATSP, PI, and PEEK-based polymer composites up to 300 degrees C

# publications[].label
Tribological behavior of PS400-related tribopairs for space exploration

# publications[].label
Comparative scuffing performance and chemical analysis of metallic surfaces for air-conditioning compressors in the presence of environmentally friendly CO2 refrigerant

# publications[].label
Edge structure for slider-disc interface and method of manufacture therefore

# publications[].label
2D AlB2 flakes for epitaxial thin film growth

# publications[].label
Tribological Studies of Compressor Surfaces in the Presence of Carbon Dioxide Under Extreme Environmental Pressure Conditions

# publications[].label
Synergistic physical and chemical interactions of selected additives and base oil used in extended reach drilling applications

# publications[].label
Mould slag property measurements to characterize CC mould - Shell gap phenomena

# publications[].label
Surface Roughness Effects on Energy Dissipation in Fretting Contact of Nominally Flat Surfaces

# publications[].label
A finite element correction method for sub-20 nm nanoindentation considering tip bluntness

# publications[].label
Wear of Ni alloys at elevated temperature (950oC) under helium environment for nuclear reactor applications

# publications[].label
A Physics-Based Friction Model and Integration to a Simple Dynamical System

# publications[].label
The significance of tribochemistry on the performance of PTFE-based coatings in CO2 refrigerant environment

# publications[].label
Friction force measurements and modeling in hard disk drives

# publications[].publisher
Institute of Electrical and Electronics Engineers (IEEE)

# publications[].label
Surface reliability of annealed and tempered solar protective glasses: Indentation and scratch behavior

# publications[].label
Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors

# publications[].label
Effect of surface microtexturing on seawater-lubricated contacts under starved and fully-flooded conditions

# publications[].label
Unlubricated Tribological Performance of Aromatic Thermosetting Polyester (ATSP) Coatings Under Different Temperature Conditions

# publications[].label
Analytical and Experimental Elastic-Plastic Impact Analysis of a Magnetic Storage Head-Disk Interface

# publications[].label
Extracting summit roughness parameters from random Gaussian surfaces accounting for asymmetry of the summit heights

# publications[].label
Fully integrated design of a stretchable kirigami-inspired micro-sized zinc-sulfur battery

# publications[].label
Relationship between scratch hardness and yield strength of elastic perfectly plastic materials using finite element analysis

# publications[].label
Tribological Properties of Twin Electron-Beam Evaporated Cr-N and Al-Cr-N Coatings Under Laboratory Sliding and Drill Experiments

# publications[].label
High temperature nanoindentation of Ni alloys under helium environment

# publications[].label
Measuring mechanical properties of fine-wire cross-sections used in medical devices

# publications[].label
Tribology of unfilled and filled polymeric surfaces in refrigerant environment for compressor applications

# publications[].label
Influence of friction and adhesion on the onset of plasticity during normal loading of spherical contacts

# publications[].label
Frictional Behavior of Boundary Lubricated Contacts - Effect of Tribochemical Surface Films

# publications[].label
Erratum: Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part IIFriction Transients [1995, ASME Journal of Tribology, 117(2), pp. 261266]

# publications[].label
Normal impact of sand particles with solar panel glass surfaces

# publications[].label
Tribological study of high bearing blended polymer-based coatings for air-conditioning and refrigeration compressors

# publications[].label
Scuffing of cast iron and Al390-T6 materials used in compressor applications

# publications[].label
Conformal growth of low friction HfBxCy hard coatings

# publications[].label
Effect of hard-disk drive spindle motor vibration on dynamic microwaviness and flying-height modulation

# publications[].label
Effect of substrate material on the tribological performance of PTFE-based polymeric coatings in a CO<inf>2</inf>environment

# publications[].label
Characterization and Adhesion of Interacting Surfaces in Capacitive RF MEMS Switches Undergoing Cycling

# publications[].label
Extracting Summit Roughness Parameters From Random Gaussian Surfaces Accounting for Asymmetry of the Summit Heights

# publications[].label
Efficacy of surface microtexturing in enhancing the tribological performance of polymeric surfaces under starved lubricated conditions

# publications[].label
An improved meniscus surface model for contacting rough surfaces.

# publications[].label
Elevated temperature nanoscratch of Inconel 617 Superalloy

# publications[].label
Modeling adhesive forces for ultra low flying head disk interfaces

# publications[].label
Static friction model for rough surfaces with asymmetric distribution of asperity heights

# publications[].label
Elevated temperature contact creep and friction of nickel-based superalloys using machine learning assisted finite element analysis

# publications[].label
Short Paper: An Initial Investigation of the Correlations Between the Quality of Engineering Assignments and Task-Independent Features

# publications[].label
Shear strength determination using the nanoscratch technique and its application to thin solid films

# publications[].label
Thermomechanical finite element analysis of impact-induced magnetic erasures in magnetic storage thin film media

# publications[].label
Textured Sliders as Means to Reduce Adhesion in Ultra Low Flying Head Disk Interfaces

# publications[].label
A model for adhesive forces in miniature systems

# publications[].label
Investigation of Contact Stiffness and Contact Damping for Magnetic Storage Head-Disk Interfaces

# publications[].label
American Society of Mechanical Engineers, Tribology Division, TRIB: Foreword

# publications[].label
Reconciliation of nanoscratch hardness with nanoindentation hardness including the effects of interface shear stress

# publications[].label
Elevated temperature tribology of Ni alloys under helium environment for nuclear reactor applications

# publications[].label
A new family of low wear, low coefficient of friction polymer blend based on polytetrafluoroethylene and an aromatic thermosetting polyester

# publications[].label
Nanoscratch study of hard HfB2 thin films using experimental and finite element techniques

# publications[].label
An Elastic-Plastic Spherical Contact Model Under Combined Normal and Tangential Loading

# publications[].label
Digital filtering methodology used to reduce scale of measurement effects in roughness parameters for magnetic storage supersmooth hard disks

# publications[].label
A framework for modeling the nanomechanical and nanotribological properties of high temperature HfBxCy coatings

# editorOf[].label
Frontiers of Magnetic Hard Disk Drive Tribology and Technology : Proceedings of the 2002 Magnetic Storage Symposium : Presented at ASME/STLE Joint International Tribology Conference ; October 27-30, 2002, Cancun, Mexico

# editorOf[].label
Proceedings of the Symposium on Nanotribology and Nanotechnology for 1 Tbit/in2

# editorOf[].label
Proceedings of the Symposium on Interface Tribology Towards 100 Gbit/in2

# editorOf[].label
Proceedings of the Symposium on Interface Tribology Towards 100 Gbit/in2 and Beyond Presented at ASME/STLE Jt. International Tribology Conference & Exhibition, October 1-4, 2000, Seattle, Washington

# editorOf[].label
Proceedings of the 2003 Magnetic Storage Symposium Frontiers of Magnetic Hard Disk Drive Tribology and Technology

# researcherOn[].label
Collaborative Research: Adaptive, Multi-Layered Fenestration Elements for Optimum Building Energy Performance and Occupant Comfort

# researcherOn[].awardedBy.label
National Science Foundation - (Arlington, Virginia, United States)

# researcherOn[].label
IUSE/PFE:RED A&I: Soft Wired Teaming for Creating Opportunities to Revolutionize the Preparation of Students (TCORPS) through Building, Testing and Sharing Pedagogical Improvem

# researcherOn[].awardedBy.label
Directorate for Engineering - (Arlington, Virginia, United States)

# researcherOn[].label
RPA-16-10732: High Temperature Tribological Performance of Ni Alloys Under Helium Environment for Very High Temperature Gas Cooled Reactors (VHTRs)

# researcherOn[].awardedBy.label
United States Department of Energy - (Washington D.C., District of Columbia, United States)

# researcherOn[].label
Collaborative Research: AccelNet: An International Network of Networks for Well-being in the Built Environment

# researcherOn[].awardedBy.label
National Science Foundation - (Arlington, Virginia, United States)

# streetAddress
Texas A&M University; Engineering Academic Coordination; 3123 TAMU

# organizations[]
Texas A&M Engineering Experiment Station (TEES)

# schools[]
Texas A&M Engineering Experiment Station (TEES)

# inTheNews[].label
Kirigami-Inspired Electronics Perfect for Pressure Sensing

# inTheNews[].label
20 Minutes With... Dr. Andreas Polycarpou

# inTheNews[].label
Tiny Pop-Up Devices Work Relentlessly, Even Under Extreme Pressure