# overview
My areas of energy expertise are broad and I am open to pursuing research in new energy areas.

# keywords[]
4012 Fluid Mechanics And Thermal Engineering

# keywords[]
4009 Electronics, Sensors And Digital Hardware

# educationAndTraining[].organization.label
Purdue University - (West Lafayette, Indiana, United States)

# educationAndTraining[].organization.label
United States Naval Academy - (Annapolis, Maryland, United States)

# educationAndTraining[].organization.label
University of Arkansas at Little Rock - (Little Rock, Arkansas, United States)

# awardsAndHonors[].label
Louis Thompson Distinguished Undergraduate Teaching Award

# awardsAndHonors[].label
Superior Engineering College Teacher Award

# publications[].label
In-field performance evaluation and economic analysis of residential ground source heat pumps in heating operation

# publications[].label
Impact of external static pressure on residential heating and cooling energy use in hot climates

# publications[].label
Study of bathroom ventilation fan performance trends for years 2005 to 2013-Data analysis of loudness and efficacy

# publications[].label
INTEGRATING MICROCOMPUTER-BASED SPREADSHEETS INTO A HEATING AND COOLING LOAD DESIGN COURSE.

# publications[].label
Lifecycle Analysis of a Single-Family Residential Rainwater Harvesting System in a Subtropical, Metropolitan Environment

# publications[].publisher
American Society of Civil Engineers (ASCE)

# publications[].label
Solubility and viscosity of solutions of HCFC-22 in naphthenic oil and in alkylbenzene at high pressures and temperatures

# publications[].label
EXPERIMENTAL STUDY OF A RESIDENTIAL SOLAR SYSTEM COUPLED TO A RADIANT PANEL CEILING.

# publications[].label
AUGMENTATION OF R-113 IN-TUBE CONDENSATION WITH MICRO-FIN TUBES.

# publications[].label
LOCAL EVAPORATION HEAT TRANSFER IN A SMOOTH TUBE AND A MICRO-FIN TUBE USING REFRIGERANTS 22 AND 113.

# publications[].label
A Method of Efficacy Estimation for ECM Blowers in Residential Gas Furnaces by Using Blower Rotational Speed

# publications[].label
NONDIMENSIONAL STUDY OF HEAT TRANSFER FROM A TWO-REGION SURFACE PROBE.

# publications[].label
Impact of duct flow resistance on residential heating and cooling energy use in systems with PSC and ECM blowers

# publications[].label
Oil quantity measurements in smooth and micro-fin tubes during evaporation and condensation of refrigerant-oil mixtures

# publications[].label
Miscibility comparison for three refrigerant mixtures and four component refrigerants

# publications[].label
COMPUTER SIMULATION OF THE TURBINE FLOW METER ROTOR AS A DRAG BODY.

# publications[].label
TRANSIENT RESPONSE OF A TWO-REGION DECAYING TEMPERATURE SURFACE PROBE.

# publications[].label
An evaluation and comparison of two psychoacoustic loudness models used in low-noise ventilation fan testing

# publications[].label
The Impact of an ECM Blower on the System Performance of a 5-ton Air Conditioner

# publications[].label
An experimental performance analysis of a cold region stationary photovoltaic system

# publications[].label
Shell-side condensation heat transfer of R-134a - part III: comparison with R-12

# publications[].label
EXPERIMENTAL STUDY OF A MULTIPURPOSE COMMERCIAL BUILDING WITH THREE DIFFERENT HEATING SYSTEMS.

# publications[].label
Shell-side condensation heat transfer of R-134a - part I: finned-tube performance

# publications[].label
Evaporation and condensation heat transfer and pressure drop in horizontal, 12.7-mm micro-fin tubes with Refrigerant 22

# publications[].label
Heat Exchangers for the Air-Conditioning and Refrigeration Industry: State-of-the-Art Design and Technology

# publications[].label
An energy and life-cycle cost comparison of residential PSC and ECM blower systems operating at excess pressures due to restrictive ducts

# publications[].label
Heat transfer of R-134a in single-tube spray evaporation including lubricant effects and enhanced surface results

# publications[].label
NUMERICAL STUDY OF HEAT TRANSFER IN A HYDRONIC RADIANT CEILING PANEL.

# publications[].label
Miscibility of seven different lubricants with ten different non-CFC refrigerants

# publications[].label
Residential bathroom exhaust fan energy performance evaluations conducted in a well-instrumented laboratory environment

# publications[].label
OPERATING CHARACTERISTICS OF A HIGH-EFFICIENCY PILOT SCALE CORN DISTILLERS GRAINS DRYER

# publications[].label
Evaporation and Condensation Heat Transfer and Pressure Drop in Horizontal, 12.7-mm Microfin Tubes With Refrigerant 22

# publications[].label
Experimental evaluation of capillary tube-suction line heat exchanger performance with R-152a

# publications[].label
Generalized performance prediction method for adiabatic capillary tubes

# publications[].label
Using solubility data for HFC-134a and ester lubricant mixtures to model an in-tube evaporator or condenser

# publications[].label
In-tube condensation heat transfer of refrigerant mixtures

# publications[].label
EXPERIMENTAL STUDY OF THE TRANSIENT RESPONSE OF A RADIANT PANEL CEILING AND ENCLOSURE.

# publications[].label
Effect of R-123 condensate inundation and vapor shear on enhanced tube geometries

# publications[].label
In-tube heat transfer and pressure drop of R-134a and ester lubricant mixtures in a smooth tube and a micro-fin tube: part II - condensation

# publications[].label
A new approach for drying moist air: The ideal Claridge-Culp-Liu dehumidification process with membrane separation, vacuum compression and sub-atmospheric condensation

# publications[].label
A Comparison of Augmentation Techniques During In-Tube Evaporation of R-113

# publications[].label
PROPERTIES OF OIL-REFRIGERANT LIQUID MIXTURES WITH APPLICATIONS TO OIL CONCENTRATION MEASUREMENT: PART I - THERMOPHYSICAL AND TRANSPORT PROPERTIES.

# publications[].label
An acoustic performance analysis of AC-motor bathroom ventilation fans for a decade-long period, 2005-2015

# publications[].label
PROPERTIES OF OIL-REFRIGERANT LIQUID MIXTURES WITH APPLICATIONS TO OIL CONCENTRATION MEASUREMENT: PART II-ELECTRICAL AND OPTICAL PROPERTIES.

# publications[].label
AN ACTIVE LEARNING APPROACH FOR TEACHING UNDERGRADUATE HEAT TRANSFER

# publications[].label
The impact of operating pressure on residential bathroom exhaust fan performance

# publications[].label
Evaporation heat transfer coefficients for R-22 in micro-fin tubes of different configurations

# publications[].label
Heat transfer coefficients and pressure drops for R-134a and an ester lubricant mixture in a smooth tube and a micro-fin tube

# publications[].label
An alternative method for measuring air-handling unit static pressure following ASHRAE Standard 37: Scenario 1horizontal ducts with elbows (RP-1581)

# publications[].label
Effect of laser beam velocity on cut quality and surface temperature

# publications[].label
Shell-side condensation heat transfer of R-134a - part II: enhanced tube performance

# publications[].label
Theoretical model for predicting adiabatic capillary tube performance with alternative refrigerants

# publications[].label
Life cycle production and costs of a residential solar hot water and grid-connected photovoltaic system in humid subtropical Texas

# publications[].label
An experimental evaluation of duct-mounted relative humidity sensors: Part 2 - Accuracy results

# publications[].label
COMPARISON OF AUGMENTATION TECHNIQUES DURING IN-TUBE EVAPORATION OF R-113.

# publications[].label
Development and use of a mathematical model of an engine-driven heat pump

# publications[].label
TWO-PHASE FLOW MODEL FOR A CAPILLARY TUBE WITH FLASHING AND HEAT EXCHANGE.

# publications[].label
Spray evaporation heat transfer performance of R-123 in tube bundles

# publications[].label
An economic analysis comparison of stationary and dual-axis tracking grid-connected photovoltaic systems in the US Upper Midwest

# publications[].label
A proposed method of test for spoilage of fruits and vegetables

# publications[].label
TRANSIENT RESPONSE OF A TWO-REGION DECAYING TEMPERATURE SURFACE PROBE.

# publications[].label
ANALYSIS OF CHOKED FLOW CONDITIONS IN A CAPILLARY TUBE-SUCTION LINE HEAT EXCHANGER.

# publications[].label
An economic survey of hydrogen production from conventional and alternative energy sources

# publications[].label
A comparative study of shell-side condensation on integral-fin tubes with R-114 and R-236ea

# publications[].label
An Experimental Performance Evaluation of a Cold-Region Photovoltaic System With Tracking

# publications[].label
Effects of lubricant miscibility and viscosity on the performance of an R-134a refrigerating system

# publications[].label
Gasoline Particulate Filter Substrate Heterogeneity Effects on Its Performance

# publications[].label
A novel concept of passive shutdown heat removal in advanced nuclear reactorsApplications to PRISM and MHTGR

# publications[].label
An experimental evaluation of capillary tube-suction line heat exchanger performance with refrigerant HFC-134A

# publications[].label
COMPARISON OF THREE MOIST AIR PROPERTY FORMULATIONS FOR COMPUTER APPLICATIONS.

# publications[].label
An Investigation of a Residential Solar System Coupled to a Radiant Panel Ceiling

# publications[].label
COMPUTER SIMULATION OF A CROSS-FLOW HEAT EXCHANGER OPERATING IN A MOIST AIR ENVIRONMENT.

# publications[].label
Experimental performance evaluations and empirical model developments of residential furnace blowers with PSC and ECM motors

# publications[].label
A computer simulation of the turbine flow meter rotor as a drag body.

# publications[].label
The effect of high ambient temperature on the performance of an R410a air conditioner

# publications[].label
An experimental evaluation of duct-mounted relative humidity sensors: Part 3 - Repeatability, hysteresis, and linearity results

# publications[].label
Effect of lubricant on spray evaporation heat transfer performance of R-134a and R-22 in tube bundles

# publications[].label
Method to account for energy conservation measure interactions

# publications[].label
In-tube heat transfer and pressure drop of R-134a and ester lubricant mixtures in a smooth tube and a micro-fin tube: part I - evaporation

# publications[].label
Analytical investigation of a novel gas refrigeration cycle with a constant volume flow-through regenerator

# publications[].label
An experimental investigation of response times for duct-mounted relative humidity transmitters

# publications[].label
A comparative study of shell-side condensation on integral-fin tubes with R-114 and R-236ea

# publications[].label
Transient response of an air-to-water cross-flow heat exchanger

# publications[].label
A Generalized Performance Prediction Method for Adiabatic Capillary Tubes

# publications[].label
THERMAL ANALYSIS OF AN INSTALLED GAS FIRED RADIANT HEATER.

# publications[].label
SEMI-ANALYTICAL FORMULATION FOR HEAT TRANSFER FROM STRUCTURES WITH EMBEDDED TUBES.

# publications[].label
Effects of Operating Temperature on the Heat Transfer Characteristics of Photovoltaic Systems in the Upper Midwest

# publications[].label
Evaluation of the ASHRAE method for predicting capillary tube-suction line heat exchanger performance

# publications[].label
An experimental comparison of evaporation and condensation heat transfer coefficients for HFC-134a and CFC-12

# publications[].label
COMPARISON OF IN-TUBE EVAPORATION OF REFRIGERANT 113 IN ELECTRICALLY HEATED AND FLUID HEATED SMOOTH AND INNER-FIN TUBES.

# publications[].label
Performance of micro-fin tubes with refrigerant-22 and oil mixtures

# publications[].label
SURVEY OF REFRIGERANT HEAT TRANSFER AND PRESSURE DROP EMPHASIZING OIL EFFECTS AND IN-TUBE AUGMENTATION.

# publications[].label
The impact of operating pressure on residential bathroom exhaust fan performance

# publications[].label
Comparison of the heat transfer and pressure drop performance of R-134a-lubricant mixtures in different diameter smooth tubes and micro-fin tubes

# publications[].label
Effects of nozzle height and orifice size on spray evaporation heat transfer performance for a low-finned, triangular-pitch tube bundle with R-134A

# publications[].label
Operating characteristics of a high-efficiency pilot scale corn distillers grain dryer

# publications[].label
Throat Unit Collector Modeling of Gasoline Particulate Filter Performance

# publications[].label
Heat transfer and pressure drop during evaporation and condensation of R22 in horizontal micro-fin tubes

# publications[].label
Life cycle costs and field performance studies of a domestic rainwater harvesting application in a humid, sub-tropical, metropolitan environment

# publications[].publisher
American Society of Civil Engineers (ASCE)

# publications[].label
Effect of noncondensable gas on the condensation of R-123 on enhanced tube geometries

# publications[].label
AUGMENTATION OF R-113 IN-TUBE EVAPORATION WITH MICRO-FIN TUBES.

# publications[].label
EVAPORATION OF REFRIGERANT 113 FLOWING INSIDE SMOOTH TUBES.

# publications[].label
Effect of R-134a inundation on enhanced tube geometries

# publications[].label
INTERACTIVE COMPUTER PROGRAM FOR ANALYZING REFRIGERATION CYCLES IN HVAC COURSES.

# publications[].label
An experimental evaluation of duct-mounted relative humidity sensors: Part 1, test and evaluation procedures

# publications[].label
Uncertainty and signal-to-noise ratio for unsteady background noise

# publications[].publisher
Institute of Noise Control Engineering (INCE)

# publications[].label
Spray evaporation heat transfer of R-134A on plain tubes

# publications[].label
Gravity-assisted heat pipes using micro-fin tubes for applications in air-to-air heat exchangers

# publications[].label
EXPERIMENTAL STUDY OF A GAS-FIRED RADIANT HEATER AND ENCLOSURE.

# publications[].label
Effects of surface enhancement, film-feed supply rate, and bundle geometry on spray evaporation heat transfer performance

# publications[].label
Measurement of solubility and viscosity of oil/refrigerant mixtures at high pressures and temperatures. Test facility and initial results for R-22/naphthenic oil mixtures

# researcherOn[].awardedBy.label
United States Department of Energy - (Washington D.C., District of Columbia, United States)

# streetAddress
Texas A&M University; Mechanical Engineering; 3123 TAMU

# etdChairOf[].label
Collins, Ryan Steven (2016-12). Range Hood Capture Efficiency Design Modeling. Master's Thesis.

# etdChairOf[].label
Kamranzadeh, Vahideh (2011-12). An Energy Analysis Of A Large, Multipurpose Educational Building In A Hot Climate. Master's Thesis.

# etdChairOf[].label
Hardy, Mark James (2010-12). Reducing Air Compressor Work by Using Inlet Air Cooling and Dehumidification. Master's Thesis.

# etdChairOf[].label
Chen, Meinan (2015-05). Performance Assessment of a Typical Range Hood Ventilation System. Master's Thesis.

# etdChairOf[].label
Daugherty, Matthew (2014-05). Flat Oval Spiral Duct Deflection. Master's Thesis.

# etdChairOf[].label
Escatel, Daniel Santiago (2011-05). An Experimental Study and Analysis on Vent Cap Performance. Master's Thesis.

# etdChairOf[].label
Nagy, Paul (2014-12). Fluctuations in ASHRAE Refrigerant Physical Properties and the Effect on Single and Two Phase Flow. Master's Thesis.

# etdChairOf[].label
Young, James Tirtowijoyo (2016-08). A Compressed Air System Model for Analysis and Design. Master's Thesis.

# etdChairOf[].label
Sweeney, James F (2015-12). The Evaluation of the Sustainability of a Modern Residential Dwelling in a Humid Subtropical Environment. Doctoral Dissertation.

# etdChairOf[].label
Wheeler, Grant Benson (2013-08). An Investigation of Alternative Methods for Measuring Static Pressure of Unitary Air Conditioners and Heat Pumps. Master's Thesis.

# etdChairOf[].label
Rees, Jennifer Anne (2013-05). Energy Recovery Ventilator Membrane Efficiency Testing. Master's Thesis.

# etdChairOf[].label
Tanskyi, Oleksandr (2015-08). Zeolite Membrane Water Vapor Separation for Building Air-Conditioning and Ventilation Systems. Doctoral Dissertation.

# etdChairOf[].label
Yin, Peng (2015-08). Duct Design Impacts on Energy Consumptions and Life Cycle Costs for Residential Central Heating and Cooling Systems. Doctoral Dissertation.

# etdChairOf[].label
Assuncao, Felipe Leite (2016-08). A Numerical Performance Analysis of Heat Recovery Ventilators with Staggered-Baffle Channels. Master's Thesis.

# etdChairOf[].label
Gangisetti, Kavita (2010-12). Prediction of Room Air Diffusion for Reduced Diffuser Flow Rates. Master's Thesis.

# etdChairOf[].label
Mero, Claire Renee (2012-05). Design and Construction of a Guarded Hot Box Facility for Evaluating the Thermal Performance of Building Wall Materials. Master's Thesis.

# etdChairOf[].label
Tanskyi, Oleksandr (2010-12). Analysis of Innovative HVAC System Technologies and Their Application for Office Buildings in Hot and Humid Climates. Master's Thesis.

# etdChairOf[].label
Ravi, Sankaranarayana (2010-12). Performance Evaluation of Reverberant Chamber   Background Noise Levels. Master's Thesis.

# etdChairOf[].label
Almeida, Agnes (2014-12). Low Delta-T Syndrome Diagnosis and Correction for Chilled Water Plants. Master's Thesis.

# etdChairOf[].label
Wang, Wei (2011-08). Optimization of VAV AHU Terminal Box Minimum Airflow. Master's Thesis.

# etdChairOf[].label
Burgess, Tiffany (2015-08). The Effects of External Temperature on the Energy Consumption of Household Refrigerator-Freezers and Freezers. Master's Thesis.

# etdChairOf[].label
Sakurai, Yasuko (2016-09). Energy Consumption and Financial Impact from Capital Projects at Utilities & Energy Services, Texas A&M University. Doctoral Dissertation.

# etdChairOf[].label
Schaff, Francesco Nima (2014-08). Design and Development of a Vacuum Dehumidification Test Facility. Master's Thesis.

# etdChairOf[].label
Zhang, Yupeng (2014-12). A Prediction Model for Adiabatic and Diabatic Capillary Tubes with Alternative Refrigerants. Master's Thesis.

# etdChairOf[].label
Elliston, Sean David (2012-05). Acoustic Analysis of R.E.E.L. Semi-Reveberant Sound Chamber. Master's Thesis.