# keywords[]
30 Agricultural, Veterinary And Food Sciences

# keywords[]
4019 Resources Engineering And Extractive Metallurgy

# keywords[]
Sputter Deposited Single-layered And Multilayered Cu /mo Films

# keywords[]
30 Agricultural, Veterinary And Food Sciences

# educationAndTraining[].organization.label
Stanford University - (Stanford, California, United States)

# publications[].label
Tissue-Level Mechanical Properties of Bone Contributing to Fracture Risk.

# publications[].label
Rapid structural and chemical characterization of ternary phase diagrams using synchrotron radiation

# publications[].label
Variation of young's modulus and hardness in human lumbar vertebrae measured by nanoindentation

# publications[].label
Microstructures and mechanical properties of thin films of aluminum oxide

# publications[].label
Surface characterization of an ultra-soft contact lens material using an atomic force microscopy nanoindentation method.

# publications[].label
On the Measurement of Power Law Creep Parameters from Instrumented Indentation

# publications[].label
Plastic instability in amorphous selenium near its glass transition temperature

# publications[].label
Matrix Properties of Textile Reinforced Ceramic Matrix Composites Measured by Nanoindentation

# publications[].label
Increasing initial yield stress at small length scales

# publications[].label
Measurement of residual stresses by load and depth sensing spherical indentation

# publications[].label
Preparation of ternary alloy libraries for high-throughput screening of material properties by means of thick film deposition and interdiffusion: Benefits and limitations

# publications[].label
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy

# publications[].label
Time dependent deformation during indentation testing

# publications[].label
An experimental evaluation of the constant  relating the contact stiffness to the contact area in nanoindentation

# publications[].label
On the effective load during nanoindentation creep testing with continuous stiffness measurement (CSM)

# publications[].label
TECHNIQUE FOR PRODUCING ICE FROM NaCl BRINE FOR STUDYING FUNDAMENTAL DEFORMATION BEHAVIOR.

# publications[].label
Lattice Rotation Patterns and Strain Gradient Effects in Face-Centered-Cubic Single Crystals Under Spherical Indentation

# publications[].label
A review of directionally solidified intermetallic composites for high-temperature structural applications

# publications[].label
Determination of contact area during small-scale friction experiments by means of continuous stiffness measurements

# publications[].label
Effective Poissons ratio from combined normal and lateral contacts of single crystals

# publications[].label
Nanoindentation creep of quartz, with implications for rate- and state-variable friction laws relevant to earthquake mechanics

# publications[].label
Geometric effects on dislocation nucleation in strained electronics

# publications[].label
Pile-up behavior of spherical indentations in engineering materials

# publications[].label
Creep of alpha brass containing a liquid grain boundary phase

# publications[].label
Hysteresis and discontinuity in the indentation load-displacement behavior of silicon

# publications[].label
Instrumented indentation testing in materials research and development

# publications[].label
Understanding and modeling plasticity error during nanoindentation with continuous stiffness measurement

# publications[].label
Indenter geometry effects on the measurement of mechanical properties by nanoindentation with sharp indenters

# publications[].label
A combinatorial thin film sputtering approach for synthesizing and characterizing ternary ZrCuAl metallic glasses

# publications[].label
Metastable phase evolution and grain growth in annealed nanocrystalline CrFeNi films

# publications[].label
Characterization of Nanoindentations in Silicon by Cross-sectional TEM

# publications[].label
A comparison of the orowan stress with the threshold stress for creep for Ni20Cr2ThO2 single crystals

# publications[].label
Cohesive interface simulations of indentation cracking as a fracture toughness measurement method for brittle materials

# publications[].label
Nanoindentation of soft films on hard substrates: Experiments and finite element simulations

# publications[].label
Extraction of flow properties of single-crystal silicon carbide by nanoindentation and finite-element simulation

# publications[].label
Micro-Raman mapping and analysis of indentation-induced phase transformations in germanium

# publications[].label
An evaluation of the advantages and limitations in simulating indentation cracking with cohesive zone finite elements

# publications[].label
Extraction of Anisotropic Mechanical Properties From Nanoindentation of SiC-6H Single Crystals

# publications[].label
Effects of indenter angle on micro-scale fracture toughness measurement by pillar splitting

# publications[].label
Effects of brine content on the strength of frozen Ottawa sand

# publications[].label
Nanoindentation of juvenile and mature loblolly pine (Pinus taeda L.) wood fibers as affected by thermomechanical refining pressure

# publications[].label
Tuning the deformation mechanisms of boron carbide via silicon doping.

# publications[].publisher
American Association for the Advancement of Science (AAAS)

# publications[].label
Measurement of residual stress by load and depth sensing indentation with spherical indenters

# publications[].label
Effects of residual stress on the measurement of hardness and elastic modulus using nanoindentation

# publications[].label
On the evaluation of stresses in coated materials during nanoindentation with sharp indenters

# publications[].label
Comments on the paper Does the subgrain size influence the rate of creep?

# publications[].label
The correlation of indentation size effect experiments with pyramidal and spherical indenters

# publications[].label
Effects of pre-strain on the compressive stressstrain response of Mo-alloy single-crystal micropillars

# publications[].label
Strain-rate dependent deformation mechanisms in single-layered Cu, Mo, and multilayer Cu/Mo thin films

# publications[].label
Quantitative insights into the dislocation source behavior of twin boundaries suggest a new dislocation source mechanism

# publications[].label
Characterization of dislocation structures and deformation mechanisms in as-grown and deformed directionally solidified NiAlMo composites

# publications[].label
Relationship between ultrastructure and the nanoindentation properties of intramuscular herring bones.

# publications[].label
The Role of Eta Phase Formation on the Creep Strength and Ductility of INCONEL Alloy 740 at 1023 K (750 C)

# publications[].label
Effects of focused ion beam milling on the nanomechanical behavior of a molybdenum-alloy single crystal

# publications[].label
Deformation microstructure under microindents in single-crystal Cu using three-dimensional x-ray structural microscopy

# publications[].label
A different type of indentation size effect

# publications[].label
A numerical study of cavity growth controlled by surface diffusion

# publications[].label
The anisotropic Young's modulus of equine secondary osteones and interstitial bone determined by nanoindentation.

# publications[].label
Multilayers of amorphous carbon prepared by cathodic arc deposition

# publications[].label
New evidence for a pressure-induced phase transformation during the indentation of silicon

# publications[].label
Effects of anisotropy on elastic moduli measured by nanoindentation in human tibial cortical bone.

# publications[].label
Using indentation and intra-vascular ultrasound to measure arterial response

# publications[].label
An experimental assessment of methods for mitigating plasticity error during nanoindentation with continuous stiffness measurement

# publications[].label
On the correlation between the constants in the Dorn equation for creep

# publications[].label
Nanomechanical testing in materials research and development III

# publications[].label
Fundamentals and applications of instrumented indentation in multidisciplinary research

# publications[].label
Thermal aging effects on the microstructure and short-term oxidation behavior of a cast Ni3Al alloy

# publications[].label
High strain rate nanoindentation testing: Recent advancements, challenges and opportunities

# publications[].label
Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys

# publications[].label
White microbeam diffraction from distorted crystals

# publications[].label
On the evaluation of stresses during nanoindentation with sharp indenters

# publications[].label
Creep behavior of the solid acid fuel cell material CsHSO4

# publications[].label
Elastic and Plastic Characteristics of Sodium Metal

# publications[].label
The correlation of the indentation size effect measured with indenters of various shapes

# publications[].label
Measurement of Thin Film Mechanical Properties Using Nanoindentation

# publications[].label
Effects of wetting on the compression creep behaviour of metals containing low melting intergranular phases

# publications[].label
Effects of Solidification Parameters on Lamellar Microstructures of Near Eutectic Cr-Cr3Si Alloys

# publications[].label
Effects of composition on lamellar microstructures of near-eutectic CrCr3Si alloys

# publications[].label
Influences of stress on the measurement of mechanical properties using nanoindentation: Part II. Finite element simulations

# publications[].label
Influences of stress on the measurement of mechanical properties using nanoindentation: Part I. Experimental studies in an aluminum alloy

# publications[].label
Discussion on Interfacial Residual Stress Analysis of Thermal Spray Coatings by Miniature Ring-Core Cutting Combined with DIC Method by J.G. Zhu et al., Experimental Mechanics DOI:10.1007/s11340-012-9640-2

# publications[].label
Hardness, elastic modulus, and structure of very hard carbon films produced by cathodicarc deposition with substrate pulse biasing

# publications[].label
Effects of focused ion beam milling on the compressive behavior of directionally solidified micropillars and the nanoindentation response of an electropolished surface

# publications[].label
On the measurement of creep by nanoindentation with continuous stiffness techniques

# publications[].label
Current trends in nanomechanical testing research

# publications[].label
Effect of thermo-mechanical refining pressure on the properties of wood fibers as measured by nanoindentation and atomic force microscopy

# publications[].label
Depth-resolved residual stress analysis of thin coatings by a new FIBDIC method

# publications[].label
Stiffness of frictional contact of dissimilar elastic solids

# publications[].label
Critical issues in making small-depth mechanical property measurements by nanoindentation with continuous stiffness measurement

# publications[].label
Differential effects between the loss of MMP-2 and MMP-9 on structural and tissue-level properties of bone.

# publications[].label
Applicability of Sneddon relationships to the real case of a rigid cone penetrating an infinite half space

# publications[].label
Microstructure and thermal stability of lamellar Cr-silicides

# publications[].label
Comments on 'Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur'.

# publications[].label
A critical examination of the fundamental relations used in the analysis of nanoindentation data

# publications[].label
The mechanical behavior of silicon during small-scale indentation

# publications[].label
Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation.

# publications[].label
Mechanical properties and microstructures of metal/ceramic microlaminates: Part II. A Mo/Al2O3 system

# publications[].label
A Technique for Producing Ice From NaCl Brine for Studying Fundamental Deformation Behavior

# publications[].label
The effect of indenter angle on the microindentation hardness

# publications[].label
Surface mechanical properties of C implanted Ni

# publications[].label
Elastic constants of single crystal Cr3Si and CrCr3Si lamellar eutectic composites: a comparison of ultrasonic and nanoindentation measurements

# publications[].label
On the measurement of hardness at high strain rates by nanoindentation impact testing

# publications[].label
Constitutive modeling of indentation cracking in fused silica

# publications[].label
A method for making substrate-independent hardness measurements of soft metallic films on hard substrates by nanoindentation

# publications[].label
Characterization of deformation anisotropies in an -Ti alloy by nanoindentation and electron microscopy

# publications[].label
PVD synthesis and high-throughput property characterization of NiFeCr alloy libraries

# publications[].label
Single versus successive pop-in modes in nanoindentation tests of single crystals

# publications[].label
On the measurement of yield strength by spherical indentation

# publications[].label
Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques

# publications[].label
Correlations between osteocalcin content, degree of mineralization, and mechanical properties of C. carpio rib bone.

# publications[].label
Nanoindentation of silver-relations between hardness and dislocation structure

# publications[].label
Experimental investigations of the Sneddon solution and an improved solution for the analysis of nanoindentation data

# publications[].label
Nanoindentation of biodegradable cellulose diacetategraftpoly(Llactide) copolymers: Effect of molecular composition and thermal aging on mechanical properties

# publications[].label
Optical interferometric determination of in-plane residual stresses in SiO<inf>2</inf> films on silicon substrates

# publications[].label
Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation

# publications[].label
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures

# publications[].label
Influences of elasticity on the measurement of power law creep parameters by nanoindentation

# publications[].label
Cross-sectional TEM studies of indentation-induced phase transformations in Si: Indenter angle effects

# publications[].label
In-situ tensile testing of single-crystal molybdenum-alloy fibers with various dislocation densities in a scanning electron microscope

# publications[].label
Electrical resistance of metallic contacts on silicon and germanium during indentation

# publications[].label
Recent advances in small-scale mechanical property measurement by nanoindentation

# publications[].label
Critical issues in measuring the mechanical properties of hard films on soft substrates by nanoindentation techniques

# publications[].label
A nano-indentation model for spherical indenters

# publications[].label
An investigation of the relationship between position within coater and pyrolytic carbon characteristics using nanoindentation

# publications[].label
Multidimensional contact moduli of elastically anisotropic solids

# publications[].label
Mechanical and morphological variation of the human lumbar vertebral cortical and trabecular bone.

# publications[].label
Mechanical properties of amorphous hard carbon films prepared by cathodic arc deposition

# publications[].label
Nanoindentation and the mechanical characterization of viscoelastic solids

# publications[].label
Mechanical characterization of LiPON films using nanoindentation

# publications[].label
The indentation size effect in the spherical indentation of iridium: A study via the conventional theory of mechanism-based strain gradient plasticity

# publications[].label
Further observations on creep enhanced by a liquid phase in porous potassium chloride

# publications[].label
Characterization of power-law creep in the solid-acid CsHSO4 via nanoindentation

# publications[].label
Influence of indenter angle on cracking in Si and Ge during nanoindentation

# publications[].label
Testing and Analysis of Full-Scale Creep-Rupture Experiments on Inconel Alloy 740 Cold-Formed Tubing

# publications[].label
On the measurement of stress-strain curves by spherical indentation

# publications[].label
Measuring the constitutive behavior of viscoelastic solids in the time and frequency domain using flat punch nanoindentation

# publications[].label
A numerical approach to spherical indentation techniques for material property evaluation

# publications[].label
Exploring the origins of the indentation size effect at submicron scales.

# publications[].publisher
Proceedings of the National Academy of Sciences

# publications[].label
Variations in the individual thick lamellar properties within osteons by nanoindentation.

# publications[].label
Fabrication and characterization of aluminum-magnetic shape memory alloy composites

# publications[].label
Effects of liquid phases on intrinsic interfacial sliding of alkali halide crystals

# publications[].label
Effects of drying on the mechanical properties of bovine femur measured by nanoindentation.

# publications[].label
Creep of a thermally stable nanocrystalline nickel tungsten alloy as measured by high temperature nanoindentation

# publications[].label
Finite element simulation of spherical indentation in the elasticplastic transition

# publications[].label
Nanoindentation in materials research: Past, present, and future

# publications[].label
Indentation-induced phase transformations in silicon: influences of load, rate and indenter angle on the transformation behavior

# publications[].label
Creep substructure formation in sodium chloride single crystals in the power law and exponential creep regimes

# publications[].label
Direct observation of partial interface slip in micrometre-scale single asperity contacts

# publications[].label
Measurement of mechanical properties by ultra-low load indentation

# publications[].label
A critical examination of the Berkovich vs. conical indentation based on 3D finite element calculation

# publications[].label
Instrumentation of a conventional hardness tester for load-displacement measurement during indentation

# publications[].label
A comparison of 3D finite element simulations for Berkovich and conical indentation of fused silica

# publications[].label
Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges

# publications[].label
Investigating the compressive strength and strain localization of nanotwinned nickel alloys

# publications[].label
Assessment of new relation for the elastic compliance of a film-substrate system

# publications[].label
A critique of the ayres-stein method of predicting cleavage planes in metals

# publications[].label
Directional solidification and microstructures of near-eutectic CrCr3Si alloys

# publications[].label
Effective elastic modulus of film-on-substrate systems under normal and tangential contact

# publications[].label
Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates

# publications[].label
The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations

# publications[].label
Wetting and penetration of KCl and NaCl grain boundaries by water and methanol

# publications[].label
Corrections to the stiffness relationship in 3-sided and conical indentation problems

# publications[].label
An improved relation for the effective elastic compliance of a film/substrate system during indentation by a flat cylindrical punch

# publications[].label
Size effects and stochastic behavior of nanoindentation pop in.

# publications[].label
Strength differences arising from homogeneous versus heterogeneous dislocation nucleation

# publications[].label
Cracking and phase transformation in silicon during nanoindentation

# publications[].label
EFFECTS OF TEMPERATURE, STRESS AND SALINITY ON THE CREEP OF FROZEN SALINE SOIL.

# publications[].label
EVALUATION OF NEW TECHNIQUE TO ESTIMATE YIELD STRESS IN BRITTLE MATERIALS VIA SPHERICAL INDENTATION TESTING

# publications[].label
Raman and mechanical properties correlate at whole bone- and tissue-levels in a genetic mouse model.

# publications[].label
Effects of adhesion on the measurement of thin film mechanical properties by nanoindentation

# publications[].label
Influences of composition and grain size on creeprupture behavior of Inconel alloy 740

# publications[].label
Using indentation and intra-vascular ultrasound to measure arterial response

# publications[].label
Elastic Anisotropy of Silicon Nitride Whiskers

# publications[].label
A compilation and analysis of data for the stress dependence of the subgrain size

# publications[].label
Similarity relationships in creep contacts and applications in nanoindentation tests

# publications[].label
The contribution of plastic sink-in to the static friction of single asperity microscopic contacts

# publications[].label
Thermal-expansion behavior of a directionally solidified NiAlMo composite investigated by neutron diffraction and dilatometry

# publications[].label
Effects of crystal orientation on the indentation creep of beta-tin

# publications[].label
Nanoindentation of wood cell walls: Continuous stiffness and hardness measurements

# publications[].label
Long-term oxidation of an as-cast Ni3Al alloy at 900 C and 1100 C

# publications[].label
Direct Observation and Analysis of Indentation Cracking in Glasses and Ceramics

# publications[].label
A comparison of the creep behavior of saline ice and frozen saline Ottawa sand at 8C

# publications[].label
Application of the methods of dislocation dynamics to describe plastic flow in both b.c.c. and f.c.c. metals

# publications[].label
Influence of indenter tip geometry on elastic deformation during nanoindentation.

# publications[].label
The Compelling Case for Indentation as a Functional Exploratory and Characterization Tool

# publications[].label
Compressive creep of copper containing a liquid bismuth intergranular phase

# publications[].label
An experimental evaluation of the constant  relating the contact stiffness to the contact area in nanoindentation

# publications[].label
Explanation for the shape of nanoindentation unloading curves based on finite element simulation

# publications[].label
Two modes of screw dislocation glide in fcc single-phase concentrated alloys

# publications[].label
Mechanical properties of blended single-wall carbon nanotube composites

# publications[].label
Nitrogen impurity gettering in oxide dispersion ductilized chromium

# publications[].label
Growth and nanomechanical characterization of nanoscale 3D architectures grown via focused electron beam induced deposition.

# publications[].label
Mechanical properties and creep behavior of lyocell fibers by nanoindentation and nano-tensile testing

# publications[].label
Measuring the elastic modulus and residual stress of freestanding thin films using nanoindentation techniques

# publications[].label
Microstructures and mechanical properties of VV 3 Si eutectic composites

# publications[].label
Preparation of ternary alloy libraries by means of thick film deposition and interdiffusion: Structure and mechanical properties

# publications[].label
Cross-sectional TEM studies of indentation-induced phase transformations in Si: Indenter angle effects

# publications[].label
The elastic properties of trabecular and cortical bone tissues are similar: results from two microscopic measurement techniques.

# publications[].label
X-ray microbeam investigation of deformation microstructure in microindented Cu

# publications[].label
Incipient plasticity and deformation mechanisms in single-crystal Mg during spherical nanoindentation

# publications[].label
Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis

# publications[].label
Nanoindentation hardness of soft films on hard substrates: Effects of the substrate

# publications[].label
Mechanical properties of metallic lithium: from nano to bulk scales

# publications[].label
Microstructure and Oxidation of a Cast Nickel Aluminide Alloy

# publications[].label
Effect of Temperature on the Formation of Creep Substructure in Sodium Chloride Single Crystals

# publications[].label
Effect of aqueous-based mechanical polishing on the nanoindentation response of borosilicate glasses

# publications[].label
The grain size dependence of creep enhanced by a liquid phase in porous potassium chloride

# publications[].label
On the elastic moduli of nanocrystalline Fe, Cu, Ni, and CuNi alloys prepared by mechanical milling/alloying

# publications[].label
Anisotropic properties of human tibial cortical bone as measured by nanoindentation.

# publications[].label
A model of size effects in nano-indentation

# publications[].label
Nanoindentation of soft films on hard substrates: the importance of pile-up

# publications[].label
Hard boronsuboxide-based films deposited in a sputter-sourced, high-density plasma deposition system

# publications[].label
Micro-Raman mapping and analysis of indentation-induced phase transformations in germanium

# publications[].label
Compressive strengths of molybdenum alloy micro-pillars prepared using a new technique

# publications[].label
Measurement of hardness and elastic modulus by load and depth sensing indentation: Improvements to the technique based on continuous stiffness measurement

# publications[].label
Deformation of an extruded nickel beryllide between room temperature and 820 C

# publications[].label
Nanoindentation with spherical indenters: finite element studies of deformation in the elasticplastic transition regime

# publications[].label
Some observations on the relation between dislocation substructure and power law breakdown in creep

# publications[].label
Synthesis and characterization of metal carbides for nanoindentation tip applications

# publications[].label
The Effects of Temperature, Stress and Salinity on the Creep of Frozen Saline Soil

# publications[].label
Nanoindentation as a tool for understanding nano-mechanical properties of wood cell wall and biocomposites

# publications[].label
Fabrication and characterization of aluminum - magnetic shape memory alloy composites

# publications[].label
Cracking during nanoindentation and its use in the measurement of fracture toughness

# publications[].label
Influences of surface preparation on nanoindentation pop-in in single-crystal Mo

# publications[].label
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology

# publications[].label
On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation

# publications[].label
Indentation of elastically anisotropic half-spaces by cones and parabolae of revolution

# publications[].label
Evidence for nanoindentation-induced phase transformations in germanium

# publications[].label
Indentation size effect in spherical and pyramidal indentations

# publications[].label
Nanoscale incipient asperity sliding and interface micro-slip assessed by the measurement of tangential contact stiffness

# publications[].label
Deformation microstructure under nanoindentations in Cu using 3D x-ray structural microscopy

# publications[].label
Microstructural elasticity and regional heterogeneity in human femoral bone of various ages examined by nano-indentation.

# publications[].label
A simple stochastic model for yielding in specimens with limited number of dislocations

# publications[].label
Finite element studies of the influence of pile-up on the analysis of nanoindentation data

# publications[].label
The distribution of osteocalcin, degree of mineralization, and mechanical properties along the length of Cyprinus carpio rib bone.

# publications[].label
Elastic properties of microstructural components of human bone tissue as measured by nanoindentation.

# publications[].label
Long-term oxidation of an As-Cast Ni3Al alloy at 900 C and 1100 C

# publications[].label
Nanoscale Roughness of Natural Fault Surfaces Controlled by Scale-Dependent Yield Strength

# publications[].label
On the measurement of stress-strain curves by spherical indentation

# publications[].label
On the stability of the creep substructure in NaCl single crystals

# publications[].label
A methodology for the calibration of spherical indenters

# publications[].label
Decoupling indentation size and strain rate effects during nanoindentation: A case study in tungsten

# publications[].label
Increased tissue-level storage modulus and hardness with age in male cortical bone and its association with decreased fracture toughness.

# publications[].label
Atomistic processes of dislocation generation and plastic deformation during nanoindentation

# publications[].label
A Comparison of Coulomb Friction and Friction Stress Models Based on Multidimensional Nanocontact Experiments

# publications[].label
A novel pillar indentation splitting test for measuring fracture toughness of thin ceramic coatings

# publications[].label
UV Raman Scattering Analysis of Indented and Machined 6H-SiC and -Si <inf>3</inf> N <inf>4</inf> Surfaces

# publications[].label
Experimental Analysis of the ElasticPlastic Transition During Nanoindentation of Single Crystal AlphaSilicon Nitride

# publications[].label
On the measurement of stressstrain curves by spherical indentation

# publications[].label
Small-scale mechanical behavior of intermetallics and their composites

# publications[].label
Advances in the measurement of hardness at high strain rates by nanoindentation

# publications[].label
Nanoindentation of Fused Quartz at Loads Near the Cracking Threshold

# publications[].label
Microstructural and mechanical property characterization of Argillaceous, Kerogen-rich, and Bituminous shale rocks

# publications[].label
Nanoindentation and the dynamic characterization of viscoelastic solids

# publications[].label
Inaccuracies in Sneddon's solution for elastic indentation by a rigid cone and their implications for nanoindentation data analysis

# publications[].label
Extending the range of constant strain rate nanoindentation testing

# publications[].label
Nanoindentation characterization of coated systems: P:S2- a new approach using the continuous stiffness technique

# publications[].label
Nonequilibrium structures in codeposited Cr-Fe-Ni films

# publications[].label
Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks

# publications[].label
Nanoindentation and nanoscratching of hard coating materials for magnetic disks

# publications[].label
Critical issues in conducting constant strain rate nanoindentation tests at higher strain rates

# publications[].label
Effects of interlayers on the scratch adhesion performance of ultra-thin films of copper and gold on silicon substrates

# publications[].label
On the measurement of material creep parameters by nanoindentation

# publications[].label
Development of pile-up during spherical indentation of elasticplastic solids

# publications[].label
Heat treatment of cathodic arc deposited amorphous hard carbon films

# publications[].label
Measurement of power-law creep parameters by instrumented indentation methods

# publications[].label
Scanning transmission electron microscope observations of defects in as-grown and pre-strained Mo alloy fibers

# publications[].label
Factors limiting the measurement of residual stresses in thin films by nanoindentation

# researcherOn[].label
MRI: Development of and Broad-Based Materials Research with the Next-Generation Nanomechanical Testing Laboratory

# researcherOn[].awardedBy.label
National Science Foundation - (Arlington, Virginia, United States)

# researcherOn[].label
Center for Research Excellence on Dynamically Deformed Solids (CREDDS): Discovering the Role of Heterogeneities in High Strain Rate Mechanical Response-

# researcherOn[].awardedBy.label
United States Department of Energy - (Washington D.C., District of Columbia, United States)

# streetAddress
Texas A&M University; Materials Science & Engineering; 3003 TAMU

# inTheNews[].label
New Technique to Help Develop Stronger Body Armor

# inTheNews[].label
Versatile New Material Family Could Build Realistic Prosthetics, Futuristic Army Platforms